BASEUS BD1

Contents

Baseus Bass BD1 Wireless Earphones

Model: BD1 (PM139)

User Instruction Manual

1. Introduction

The Baseus Bass BD1 Wireless Earphones are designed to provide a comfortable and immersive audio experience. Featuring Bluetooth 5.4 for stable connectivity, IP55 dust-and-water resistance for active lifestyles, and a long-lasting battery, these mini bean-shaped earbuds deliver powerful bass and clear sound. This manual will guide you through the setup, operation, and maintenance of your new earphones.

2. Package Contents

Please check the box for the following items:

  • Baseus Bass BD1 Wireless Earbuds (Left and Right)
  • Charging Case
  • USB-C Charging Cable
  • Replaceable Ear Pads Set (various sizes)
  • User Manual
Baseus Bass BD1 Earphones package contents including earbuds, charging case, USB-C cable, and ear tips.
Figure 2.1: Package Contents

3. Product Overview

The Baseus Bass BD1 earphones feature a compact, ergonomic bean-shaped design for a snug and comfortable fit. The charging case is also mini and portable, making it easy to carry.

Baseus Bass BD1 Wireless Earphones and Charging Case
Figure 3.1: Earbuds and Charging Case
Dimensions of Baseus Bass BD1 Earbuds and Charging Case
Figure 3.2: Product Dimensions

4. Setup & Pairing

  1. Initial Charge: Before first use, place both earbuds into the charging case and connect the case to a power source using the provided USB-C cable. Ensure the earbuds and case are fully charged.
  2. Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode.
  3. Pairing: On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices. Select "Baseus Bass BD1" from the list.
  4. Connection Confirmation: Once connected, you will hear an audio prompt, and the LED indicator on the earbuds will change.
  5. Multipoint Connection (BSC): The Baseus Smart-Connect (BSC) technology allows you to effortlessly switch between two paired devices without manually disconnecting and reconnecting. Ensure both devices are paired and within range.
Baseus Smart-Connect (BSC) Multipoint Connection feature
Figure 4.1: Multipoint Connection

5. Operating Instructions

5.1 Basic Controls

The Baseus Bass BD1 earphones feature touch controls for managing playback and calls. Specific gesture settings can be customized via the Baseus App.

5.2 Calls

Equipped with Dual-Mic Environmental Noise Cancellation (ENC) technology, the earbuds ensure clear private calls by reducing ambient noise.

5.3 Independent Earbud Use

You can use either the left or right earbud independently. Simply leave one earbud in the charging case and use the other for mono audio.

5.4 Baseus App Customization

Download the official Baseus App to unlock advanced features and personalize your listening experience:

  • Find Your Earbuds: Locate misplaced earbuds.
  • Track Battery: Monitor the battery level of each earbud and the charging case.
  • Fine-Tune Settings: Adjust audio preferences, including EQ modes and Bass Boost.
  • Low Latency Mode: Optimize for gaming to reduce sound delay (0.06s latency).
  • Gesture Settings: Customize touch controls for playback, calls, and voice assistant activation.
Baseus App interface showing customizable settings for earbuds
Figure 5.1: Baseus App Interface

6. Charging

To charge your Baseus Bass BD1 earphones:

  1. Place the earbuds into the charging case.
  2. Connect the charging case to a USB power source using the provided USB-C cable.
  3. The charging indicator on the case will show the charging status.

Battery Life:

  • Up to 8 hours of playtime per charge (at 50% volume).
  • Up to 35 hours of total playtime with the charging case.

Baseus Rapid Charge:

  • A quick 10-minute charge provides approximately 2 hours of playtime.
Baseus Rapid Charge feature showing 10 minutes charge for 2 hours playtime
Figure 6.1: Rapid Charge Feature

7. Maintenance & Care

7.1 Cleaning

  • Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
  • Remove ear tips and clean them with water and mild soap if necessary. Ensure they are completely dry before reattaching.
  • Avoid using harsh chemicals or abrasive materials.

7.2 Water and Dust Resistance

The Baseus Bass BD1 earphones are IP55 rated, providing protection against dust ingress and low-pressure water jets from any direction. This makes them suitable for workouts and daily use, but they are not designed for submersion in water or use during showering.

IP55 Dust-and-Water Resistance for Baseus Bass BD1 Earphones
Figure 7.1: IP55 Resistance

7.3 Storage

When not in use, store the earbuds in their charging case to protect them and ensure they remain charged.

8. Troubleshooting

ProblemPossible Solution
Earbuds not pairingEnsure earbuds are charged and in pairing mode (open case). Turn off and on Bluetooth on your device. Forget the device in Bluetooth settings and re-pair.
Only one earbud workingPlace both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid again. Check battery levels for both earbuds in the Baseus App.
Poor sound quality / No bassEnsure earbuds are properly seated in your ears. Try different sized ear tips for a better seal. Adjust EQ settings in the Baseus App.
Earbuds not chargingEnsure the charging cable is securely connected to both the case and the power source. Check if the charging case itself has power. Clean the charging contacts on the earbuds and inside the case.
Lost charging caseThe earbuds require the charging case for charging and pairing. If the case is lost, the earbuds may become unusable once their battery depletes. Consider contacting Baseus support for replacement options.

9. Specifications

FeatureSpecification
Model No.PM139
Bluetooth Version5.4
Communication RangeUp to 10 meters
Battery Life (Earbuds)Approx. 8 hours (at 50% volume)
Total Battery Life (with Case)Approx. 35 hours
Earbud Battery Capacity40 mAh / 0.148 Wh
Charging PortUSB-C
Charging Time (Case)Approx. 1.5 hours
MaterialABS, Plastic (ABS+PC)
WeightApprox. 38.4g (total)
Waterproof RatingIP55 (Dust and Water Resistant)
Frequency Response Range20 - 20000Hz
Impedance Range33 to 100 Ω
Audio CodecsAAC, SBC
Vocalism PrincipleDynamic
FeaturesSound Isolating, Active Noise-Cancellation, Dual-Mic ENC, Multipoint Connection, App Support
Detailed product parameters including name, model, color, material, weight, and battery specs
Figure 9.1: Product Parameters

10. User Tips

  • Ear Tip Selection: Experiment with the included replaceable ear tips to find the best fit for your ears. A good seal is crucial for optimal sound quality, especially for bass, and for comfort, particularly for users with smaller ears.
  • Bass & Noise Cancellation: Users often praise the strong bass and effective noise cancellation. For the best experience, ensure a proper fit and utilize the Baseus App to fine-tune audio settings.
  • Independent Use: The earbuds support independent use, allowing you to use one earbud while the other is in the case. This is convenient for calls or when you need to stay aware of your surroundings.
  • iPhone Compatibility: These Bluetooth earphones are compatible with iPhones and other Bluetooth-enabled devices.
  • ANC Control: Active Noise Cancellation (ANC) is present and can typically be managed through the Baseus App, allowing you to turn it on or off as needed.

11. Warranty & Support

For warranty information, technical support, or service inquiries, please visit the official Baseus website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.