PuRuiKai N361 Robot Window Cleaner Instruction Manual

1. Introduction

The PuRuiKai N361 Robot Window Cleaner is an advanced, ultra-thin device designed to automate the cleaning of various glass surfaces. Featuring intelligent navigation, powerful suction, and remote control operation, it provides a convenient and efficient solution for maintaining spotless windows, tiles, and mirrors. This manual provides essential information for the safe and effective use of your new window cleaning robot.

2. Product Features

• Ultra-thin Design: Allows access to hard-to-reach areas and fits easily under furniture.
• Robot Technology: Ensures efficient and thorough cleaning with automated operation.
• Remote Control Operation: Conveniently operate the cleaner from a distance.
• Versatile Cleaning: Designed for glass surfaces, tiles, fiberglass, and framed bathroom mirrors, ensuring spotless and streak-free results.
• Automatic Recognition: The device automatically assesses the cleaning environment for safe and worry-free operation.
• Intelligent Planning: Utilizes bow-shaped row-by-row wiping for high coverage and minimal missed spots.
• Safety Ropes: Equipped with safety ropes with a tensile strength of 150kgf for secure operation.
• Power Failure Protection: Maintains powerful adsorption for 20 minutes after a sudden power failure and sounds an alarm.
• Abnormal Alerts: Flashes a red light and sounds a warning tone in case of pressure leakage, air leakage, or other abnormalities.
• Replaceable Cleaning Cloths: Microfiber fabric cloths provide a good cleaning effect and are easily removable and replaceable.
• Low Noise Operation: Operates quietly, with noise levels between 40-60dB.
• Tight Fit Spin Rubbing: Larger cleaning wheels extend to the edge of window frames for thorough edge cleaning, supported by smart sensors.
• Deep Cleansing: Imitates manual wiping with negative pressure cleaning for dry and clean surfaces.
• Automatic Obstacle Avoidance: Intelligently senses edges and handles, navigating around them.
• Ultra-High Speed Cleaning: Achieves a cleaning speed of 16cm/s thanks to an upgraded motor.
• All-Around Stain Removal: Dual cleaning wheels with synchronized high-speed rotation and 50N pressure provide strong attraction (5600Pa) to erase stubborn stains.

Figure 2.1: Key features of the PuRuiKai N361 Robot Window Cleaner.

Figure 2.2: Automatic recognition and intelligent path planning.

Figure 2.3: Safety features and cleaning cloth details.

Figure 2.4: Deep cleansing and obstacle avoidance mechanisms.

3. Package Contents

Please check the package contents upon arrival to ensure all items are present:

• 1 x PuRuiKai N361 Host (Robot Window Cleaner)
• 1 x Power Cord + Adapter
• 1 x Remote Control
• 2 Pairs (4 pieces) of Cleansing Loops
• 1 x 4-meter Extension Cord
• 1 x Safety Line
• 10 x Cleaning Cloths
• 1 x User Manual (English Guide)
• 1 x Box

Figure 3.1: Contents of the product package.

4. Setup

1. Attach Cleaning Cloths: Securely attach the cleansing loops (microfiber cloths) to the rotating pads on the underside of the robot. Ensure they are properly aligned and cover the pads.
   

   Figure 4.1: Attaching the cleaning cloths.

2. Connect Power Adapter: Plug the power adapter into the robot's power input port and then into a wall outlet. The machine must be plugged in during operation.
   

   Figure 4.2: Connecting the power adapter.

3. Attach Safety Rope: For safety, always attach the safety rope to a secure fixture (e.g., a window handle or a sturdy anchor point) before placing the robot on the window. Hook the carabiner end of the safety rope to the fixture.
   

   Figure 4.3: Securing the safety rope.
4. Prepare Cleaning Surface: For optimal results, lightly spray the cleaning solution onto the window surface or the edges of the cleaning cloths. Do not saturate the cloths directly with water.
   

   Figure 4.4: Preparing the cleaning surface.

5. Operating Instructions

1. Power On: After connecting the power and safety rope, place the robot firmly on the window surface. Press the power switch on the robot or use the remote control to turn it on. The robot will power on within 3-5 seconds.
   

   Figure 5.1: Powering on the device.
2. Start Cleaning: Once powered on, the robot will automatically adhere to the surface and begin its cleaning cycle based on its intelligent planning. You can also use the remote control to select specific cleaning modes or direct the robot manually.
   

   Figure 5.2: Remote control operation.

3. Monitoring Operation: The robot is designed to clean efficiently and avoid obstacles. In case of power failure, the internal battery provides 20 minutes of backup power, and an alarm will sound. If abnormal alerts (pressure/air leakage) occur, a red light will flash, and a warning tone will sound.
4. Finishing Cleaning: Once the cleaning cycle is complete, the robot will stop. Carefully remove it from the surface, ensuring the safety rope is still attached.

6. Maintenance

• Cleaning Cloths: The microfiber cleaning cloths are removable and washable. After each use, remove the cloths and wash them thoroughly. Replace them with clean cloths for the next cleaning session.
• Robot Body: Wipe the robot's body with a soft, dry cloth to remove any dust or residue. Do not use abrasive cleaners or immerse the robot in water.

7. Troubleshooting

If you encounter any issues with your PuRuiKai N361 Robot Window Cleaner, please refer to the following common problems and solutions:

• Robot not adhering to the surface:
  • Ensure the power adapter is securely plugged in and the robot is receiving continuous power.
  • Check if the cleaning cloths are too wet; they should be slightly damp, not soaked.
  • Verify that the suction cups are clean and free from debris.
• Robot leaving streaks or not cleaning effectively:
  • Replace dirty cleaning cloths with fresh ones.
  • Adjust the amount of cleaning solution sprayed on the surface or cloths. Too much or too little can cause streaking.
  • Ensure the surface is free from large debris before starting.
• Robot not moving or getting stuck:
  • Check for any physical obstructions on the window surface or around the robot.
  • Ensure the power cord is not tangled or restricting movement.
  • If an abnormal alert (red light/warning tone) is active, refer to the "Abnormal Alerts" feature description.
• Robot falls during operation:
  • Always ensure the safety rope is securely attached to a fixed point before operation.
  • The internal battery provides temporary power in case of power loss; if the robot falls, it indicates a severe power interruption or a failure in the safety mechanism. Immediately cease use and contact support.

If the problem persists after trying these steps, please contact customer support for further assistance.

8. Specifications

Figure 8.1: Product Parameters.

9. User Tips

• Continuous Power: Always operate the robot with the power adapter plugged in. The internal battery is a safety feature designed to prevent falls during sudden power outages, not for cordless operation.
• Safety First: Never operate the window cleaner without securely attaching the safety rope to a stable anchor point. This is crucial for preventing accidents.
• Optimal Cleaning Solution: For best results, lightly spray cleaning solution onto the window surface or the edges of the cleaning cloths. Avoid directly soaking the cloths, as excessively wet cloths can reduce suction and cleaning effectiveness.
• Surface Compatibility: The robot is suitable for various smooth surfaces including glass, tile walls, fiberglass, and framed mirrors.
• Cleaning Area Limits: Be aware of the maximum cleaning area: 6 meters in height and 5 meters in width.

10. Warranty and Support

The PuRuiKai N361 Robot Window Cleaner has passed rigorous quality inspections and holds CE, FCC, and ROHS certifications. The power supply is also certified with CCC, CE, FCC, UL, and ROHS for security.

If you encounter any problems upon receiving the product, or if you are unsure how to use it, please contact customer support. They can provide assistance, answer questions, and provide working videos if needed.