1. Product Overview
The QCY H3 ANC Wireless Headphones are designed to provide an immersive audio experience with advanced noise cancellation and high-fidelity sound. Featuring 43dB hybrid active noise cancellation, Hi-Res audio support, and Bluetooth 5.4 connectivity, these headphones offer up to 60 hours of playtime. The ergonomic design includes soft ear pads and a collapsible structure for comfort and portability.

QCY H3 ANC Wireless Headphones
Product feature overview video for QCY H3 headphones, highlighting noise cancellation and adaptive audio.
2. Package Contents
- Headset x 1
- Type-C Charging Cable x 1
- 3.5mm AUX Audio Cable x 1
- User Manual x 1

Contents of the QCY H3 package
3. Product Diagram and Components
Familiarize yourself with the various parts and controls of your QCY H3 headphones.

Overview of QCY H3 Headphone Components and Controls
Key Components:
- Adjustable Slider: For adjusting headband length.
- Foldable Bracket: Allows for compact storage.
- MFB (Multi-Function Button): For power, call, and playback control.
- Vol +/- Buttons: For volume adjustment and track skipping.
- LED Indicator: Displays status (pairing, charging, connected).
- Type-C Charging Port: For charging the headphones.
- 3.5mm AUX Audio Port: For wired connection.
- Microphones (FB, FF, Call Mic): For noise cancellation and clear calls.
- ANC Button: For controlling Active Noise Cancellation modes.
4. Setup Instructions
4.1 Initial Charging
Before first-time use, fully charge your QCY H3 headphones. Connect the Type-C charging cable to the headphone's charging port and plug the other end into a 5V 1A USB adapter or computer USB port. The LED indicator will glow solid red during charging and turn solid white when fully charged.
If the headset is left unused for over two weeks, please recharge it.
4.2 Power On/Off
- Power On: Press and hold the MFB for 2 seconds.
- Power Off: Press and hold the MFB for 4 seconds.
4.3 Bluetooth Pairing
- After powering on, the headset will automatically enter pairing mode. The LED indicator will flash red and white alternately.
- On your mobile device, enable Bluetooth and search for "QCY H3".
- Tap "QCY H3" to connect.
- If a connection record exists, the headset will automatically reconnect to the last paired device upon powering on.
- To manually re-enter pairing mode, power off the headset and then press and hold the MFB for 4 seconds.
4.4 Multi-Point Connection (Connecting to Two Devices Simultaneously)
- Connect the QCY H3 headphones to your first device (Device A) via Bluetooth.
- Turn off Bluetooth on Device A. The headset will then enter pairing mode (LED flashes red and blue alternately).
- On your second device (Device B), enable Bluetooth, search for "QCY H3", and connect.
- Once Device B is connected, turn on Bluetooth on Device A again and connect it to the headset.
- The headphones are now connected to both Device A and Device B simultaneously. You can switch between devices by double-tapping the headset when a call comes in.

Multi-Point Connection Setup
4.5 Factory Reset
To restore the headphones to factory settings:
- Ensure the headset is powered on.
- Press and hold both the Volume Up (+) and Volume Down (-) buttons simultaneously for 10 seconds.
- The red light will flash 3 times, indicating the factory reset is complete. The headset will then enter pairing mode.
4.6 QCY App Installation
For enhanced control and features, download and install the QCY mobile application. The app allows for EQ adjustments, customizable noise canceling levels, and firmware updates.
The QCY App requires Android 8.0 or above / iOS 13.0 or above.

QCY Smart App Interface
5. Operating Instructions
5.1 Button Functions
| Button | Action | Function |
|---|---|---|
| MFB (Multi-Function Button) | Press and hold for 2s | Power On |
| MFB | Press and hold for 4s | Power Off |
| MFB | Single press | Answer/End Call, Playback/Pause |
| MFB | Press and hold for 1.5s | Reject Call |
| MFB | Double press | Gaming Mode |
| MFB | Triple press | Voice Assistant |
| Vol + | Single press | Volume Up |
| Vol - | Single press | Volume Down |
| Vol + | Press and hold for 1s | Next Track |
| Vol - | Press and hold for 1s | Previous Track |
| ANC Button | Single press | Cycle ANC ON, ANC OFF, Transparency Mode |
| ANC Button | Double press (in ANC ON mode) | Turn Adaptive ANC On/Off |
5.2 Active Noise Cancellation (ANC) Modes
The QCY H3 headphones feature 4 noise canceling modes to adapt to various environments:
- Indoor Mode: Ideal for quiet environments like offices, libraries, and cafes.
- Outdoor Mode: Suitable for shopping malls and stations.
- Commuting Mode: Best for noisy environments such as subways, public buses, and airplanes.
- Anti-wind Noise: Designed for activities like riding, outdoors, and driving.
Press the ANC Button to cycle through ANC ON, ANC OFF, and Transparency modes. You will hear a voice prompt for each mode change. In ANC ON mode, double-press the ANC Button to activate or deactivate Adaptive ANC.

4 Noise Canceling Modes
5.3 Transparency Mode
Transparency Mode allows you to hear ambient sounds clearly while still enjoying your music. This is useful for being aware of your surroundings when shopping, walking, or chatting, without needing to remove your headphones.

Transparency Mode in use
5.4 Wired Mode
The QCY H3 headphones support a wired connection using the included 3.5mm AUX audio cable. This allows for versatile use with devices that do not support Bluetooth or when you prefer a wired connection.
Important Note for Wired Mode: When using the 3.5mm AUX cable, the headset operates in a passive mode, supporting only audio output. Bluetooth functions (such as ANC, EQ, etc.) and the built-in microphone are not available. To use these functions, switch back to wireless mode and ensure Bluetooth is connected.

Wired Mode Connection
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | QCY H3 |
| Certified Model | BH23H3A |
| Pairing Name | QCY H3 |
| Compatibility | iOS / Android |
| Operation Range | 10m |
| Playback Time | Approx. 60 hours (ANC OFF) / 35 hours (ANC ON) |
| Bluetooth Profiles | A2DP / AVRCP / HFP |
| Battery Capacity | 500mAh |
| Charging Time | About 2 hours |
| Charging Port | Type-C |
| Headphone Dimensions | 160.2 * 81.7 * 196.8mm |
| Weight | 260g |
| Material | ABS, Plastic, Leather |
| Driver Diameter | 40mm |
| Frequency Response Range | 20 - 20000Hz (up to 40kHz with Hi-Res Audio) |
| Impedance Range | 33 to 100 Ω |
| Total Harmonic Distortion | 3% |
| Waterproof | Yes |
| Voice Assistant Built-in | Yes |
| Active Noise-Cancellation | Yes (Hybrid 43dB) |
| Sound Isolating | Yes |
| Earcups Type | Sealed |
| Headphone Pads Material | Memory Foam |

Headphone Size Diagram
7. Troubleshooting
If you encounter any issues with your QCY H3 headphones, please refer to the following common solutions:
- Headset unable to turn on: Confirm the headset has power. If not, connect it to a USB power source using the included Type-C cable for charging.
- Mobile phone cannot connect: Delete the existing pairing record for "QCY H3" on your mobile device, then re-search and pair the headphones.
- No sound during music or calls: First, try increasing the volume using the Vol+ button. If there's still no sound, for Android phones, go to Bluetooth settings, find "QCY H3", and try toggling "Phone audio" and "Media audio" off and on. If the issue persists, re-pair the headphones with your phone.
- Video/game audio delay: Audio delay can be influenced by the usage environment, network conditions, and your mobile phone's audio codec. Try moving to an environment with less interference.
- Stuttering or intermittent sound: This can be caused by interference from strong Wi-Fi, 5G/4G signals, or high-power electrical appliances nearby. Try changing your environment or re-pairing the headphones.
- Headphones cannot connect to the QCY App: Ensure your phone's language is set to English before attempting to connect the headphones to the app.
- Firmware Update: To update the headphone firmware via the QCY App, navigate to "Device" > "Settings" > "Firmware Upgrade". If the app indicates that an upgrade cannot be made, it means you already have the latest version.
8. User Tips
- For Android users, it is recommended to select SBC in developer options before using Gaming Mode for optimal performance.
- The wired 3.5mm AUX cable does not support microphone functionality. For calls, use Bluetooth mode.
- Regularly check the QCY App for firmware updates to ensure the best performance and access to new features.
- To improve mid- and high-frequency sound quality, upgrade the firmware on the QCY APP.
- Adaptive noise canceling needs to be turned on manually every time you use it; it does not fully self-adapt in real time.
9. Care and Maintenance
- Never disassemble or modify your headset for any reason, as this may lead to damages, fire, electric shock, or complete destruction of the product.
- Do not store the headset in extreme temperatures (below 0°C or above 45°C).
- Avoid using the indicator light close to the eyes of children or animals.
- Do not use the headset during a thunderstorm to prevent dysfunction and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Avoid prolonged use of the headset at high volumes, as this may damage your hearing. Manage your listening time responsibly.
10. Warranty and Support
10.1 Warranty Period
The QCY H3 headphones come with a 12-month warranty from the date of purchase. Please retain your purchase receipt for warranty claims.
10.2 Free Service
During the warranty period, defects caused by quality issues are eligible for free repair, replacement, or return service, according to local regulations. Please contact your distributor with your warranty card and purchase receipt.
10.3 Exclusions from Warranty
The warranty does not cover damages or defects resulting from:
- Unauthorized disassembly or modification.
- Physical damage caused by leaking, dropping, crushing, or exposure to abnormal temperatures/humidity.
- Damage due to acts of God (e.g., natural disasters, lightning).
- Failure to operate according to the user manual or improper human use (e.g., water immersion, corrosion).
10.4 Contact Information
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City, Guangdong Province, China
- Website: www.qcy.com
- Customer Service Phone: 4008-306-708
11. Environmental Information
Under normal usage conditions, the environmental protection use period for this product is 10 years. During this period, the product will not leak any hazardous substances. This product is recyclable and must be disposed of according to local regulations.
Hazardous Substances Table:
| Component | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Headphone Body | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
O: Indicates that the content of the hazardous substance in all homogeneous materials of this component is below the limit requirements specified in GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of this component exceeds the limit requirements specified in GB/T 26572.
12. Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.