1. Introduction
The PGST PG-107 4G Tuya Wireless Home WIFI GSM Home Security System is a comprehensive solution designed to protect your property and provide peace of mind. Featuring a 4.3-inch IPS touchscreen, this system offers intuitive operation and supports both Wi-Fi and 4G GSM networking for reliable communication. It integrates seamlessly with the Tuya Smart Life app, allowing for remote control and monitoring. The system supports a wide range of wireless and wired sensors, making it highly customizable to suit various security needs.
Video: PGST PG-107 Alarm System Demonstration
Video: PGST PG-107 Product Overview
2. Setup
2.1 Unpacking and Initial Inspection
Carefully unpack all components and ensure all items listed in your specific kit are present. Inspect for any visible damage.
2.2 Alarm Panel Overview
Diagram: Alarm Panel Front, Back, and Side Views
The alarm panel features an SOS button, RFID sensing area, and a capacitive IPS touchscreen on the front. The back includes a built-in anti-tamper switch. The side view shows the microphone. Dimensions are 160*98*19mm.
2.3 Powering the Alarm Panel
- Insert SIM Card: Locate the SIM card slot on the back of the alarm panel. Insert a 4G compatible SIM card.
- Connect Power: Connect the DC 5V power adapter to the 5V USB port on the back of the panel.
- Activate Battery: The system has a built-in 1000mAh lithium backup battery. Ensure it is turned on for continuous operation during power outages.
- Power ON/OFF: Use the power switch on the back of the panel to turn the system on.
Diagram: Alarm Panel Connections
2.4 Connecting Wired Components
The alarm panel supports 4 wired zones and a wired siren. To connect wired components:
- Wired Siren: Connect the wired siren to the 'Wired Siren Jack' port on the back of the panel.
- Wired Defense Zones: Connect wired sensors (e.g., wired PIR detectors) to the 'Wired Defense Zone Socket' ports. Refer to the sensor's specific instructions for wiring details.
Diagram: Wired Siren Connection
2.5 Pairing Wireless Sensors and Accessories
The system supports up to 99 wireless zones and 100 remote controllers/RFID cards. Follow these general steps to pair wireless devices:
- Enter Pairing Mode: On the alarm panel's touchscreen, navigate to the 'Settings' or 'Add Device' menu to put the system into pairing mode for wireless sensors.
- Activate Sensor: Trigger the wireless sensor (e.g., open a door for a door sensor, wave hand in front of a PIR sensor, press a button on a remote control or SOS button, tap an RFID card). The panel should detect the device.
- Assign Zone: Assign the detected device to a specific wireless zone and give it a descriptive name (e.g., "Front Door," "Living Room PIR").
- Repeat: Repeat for all wireless PIR motion sensors, door/window sensors, remote controllers, RFID tags, smoke detectors, gas detectors, SOS buttons, doorbell buttons, wireless keypads, wireless sirens, and IP cameras.
Diagram: Example Sensor Placement
2.6 App Installation and Setup (Tuya Smart Life)
- Download App: Download the "Tuya Smart" or "Smart Life" app from your smartphone's app store (Android/iOS).
- Register/Login: Create an account or log in to your existing account.
- Add Device: In the app, tap '+' to add a new device. Select the alarm system category or use auto-scan.
- Connect to Wi-Fi: Follow the in-app instructions to connect the alarm panel to your home Wi-Fi network.
- Link IP Camera (Optional): If you have a Tuya IP camera, link it through the app. When an alarm is triggered, the camera can initiate motion detection recording.
Image: Tuya Smart Life App Integration
3. Operating Instructions
3.1 Arming and Disarming
The system can be armed or disarmed using multiple methods:
- Touchscreen: Use the 'Arm' and 'Disarm' icons on the main interface of the alarm panel.
- Remote Controller: Press the 'Arm' or 'Disarm' button on your remote control.
- RFID Tag: Tap an authorized RFID tag on the RFID sensing area of the panel.
- Mobile App: Use the 'Arm' or 'Disarm' functions within the Tuya Smart Life app.
- Scheduled Arm/Disarm: Set specific times for the system to automatically arm or disarm via the panel settings or mobile app.
Image: Scheduled Arm/Disarm
3.2 SOS Function
In case of emergency, press the 'SOS' button on the alarm panel or the remote control. The system will immediately trigger an alarm and notify pre-set emergency contacts.
3.3 Two-way Voice Intercom
The alarm panel supports two-way voice intercom. You can make and receive calls directly from the panel or through the mobile app, allowing communication with occupants or deterring intruders remotely.
Image: Two-way Voice Intercom
3.4 Alarm Notifications (Phone Call/SMS)
When an alarm is triggered, the system will:
- Send push notifications to your smartphone via the Tuya Smart Life app.
- Send SMS messages to up to 5 pre-set phone numbers.
- Make phone calls to up to 5 pre-set phone numbers.
Image: 5 Groups Alarm Phone Number
3.5 Door Open Alert
The system provides immediate alerts on the panel and your smartphone if a door or window equipped with a sensor is opened while the system is armed or in a monitoring state.
Image: Door Open Alert
3.6 Language Settings
The alarm panel supports 10 languages. To change the language, navigate to the system settings on the touchscreen and select your preferred language from the available options: Chinese, English, Russian, German, Spanish, Polish, Greek, Italian, French, Portuguese.
Image: Multi-language Support
4. Maintenance
4.1 Backup Battery Management
The system features a built-in rechargeable 1000mAh lithium battery. It automatically switches to battery power during a main power failure. The system will provide a low battery alarm when the backup battery needs charging or replacement.
Image: Battery Status and Anti-disassembly Alarm
4.2 Anti-Disassembly Alarm
The alarm panel is equipped with a built-in anti-pry switch. If the panel is tampered with or forcibly removed from its mounting, an anti-disassembly alarm will be triggered, enhancing system security.
Image: Anti-Disassembly Switch
4.3 General Care
- Keep the alarm panel and sensors clean and free from dust.
- Avoid exposing the devices to extreme temperatures or humidity.
- Regularly check sensor batteries and replace them as needed.
5. Troubleshooting
5.1 Wired Connections
If wired components are not functioning, ensure they are correctly connected to the 'Wired Siren Jack' or 'Wired Defense Zone Socket' as shown in the connection diagram. Verify that the wiring is secure and free from damage. For specific wired sensor issues, consult the sensor's individual manual.
5.2 Wireless Sensor Not Responding
- Check the battery of the wireless sensor and replace if necessary.
- Ensure the sensor is within the effective range of the alarm panel.
- Re-pair the sensor with the alarm panel following the pairing instructions in Section 2.5.
5.3 No App Notifications
- Verify that the alarm panel is connected to a stable Wi-Fi network.
- Check your smartphone's notification settings for the Tuya Smart Life app to ensure notifications are enabled.
- Ensure your phone has an active internet connection.
5.4 No Phone Calls/SMS Alerts
- Ensure a working 4G SIM card is correctly inserted into the alarm panel and has sufficient credit/data.
- Verify that the pre-set alarm phone numbers are correct in the system settings.
- Check the SMS on/off and voice on/off settings for each pre-set number.
6. Specifications
Image: Technical Parameters
| Feature | Specification |
|---|---|
| Model Number | PG107 4G |
| Display | 4.3 inch Touch Screen (IPS) |
| Communication Interface | Wireless |
| Network | 4G, WIFI (IEEE802.11b/g/n) |
| GSM System | 850/900/1800/1900MHz |
| Wireless Frequency | 433Mhz |
| Wireless Coding | eV1527 |
| Zone Number | 99 wireless zones, 4 wired zones |
| Output Number | 5 alarm phones & APP & SMS |
| Arming Type | APP |
| Password Keyboard | Yes |
| Video Interface | Yes |
| Input Voltage | DC 5V (Micro USB Standard Interface Power Supply) |
| Working Current | <140mA (screen off), <280mA (screen on) |
| Standby Current | 0uA (screen off), <80uA (screen on) |
| Siren Output | <560mA |
| Spare Battery | 3.7V/1000mAh Lithium battery |
| Working Temperature | -10 ~ 55 °C |
| Relative Humidity | < 80% (no condensation) |
| Product Size | 160*98*19mm (length x height x thickness) |
| Smart Home Platform | Tuya |
| Voice Control | Support Alexa / Google Assistant |
| Certification | CE, RoHS |
7. User Tips
- Initial Battery Activation: Remember to turn on the built-in battery when first using the alarm panel to ensure continuous operation and backup power.
- Wired Connections: For wired components, double-check all connections to the designated ports on the back of the alarm panel. Ensure wires are securely fastened to prevent intermittent issues.
- Smart Life App: The system is fully compatible with the Tuya Smart Life app for remote control and monitoring. Ensure the app is updated to the latest version for optimal performance.
- Customization: Take advantage of the 99 wireless zones and 4 wired zones to customize your security setup. You can add various sensors like PIR detectors, door/window sensors, smoke detectors, and gas detectors to create a comprehensive prevention and control system.
8. Warranty and Support
The PGST PG-107 Home Security System typically comes with a 12 to 18-month warranty period. For any technical assistance, troubleshooting, or warranty claims, please contact your seller or refer to the official PGST support channels. Ensure you retain your proof of purchase for warranty validation.
