BASEUS Bowie H1i

Contents

Baseus H1i ANC Wireless Bowie Headphone User Manual

Model: Baseus Bowie H1i

1. Introduction

Thank you for choosing the Baseus H1i ANC Wireless Bowie Headphones. These headphones are designed to provide a superior audio experience with advanced features like Active Noise Cancellation, Hi-Res Audio, and Immersive Spatial Audio. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Baseus H1i ANC Wireless Bowie Headphones in black
Baseus H1i ANC Wireless Bowie Headphones
Product overview video showcasing the features and design of the Baseus H1i headphones.

2. Key Features

  • Hybrid Active Noise Cancellation (ANC): Up to -38dB noise reduction for an immersive listening experience.
  • Hi-Res Audio with LHDC Decoding: Supports 192kHz/24bit lossless audio, providing 3 times higher definition audio quality.
  • Baseus Immersive Spatial Acoustics (BISA): Proprietary technology for a 3D spatial audio experience in Music Mode and Theater Mode.
  • Extended Battery Life: Up to 100 hours of music playback (volume at 70%, noise reduction off) or 70 hours (volume at 70%, noise reduction on).
  • Bluetooth 5.3: Faster, more stable, and more efficient wireless connection.
  • Dual Channel Low-Latency (DCLL): Ultra-low latency of 0.038s for gaming.
  • Dual Connection: Seamlessly switch between two connected devices.
  • 40mm Bio-Technology Diaphragm: Made of genuine wool for creamy low-end and accurate high-end sound.
  • Comfortable Design: Ergonomic, foldable design with premium artificial leather and ultra-soft ear cups for extended wear.
  • Clear Call Quality: Upgraded built-in microphone ensures clear dialogue.

3. Package Contents

Ensure all items are present in the package:

  • Baseus H1i ANC Wireless Bowie Headphones
  • User Manual
  • Charging Cable (Type-C, 0.3m)
  • 3.5mm Jack Adapter Cable
Contents of the Baseus H1i headphone package, including headphones, charging cable, and 3.5mm audio cable.
Package contents: Baseus H1i headphones, charging cable, and 3.5mm audio cable.

4. Specifications

AttributeValue
Brand NameBASEUS
Model No.Baseus Bowie H1i
MaterialMetal, ABS, Plastic
Battery Capacity600mAh/2.22Wh
Battery Life (ANC off)Up to 100 hours (volume at 70%)
Battery Life (ANC on)Up to 70 hours (volume at 70%)
Maximum Wireless Range<10m
Sound IsolatingYes
Earcups TypeSealed
Number Of Drivers4
Charging MethodCable (Type-C)
Driver Diameter40mm
Impedance RangeUp to 32 Ω
Bluetooth Version5.3
FeaturesWith microphone, Active Noise Cancelling, Dual Connection
CodecsLHDC/AAC/SBC
With MicrophoneYes
Is WirelessYes
Support APPYes
Frequency Response Range20 - 20000Hz (from JSON) / 20Hz-40kHz (from image)
Sensitivity38dB
Active Noise-CancellationYes
Volume ControlYes
Control ButtonYes
Vocalism PrincipleHybrid Technology
Wireless TypeBluetooth
ConnectorsType-C
CommunicationWireless+Wired
StyleOver the Ear
CertificationCE, FCC, RoHS
Rated InputDC5V=600mA
Rated Consumption Current8mA
Fully Charging TimeAbout 2 hours
Weight~226g
Dimensions (approx.)175mm (width) x 185mm (height)

Note: The above parameters are measured manually. It is normal for errors of 3-5mm to occur.

Product parameters diagram showing dimensions and specifications of the Baseus H1i headphones.
Product dimensions and key specifications.

5. Button Functions and Controls

The Baseus H1i headphones feature intuitive controls for easy management of your audio and calls.

Diagram illustrating the functions of the Multifunction Button, Volume Button, and ANC Button on the Baseus H1i headphones.
Button functions and controls.
  • Multifunction Button:
    • Single tap (•): Spatial audio toggle.
    • Two taps (••): Low-latency on/off.
    • Three taps (•••): Answer/hang up calls.
    • Tap and hold (—): Decline calls.
  • Volume Button (+/-):
    • 1.5s hold (- button): Previous track.
    • 1.5s hold (+ button): Next track.
  • ANC Button: Active Noise Cancellation Toggle (Orange: on / Black: off).

6. Setup Guide

6.1. Charging the Headphones

Before first use, fully charge your Baseus H1i headphones.

  1. Connect the provided Type-C charging cable to the charging port on the headphones.
  2. Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port).
  3. The charging indicator light will show the charging status. A full charge takes approximately 2 hours.

6.2. Bluetooth Pairing

To connect your headphones to a device:

  1. Ensure the headphones are powered off.
  2. Press and hold the power button until the indicator light flashes, indicating pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
  4. Select "Baseus Bowie H1i" from the list of devices.
  5. Once connected, the indicator light will change to a steady blue or turn off, depending on the model.

6.3. Dual Connection

The headphones support simultaneous connection to two devices:

  1. Pair the headphones with the first device as described above.
  2. Disable Bluetooth on the first device.
  3. Pair the headphones with the second device.
  4. Re-enable Bluetooth on the first device. The headphones should automatically connect to both devices.
  5. Audio will play from the device that is actively playing media or receiving a call.
Image showing seamless switching between a phone call on a smartphone and gaming on a tablet with Baseus H1i headphones.
Seamless switching between two devices for gaming and phone calls.

7. Operating Instructions

7.1. Power On/Off

  • Power On: Press and hold the power button until the indicator light turns on.
  • Power Off: Press and hold the power button until the indicator light turns off.

7.2. Active Noise Cancellation (ANC)

Use the dedicated ANC button to toggle noise cancellation:

  • Slide the ANC toggle switch to activate or deactivate Active Noise Cancellation.
  • When ANC is active, the indicator will typically show an orange light. When off, it will be black.
Close-up of the Baseus H1i headphone showing the ANC toggle switch.
ANC toggle switch for activating/deactivating noise cancellation.

7.3. Spatial Audio and Low-Latency Mode

These features are controlled via the Multifunction Button as described in Section 5.

  • Spatial Audio: Single tap the Multifunction Button to toggle spatial audio.
  • Low-Latency Mode: Double tap the Multifunction Button to activate or deactivate low-latency mode, ideal for gaming.
A person wearing Baseus H1i headphones enjoying immersive spatial audio.
Experience immersive spatial audio.
A person playing a mobile game while wearing Baseus H1i headphones, highlighting ultra-low latency gaming.
Enjoy ultra-low latency gaming with DCLL technology.

7.4. Wired Audio Connection

For a Hi-Fi wired audio experience or when battery is low, use the 3.5mm audio cable:

  1. Plug one end of the 3.5mm audio cable into the headphone's audio jack.
  2. Plug the other end into your audio source's 3.5mm port.
Baseus H1i headphones connected via a 3.5mm audio cable for wired listening.
Connect for Hi-Fi wired audio.

8. Maintenance and Care

  • Keep the headphones dry. Do not expose them to extreme temperatures or humidity.
  • Clean the ear cups and headband with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Store the headphones in a safe place when not in use, preferably in a protective case, to prevent damage. The foldable design makes them compact for storage.
  • Avoid dropping or subjecting the headphones to strong impacts.
  • Charge the headphones regularly, even if not used frequently, to maintain battery health.

9. Troubleshooting

9.1. No Sound or Intermittent Connection

  • Ensure the headphones are charged and powered on.
  • Check if Bluetooth is enabled on your device and the headphones are properly paired.
  • Move the headphones closer to your device to ensure they are within the 10m wireless range.
  • Disconnect and re-pair the headphones with your device.
  • Try connecting to a different device to rule out device-specific issues.

9.2. Active Noise Cancellation Not Working

  • Ensure the ANC toggle switch is in the 'on' position (orange indicator).
  • Check for any obstructions around the microphone ports that might interfere with noise detection.

9.3. Charging Issues

  • Ensure the charging cable is securely connected to both the headphones and the power source.
  • Try using a different Type-C charging cable and power adapter.
  • Verify the power source is functional.

9.4. Poor Call Quality

  • Ensure the microphone is not obstructed.
  • Check your device's call settings to ensure the headphones are selected as the audio output/input.
  • Move to a quieter environment if there is excessive background noise.

10. Warranty and Support

Baseus products are designed with quality and reliability in mind. For specific warranty information, please refer to the warranty card included in your package or contact your retailer.

  • Free Returns: Enjoy free returns within 90 days of purchase.
  • Fast Delivery Guarantee: Collect a $1.00 coupon for late delivery. Refunds are available if the package is lost or items are damaged, or if there is no delivery within 30 days.
  • Security & Privacy: Your personal details are protected and not shared with third parties without consent.

For further assistance, please visit the official Baseus website or contact their customer support.

Certifications for Baseus H1i headphones including CE, FCC, RoHS, and others.
Product certifications for quality and safety.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.