VGR Professional Foil Shaver V-357 User Manual

1. Introduction

The VGR V-357 Professional Foil Shaver is designed for a close and comfortable shave, suitable for both face and bald head grooming. It features dual independent flexing titanium foils, a powerful rotary motor with two-speed adjustments, and an LED display for battery status. Its IPX6 waterproof rating allows for easy cleaning under running water. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.

2. Package Contents

Please check the package for the following items:

• 1 × Foil shaver (for bald head)
• 1 × USB Charging Cable
• 1 × Cleaning Brush
• 1 × Protective Cap
• 1 × Instruction Manual (this document)
• 1 × Spare Shaving Head
• 1 × Storage Bag

3. Key Features

• Dual Independent Flexing Titanium Foils: Double titanium hypoallergenic foils provide a perfect and comfortable cutting experience.
• Powerful Rotary Motor: Equipped with a strong motor offering 2 speed adjustments (7500±500 RPM and 8000±500 RPM) for fast and efficient shaving.
• LED Display: Clearly shows the remaining battery percentage and current RPM, reminding you when to recharge.
• IPX6 Waterproof: The entire body is waterproof, allowing for direct rinsing under the tap for easy cleaning.
• Long Battery Life: Built-in 1400mAh Li-ion battery provides up to 150 minutes of working time after a 2-hour charge.
• Pop-up Trimmer: Integrated trimmer to define straight or curved lines and edges, perfect for sideburns and beard shaping.
• USB Charging: Conveniently charges via USB, compatible with various power sources like computers, laptops, and power banks.

4. Setup

4.1 Initial Charging

Before using your VGR V-357 Foil Shaver for the first time, ensure it is fully charged. This optimizes battery performance and longevity.

1. Connect the small end of the provided USB charging cable to the charging port at the bottom of the shaver.
2. Connect the larger end of the USB cable to a compatible USB power source, such as a computer, laptop, power bank, or a DC 5V 1A USB wall adapter.
3. The LED display on the shaver will illuminate, showing the charging progress and battery percentage.
4. Allow the shaver to charge for approximately 2 hours until the LED display indicates 100% charge. A full charge provides up to 150 minutes of cordless operation.

5. Operating Instructions

5.1 Power On/Off and Speed Adjustment

1. To turn the shaver ON, press the power button located on the front of the device. The LED display will show the current RPM and battery percentage.
2. To adjust the shaving speed, press the power button again. The shaver has two speed settings: 7500±500 RPM and 8000±500 RPM. The display will indicate the selected speed.
3. To turn the shaver OFF, press and hold the power button for a few seconds until the display turns off.

5.2 Shaving

For optimal results, ensure your skin is clean and dry before shaving.

• Hold the shaver at a right angle (90 degrees) to your skin.
• Gently move the shaver against the direction of hair growth.
• The dual independent flexing foils will adapt to the contours of your face or head, providing a close and comfortable shave.

5.3 Using the Pop-up Trimmer

The integrated pop-up trimmer is ideal for detailing and shaping.

• Locate the slide switch on the back of the shaver.
• Slide the switch upwards to deploy the pop-up trimmer.
• Use the trimmer to define straight or curved lines, trim sideburns, or shape your beard with precision.
• After use, slide the switch back down to retract the trimmer.

6. Maintenance

6.1 Cleaning

Regular cleaning ensures optimal performance and hygiene.

1. After each use, turn off the shaver.
2. Rinse the shaving head directly under running water. The IPX6 waterproof design allows for easy wet cleaning.
3. For a more thorough clean, gently remove the foil head from the shaver body.
4. Use the included cleaning brush to remove any trapped hairs from the foils and inner blades.
5. Rinse the foil head and shaver body again if necessary.
6. Allow all parts to air dry completely before reattaching the foil head and storing the shaver.

6.2 Replacing Foils and Blades

To maintain peak shaving performance, the foil head and inner blades should be replaced periodically, typically every 6-12 months, depending on usage frequency and hair type. A spare shaving head is included in your package.

1. Ensure the shaver is turned off.
2. Gently pull the existing foil head upwards to detach it from the shaver body.
3. Align the new foil head with the shaver body and press down firmly until it clicks securely into place.

7. Troubleshooting

8. Specifications

9. User Tips

• For optimal results, especially for bald heads and beard trimming, ensure your skin is clean and dry before using the shaver.
• The shaver is designed for close shaves. If you have longer hair, it's recommended to trim it shorter with a hair clipper before using the foil shaver for the closest finish.
• Remember that a spare shaving head is included in the package, making replacement convenient when needed.

10. Warranty & Support

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the quality of your product.

For warranty claims, technical support, or to inquire about replacement parts (such as additional shaving heads), please contact your retailer or visit the official VGR website for assistance. Please retain your proof of purchase for warranty validation.