WAVLINK WiFi 6 Mesh Router and Range Extender User Manual

1. Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your WAVLINK WiFi 6 Mesh Router and Range Extender. These devices are designed to provide high-performance wireless connectivity, supporting the latest Wi-Fi 6 technology for faster speeds, greater capacity, and improved efficiency.

The product line includes:

• Outdoor AX1800 (Model: WN573HX1): A high-performance outdoor router/AP/repeater with a robust weatherproof design, ideal for extending Wi-Fi coverage in gardens, yards, farms, and other outdoor scenes.
• Indoor AX1800 (Model: LUX DX4): A dual-band Gigabit Wi-Fi 6 mesh router suitable for small to medium homes, offering speeds up to 1.8Gbps.
• Indoor AX3000 (Model: WL-WN586X3 / MIGHTY EX1): A dual-band Wi-Fi 6 Gigabit mesh router designed for gaming and VR, featuring higher speeds and advanced technologies like OFDMA+MU-MIMO.

Please read this manual carefully before using the device to ensure proper installation and optimal performance.

2. Package Contents

Verify that your package contains all the items listed below for your specific model:

2.1. Outdoor AX1800 (WN573HX1)

• WAVLINK WiFi 6 Outdoor Mesh Router/AP/Repeater Unit
• 4 x 8dBi Omnidirectional Fiberglass Tube Antennas
• PoE Converter
• Ethernet Cable (100cm/39.4in)
• Power Adapter Cable (130cm/51.2in)
• Mounting Accessories (Cable Ties, Screws, Wall Plugs, Wrench)
• Quick Start Guide

2.2. Indoor AX1800 (LUX DX4) & AX3000 (WL-WN586X3 / MIGHTY EX1)

• WAVLINK WiFi 6 Mesh Router Unit
• Ethernet Cable
• Power Adapter
• Quick Start Guide

3. Specifications

4. Setup Instructions

4.1. Outdoor AX1800 (WN573HX1) Installation

Antenna and Ethernet Cable Installation:

1. Pass the RJ45 cable through the waterproof connector cover.
2. Screw the waterproof seal into the waterproof connector bracket.
3. Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
4. Place the waterproof sealing ring on the waterproof connector bracket.
5. Connect the RJ45 cable to the WAN/LAN port on the device.
6. Screw the connecting cables into the 2.4G and 5G antenna connectors and tighten them securely.

Note: The PoE converter is not waterproof; please install it indoors. Ensure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.

Product Mounting on a Column:

1. Attach two silicone pads to the bracket and the post respectively.
2. Thread the cable ties through the fixing points of the bracket.
3. Secure the product to the post using the cable ties.

Note: For optimal performance, install the product 2-3 meters above the ground.

4.2. Indoor AX1800 (LUX DX4) & AX3000 (WL-WN586X3) Setup

1. Connect the router to your modem and then connect the power adapter to the router and a power outlet.
2. Press the power button to turn on the device.
3. Reset the router (if necessary) by holding the Reset button for 6 seconds (for AX3000) or following the Quick Start Guide for AX1800.
4. Connect to the router's Wi-Fi network using a computer or mobile device. The default Wi-Fi name (SSID) and password can usually be found on a label on the bottom of the router.
5. Open a web browser and navigate to the router's web management page (e.g., wavlogin.link or 192.168.10.1). The initial password is often "admin".
6. Follow the on-screen guide to configure your Wi-Fi settings, including changing the Wi-Fi name and password, and reconnect your devices after completion.

5. Operating Modes

WAVLINK devices support various operating modes to suit your networking needs:

5.1. Outdoor AX1800 (WN573HX1) Modes

• Mesh Extender Mode: Extends your existing mesh network.
• Repeater Mode: Extends the range of your existing Wi-Fi network.
• Router Mode: Functions as a primary router, connecting to your modem.
• AP (Access Point) Mode: Converts a wired network into a wireless one.
• AP+Repeater Mode: Combines Access Point and Repeater functionalities.

5.2. Indoor AX1800 (LUX DX4) & AX3000 (WL-WN586X3) Modes

• Mesh Controller Mode: Acts as the central hub for your mesh network.
• Mesh Agent Mode: Extends the mesh network from a Mesh Controller.
• Router Mode: Functions as a primary router.
• AP (Access Point) Mode: Converts a wired network into a wireless one.

These devices utilize dual-band technology: the 2.4GHz band is ideal for general web browsing and social media, while the 5GHz band is best for high-bandwidth activities like video streaming and online gaming.

6. Maintenance

To ensure the longevity and optimal performance of your WAVLINK device:

• Outdoor AX1800 (WN573HX1): The IP67 weatherproof enclosure and 15kV ESD protection are designed to withstand harsh outdoor conditions. Regularly check for any physical damage to the casing or antennas. Ensure all cable connections are secure and waterproof seals are intact.
• Indoor Models: These devices feature optimal thermal performance with super heat dissipation designs. Ensure they are placed in a well-ventilated area, away from direct sunlight or heat sources, to prevent overheating.
• Firmware Updates: Regularly check for and install the latest firmware updates through the Cloud APP or web management interface. Firmware updates often include performance improvements, security patches, and new features.
• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosol sprays.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• No Internet Connection:
  
  • Check all cable connections (Ethernet, power) to ensure they are secure.
  • Verify that your modem is working correctly.
  • Restart your router and modem.
  • Log in to the web management page to check your WAN settings (PPPoE, Dynamic IP, Static IP).
• Weak Wi-Fi Signal or Dead Zones:
  
  • For Outdoor AX1800, ensure it is mounted at an optimal height (2-3 meters above ground) and the antennas are correctly oriented.
  • For Indoor models, reposition the router to a central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
  • Utilize the Mesh feature to expand coverage with additional WAVLINK mesh devices.
  • The device features technologies like Beamforming and LDPC Error Correction to improve signal quality and remove dead corners.
• Slow Network Speed or Congestion:
  
  • Ensure your internet service provider (ISP) is delivering the expected speeds.
  • Reduce the number of connected devices or prioritize critical devices using QoS (Quality of Service) settings in the router's web interface.
  • The OFDMA and MU-MIMO technologies help reduce network congestion and improve efficiency for multiple devices.
  • For Indoor AX1800/AX3000, press the TURBO button to clear cache and optimize the network.
• Unable to Access Web Management Page:
  
  • Ensure your device is connected to the router's Wi-Fi or via an Ethernet cable to a LAN port.
  • Verify you are using the correct IP address (e.g., 192.168.10.1) or domain (wavlogin.link).
  • Clear your browser's cache or try a different browser.
• Forgotten Wi-Fi Password or Login Password:
  
  • You can reset the router to factory default settings by pressing and holding the RESET button for 6 seconds (for AX3000) or as indicated in your Quick Start Guide. This will erase all custom settings, and you will need to reconfigure the router.

8. User Tips

• Power Supply: Always use the provided power adapter. For the Outdoor AX1800, ensure the PoE converter is installed indoors as it is not waterproof.
• Optimal Placement: For outdoor units, consider mounting them high enough to clear obstructions and maximize signal reach. For indoor units, a central location is usually best.
• Mesh Networking: If you have multiple WAVLINK mesh-compatible devices, leverage the "Everything Mesh" technology for seamless roaming and extended coverage with a single Wi-Fi name. The Outdoor WN573HX1 supports interconnection with WN531AX2, WN583AX1, and other WN573HX1 units for mesh mode.
• Guest Network: Utilize the guest network feature for visitors to keep your main network secure.
• Security: Regularly update your Wi-Fi password and use strong, unique passwords. The WPA3 security protocol offers enhanced protection.
• Device Battery Life: The Target Wakeup Time (TWT) technology in WiFi 6 routers can help save battery life for connected devices by scheduling when they wake up to send or receive data.

9. Warranty and Support

Warranty: All WAVLINK products come with a 1-year warranty from our store.

Technical Support: If you encounter any issues or have questions, please contact our customer support. Most emails will be answered within 24 hours.

For further assistance, please refer to the official WAVLINK website or the Quick Start Guide included in your package.

10. Product Overview Video

Watch this video for a visual overview of the WAVLINK Wi-Fi 6 AX1800 Outdoor Range Extender and its features, including outdoor use cases and weather resistance.