Puruikai PRK01-N361 Smart Window Cleaning Robot User Manual
Introduction
Welcome to the Puruikai PRK01-N361 Smart Window Cleaning Robot. This manual provides essential information for the safe and effective operation of your new device. Please read it carefully before use.
Safety Precautions
Your safety is paramount. Always adhere to the following precautions:
- [Warning symbol] Do not operate the robot in rain or near water sources.
- [Warning symbol] Ensure the power adapter is correctly connected to a suitable power outlet.
- [Warning symbol] Keep the power cord away from heated surfaces.
- [Warning symbol] Do not use the robot if the power cord or plug is damaged.
- [Warning symbol] Always attach the safety rope securely to a stable anchor point before operation.
- [Warning symbol] This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- [Warning symbol] Children should be supervised to ensure that they do not play with the appliance.
- [Warning symbol] Do not operate the robot without a cleaning cloth attached.
- [Warning symbol] Ensure the window surface is clean and free from debris that could damage the robot or the glass.
- [Warning symbol] Do not attempt to repair the robot yourself. Contact authorized service personnel.
Product Overview
The Puruikai PRK01-N361 is designed for automated window cleaning. Key components include:
- Main Body: Houses the motor, suction fan, sensors, and control circuitry.
- Cleaning Pad: A rotating or oscillating pad that holds the cleaning cloth to scrub the window surface.
- Suction System: Creates a vacuum to adhere the robot to the window.
- Edge Detection Sensors: Prevent the robot from falling off the window edges.
- Power Button: Located on the main body for manual control.
- Safety Rope: A tether to prevent the robot from falling in case of power failure or detachment.
- Power Adapter & Cable: Connects the robot to the power source.
- Cleaning Cloths: Reusable cloths for applying cleaning solution and wiping.
Refer to the included diagram in the original PDF for visual placement of these components.
Getting Started
- Charging: Connect the power adapter to the robot and a wall outlet. Allow the robot to charge fully before first use. A charging indicator light will show the status.
- Attaching the Safety Rope: Securely fasten the safety rope to the robot and a sturdy anchor point on the window frame.
- Attaching the Cleaning Cloth: Place a clean, damp cleaning cloth onto the cleaning pad as per the instructions (e.g., velcro or clips).
- Powering On: Press the power button on the robot. The robot will activate its suction.
- Placement: Gently place the robot onto the window surface, ensuring it adheres securely.
Operation
The PRK01-N361 can be operated via its onboard controls or a companion mobile application (if applicable). Follow these general steps:
- Manual Operation: Press the power button to start cleaning. The robot will begin its programmed cleaning path. Press the power button again to stop.
- App Control (if applicable): Download the Puruikai app, connect your robot via Bluetooth or Wi-Fi, and select cleaning modes, start/stop, or manual directional control.
- Cleaning Modes: The robot may offer different modes such as Auto, Edge Cleaning, or Spot Cleaning. Select the appropriate mode for your needs.
- Completion: Once cleaning is finished, the robot may return to its starting point or stop. Carefully retrieve the robot from the window.
Maintenance
Regular maintenance ensures optimal performance and longevity:
- Cleaning Cloths: Remove used cleaning cloths after each use. Wash them by hand or in a washing machine according to their care instructions. Ensure they are dry before storing.
- Robot Exterior: Wipe the exterior of the robot with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Sensors: Gently clean the edge detection sensors with a dry, soft cloth to ensure accurate operation.
- Storage: Store the robot in a cool, dry place, away from direct sunlight.
Troubleshooting
Here are solutions to common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot not adhering to the window | Insufficient suction power; dirty window surface; cleaning cloth not attached properly; power issue. | Ensure the window is clean. Check that the cleaning cloth is correctly attached. Verify the robot is powered on and the suction fan is running. Check the power connection. |
| Robot stops mid-cleaning | Low battery; obstacle detected; safety rope obstruction; sensor error. | Charge the robot. Check for obstructions. Ensure the safety rope is not tangled. Clean sensors. Restart the robot. |
| Unsatisfactory cleaning results | Dirty cleaning cloth; incorrect cleaning mode; window excessively dirty. | Use a clean cloth. Select an appropriate cleaning mode. Pre-clean heavily soiled windows manually. |
| Robot falls off the window | Safety rope not attached; power failure; strong wind; improper placement. | Always attach the safety rope. Ensure stable power. Avoid use in very windy conditions. Ensure proper initial placement. |
Specifications
Technical details for the Puruikai PRK01-N361:
- Model: PRK01-N361
- Power Input: AC 100-240V, 50/60Hz
- Robot Power Output: DC 24V
- Battery Type: Rechargeable Lithium-ion
- Charging Time: Approx. 2-3 hours
- Working Time: Approx. 90-120 minutes
- Suction Power: [Value not specified in input, assuming placeholder]
- Dimensions: [Value not specified in input, assuming placeholder]
- Weight: [Value not specified in input, assuming placeholder]
- Safety Rope Length: [Value not specified in input, assuming placeholder]
Specifications are subject to change without notice.
Warranty Information
Puruikai offers a limited warranty for the PRK01-N361. Please refer to the warranty card included with your product or visit the official Puruikai website for full terms and conditions.
For support and service, please visit Puruikai Official Website.
