1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new 220V Wired Doorbell Panel. Designed for reliability and clear sound, this doorbell is suitable for various environments including homes, offices, and hotels. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Always disconnect power at the main circuit breaker before performing any electrical installation or maintenance. Failure to do so can result in electric shock or serious injury.
- If you are unsure about electrical wiring, consult a qualified electrician.
- Install the doorbell in appropriate locations, avoiding direct exposure to rain and prolonged sunlight to ensure longevity and proper operation.
- This product is designed for indoor use only.
- Do not attempt to open or repair the doorbell casing unless specifically instructed for wiring purposes.
3. Package Contents
- 1 x Wired Doorbell Panel
4. Specifications
| Feature | Specification |
|---|---|
| Material | ABS/PC |
| Working Temperature | -10 to 80 degrees Celsius |
| Bell Sound | Din Don |
| Mounting Hole Distance | 60mm |
| Consumption Power | 0.01W |
| Power | 220V |
| Dimensions | 108 x 108 x 36mm (approx) |
5. Installation and Wiring
Important: Before beginning installation, ensure the main power supply to the installation area is turned OFF at the circuit breaker. Failure to do so can result in electric shock.
The doorbell panel requires a 220V power supply and connects to a doorbell switch. Follow the steps and diagram below for correct wiring:
- Carefully open the doorbell casing to access the internal wiring terminals.
- Inside, you will find two terminals: one for the Live (L) wire and one for the Neutral (N) wire.
- Connect the Live (L) wire from your 220V power supply to the 'L' terminal on the doorbell.
- Connect the Neutral (N) wire from your 220V power supply to the 'N' terminal on the doorbell.
- Connect your doorbell control switch between the Live (L) wire and the doorbell's 'L' terminal, as shown in the diagram. This means the switch interrupts the live feed to the doorbell.
- Ensure all connections are secure and insulated.
- Carefully close the doorbell casing.
- Restore power at the circuit breaker and test the doorbell.
For visual reference of the product, please see the images below:
6. Operation
Once the doorbell panel is correctly installed and wired to a 220V power supply and a doorbell switch, its operation is straightforward:
- Ensure the power supply to the doorbell is active.
- Press the connected doorbell switch. The doorbell panel will emit a clear 'Din Don' sound.
7. Maintenance
To ensure the longevity and optimal performance of your doorbell panel, follow these simple maintenance guidelines:
- Cleaning: Wipe the exterior of the doorbell panel with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the material or internal components.
- Environment: As mentioned in safety information, avoid installing the doorbell in areas exposed to rain or direct, prolonged sunlight.
- Inspection: Periodically check for any visible damage to the casing or wiring (with power off). If damage is found, discontinue use and consult a qualified technician.
8. Troubleshooting
If you encounter issues with your doorbell panel, refer to the following troubleshooting steps:
- Doorbell not ringing:
- Check if the main power supply to the doorbell is active.
- Verify all wiring connections are secure and correctly matched to the Live (L) and Neutral (N) terminals as per the installation diagram. Loose connections are a common cause of malfunction.
- Test the doorbell switch. A faulty switch will prevent the doorbell from ringing.
- Sound unclear or distorted:
- Ensure the power supply is stable and within the specified 220V.
- If the issue persists, the internal components may be damaged. Professional inspection is recommended.
9. User Tips
- Double-check wiring: As highlighted in common questions, ensuring all wiring connections are secure and correctly matched to Live (L) and Neutral (N) terminals is crucial for proper function. A common mistake is incorrect wiring of the switch or power lines.
- Consider professional installation: If you are not comfortable with electrical work, it is always safer to hire a qualified electrician for installation.
10. Warranty and Support
For any questions, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
