1. Introduction
The Baseus Super Energy Alpha Series Jump Starter 600A is a versatile car jump starter designed for emergency situations. With a 5V/3A output, it can jump-start 12V gas and diesel cars and also serves as a power bank for charging most mobile phones and tablets. Its compact design and robust safety features make it an essential tool for any vehicle owner.
2. Product Specifications
| Feature | Specification |
|---|---|
| Name | Baseus Super Energy Alpha Series Jump Starter 600A |
| Model No. | BS-CH006 |
| Battery Type | Lithium ion |
| Battery Capacity | 6000mAh/22.2Wh |
| Rated Output Capacity | 3700 mAh (5V=3A) |
| Energy Conversion Rate | ≥ 75% |
| Type-C Input | 5V/3A |
| USB A Output | 5V/3A |
| Starting Voltage | 12Vdc |
| Starting Current | 300A |
| Peak Current | 600A |
| Working Temperature | Non-tropical areas, 0°C to 35°C (-20°C to 60°C operational range) |
| Special Features | USB, Lighting, Cigarette Lighter Starter, Warning Light, SOS Lighting |
| External Testing Certification | ROHS, FCC, CE, UL |
| Item Weight | 600g |
| Number Of Built-in Batteries | 4 |
3. Package Contents
- Jump Starter x 1
- User Manual x 1
- Warranty Card x 1
- Smart Alligator Clips x 1
- USB-A to Type-C data cable x 1
4. Setup Instructions
4.1. Product Overview
- Main switch: Power on/off button.
- Flash light: Integrated LED light for illumination.
- Type-C port: For charging the jump starter.
- USB A port: For charging external electronic devices.
- EC5 socket: Connection point for the smart alligator clips.
4.2. Initial Check and Charging
- Before first use, ensure the jump starter is adequately charged. If the battery level is below 50%, charge the device using the provided USB-A to Type-C data cable and a compatible 5V/3A charger.
- Press the main switch to power on the device and check the battery indicator.
5. Operating Instructions
5.1. Jump Starting a Car
- Power On: Press the main switch to ensure the product is powered on.
- Connect Clamps: Plug the smart alligator clips into the EC5 port of the jump starter. The indicator on the clips will flash red and green.
- Attach to Car Battery: Open the engine hood and connect the alligator clips to your car battery. Ensure polarities are connected correctly: red clamp to positive (+), black clamp to negative (-).
- Start Engine: Go back inside your car and start the engine immediately.
- Disconnect: Once the car starts, immediately disconnect the jump starter from the car battery.
Note: For best results, ensure the jump starter's battery level is above 50%. For zero-voltage starts, ensure it's above 75%. The entire jump start process should be completed within 30 seconds.
5.2. Charging Phones/Tablets
The USB A interface provides 5V/3A power output for charging electronic devices such as smartphones and tablets.
5.3. Self-Charging the Jump Starter
The device can be charged via its Type-C interface using the provided USB-A to Type-C data cable and a compatible power adapter.
5.4. Using the Flashlight
Press and hold the flashlight button to turn it on. Double-click to switch between lighting modes (Emergency light, SOS, Strobe light). Double-click again to turn it off.
6. Safety Information
6.1. General Safety Precautions
- Read all instructions before using the product.
- Close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose the power pack to rain or snow.
- Use of attachments not recommended or sold by the manufacturer may result in fire, electric shock, or injury.
- Do not use a battery pack or appliance that is damaged or modified.
- Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
- Do not disassemble the power pack; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in fire or electric shock.
- Avoid actions that could damage the product such as bashing, throwing, or stepping on it.
6.2. Personal Precautions
- Consider having someone close by to assist when working near a battery.
- Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
- Wear complete eye and clothing protection. Avoid touching eyes while working near the battery.
- If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters the eye, immediately flood the eye with running cold water for at least 10 minutes and seek medical attention.
- NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
- Be extra cautious to reduce the risk of dropping the device.
6.3. Hazardous Substances Declaration
This product complies with SJ/T 11364 standards regarding hazardous substances. The environmental protection service life of this product is 5 years. The harmful substances contained in electronic and electrical products will not be leaked or mutated, and the period of normal use will not cause serious pollution to the environment or damage to people and property.
For a detailed declaration on hazardous substances and elements, please refer to the user manual PDF: User Manual (PDF).
7. Maintenance
- Store the product in a cool, dry place away from high temperatures, strong light, intense magnetic fields, or fire sources.
- If water enters the product, allow it to dry naturally before use.
- Keep the EC5 connector and alligator clips clean and free from rust or dirt to ensure optimal performance.
- Do not disassemble the product by non-professionals.
8. Troubleshooting
- Car fails to start:
- Check if the alligator clips are connected properly to the jump starter's EC5 port and the car battery terminals.
- Inspect the contacts for rust or dirt; clean them if necessary.
- Ensure the jump starter's battery level is above 50% (or 75% for zero-voltage starts).
- If the car fails to start three times in a row, stop using the product to avoid damage.
- The product is only for 12V gas/diesel cars, not 24V vehicles.
- Buzzing sound when not connected to car: This indicates the smart clamp is not fully plugged into the jump starter. Re-plug it firmly.
- Product overheating: Do not use the product if it is overheating.
- No output when charging electronics: Avoid using household appliances or loads that exceed the product's output current (5V/3A), as circuit protection may prevent output.
- Automatic shutdown: The product will automatically turn off after 1 minute of no operation.
9. User Tips
- Ensure a good, firm contact between the alligator clamps and the battery terminals. A slight wiggle can help establish better contact.
- This jump starter is effective even in cold temperatures (e.g., -20°C to -25°C), but ensure it's sufficiently charged.
- For optimal performance and longevity, avoid frequent, consecutive jump starts. Allow at least 30 seconds between attempts.
- The compact size makes it easy to store in your car or carry in a backpack, doubling as a convenient power bank for your devices.
- If your car battery is completely dead, the jump starter can still be effective, but ensure its own charge is high (above 75% is recommended for zero-voltage starts).
10. Warranty and Support
For any inquiries or support, please contact Baseus customer service:
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China
- Hotline: +86-4000-712-711
- Website: www.baseus.com
- Official After-sales Email: service@baseus.com (China) / care@baseus.com (Global)
Please retain your purchase receipt and warranty card for any warranty claims.
11. Product Video
Watch a demonstration of the Baseus Jump Starter's features and usage.