1. Introduction
The XSDTS Tuya Biometric Fingerprint Smart Door Lock offers advanced security and convenience for your home or bedroom. This keyless entry system provides multiple unlocking methods, including fingerprint, password, mobile app, and traditional mechanical keys. It's designed for easy installation on standard doors without the need for complex wiring or drilling.

Figure 1: XSDTS Tuya Smart Door Lock with app integration.

Figure 2: Key features of the Smart Lock including fingerprint, password, and app unlock.
2. Specifications
| Feature | Description |
|---|---|
| Brand Name | XSDTS |
| Model Number | FT001 (XSDTS Model: F2) |
| Power Supply | DRY BATTERY (4x AAA batteries) |
| Working Voltage | 4pcs AAA battery. |
| Protection Level | No Waterproof |
| Suitable for Mortise | 5050 |
| Fit Door Thickness | 40-70mm (35-55mm mentioned in mobile JSON) |
| Suitable Door Type | Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Other (Wooden, stainless steel, bronze, Double, Old-fashioned security doors) |
| Special Features | Support Gateway, Support USB charge, English Voice and menu |
| Finish Type | Other |
| Doorknob Function | Key & Keypad |
| Connectivity | Bluetooth (Tuya Bluetooth APP) |
| Ways To Unlock | App, Bluetooth, Mechanical Keys, Card, Other, Password, FINGERPRINT |
| Material | Aluminium Alloy |
| Handle Direction | Direction Reversible (Left Open and Right Open All compatible) |
| Fingerprint Type | Semiconductor |
| Recognition Speed | 0.3 seconds |
| Fingerprint Capacity | 50 fingerprints |
| Password Capacity | 100 sets of passwords |
| Operating Temperature | -20°C to 50°C |
| Product Dimensions | Handle Length: 164mm (6.45 inches), Width: 28mm (1.1 inches) |

Figure 3: Detailed product dimensions and information.
3. Package Contents
The package typically includes the following components:
- Front Lock Panel
- Rear Lock Panel
- Lock Body (Mortise)
- Square Bar
- Mechanical Keys (2 included)
- Shell Gasket
- Spiral Tube Screws
- Data Cable (Type-C)
- Buckle Accessories
- Pulling Screws
- Screwdriver
- User Manual (English language instructions)

Figure 4: All components included in the package.
4. Installation Guide
Follow these steps for proper installation of your XSDTS Smart Door Lock. An installation video is also provided for visual guidance.
Video 1: Smart Lock Installation Tutorial. This video demonstrates the complete installation process from unboxing to final testing.
4.1 Preparing the Lock Body
- Check Lock Body Alignment: Before installation, ensure the square rod hole of the lock body is in the middle of the door hole. If not, it needs to be adjusted.
- Adjusting Lock Body: Grasp the square rod holes on both sides of the lock body with your fingers and pull them back. This allows the square rod hole to switch between 60mm and 70mm. Push inward to switch from 70mm to 60mm.
- Install Lock Body: Insert the lock body into the door and tighten the screw.

Figure 5: Adjusting the lock body for left or right-handed doors.

Figure 6: Guide for selecting the correct mortise lock size based on your door.
4.2 Installing the Lock Panels
- Prepare Front Lock Panel: Install the front lock bolt. Install the front lock sleeve and tighten it with pliers.
- Thread Wires: Thread the data cable through the square rod. Align it with the square gold casting inside the hole, and insert the square rod to the bottom.
- Install Front Lock: Thread the wire from the front lock through the lock body's square rod hole. Pass the square rod through the lock body's square rod hole.
- Install Rear Lock: Thread the wire through the rear lock and install the rear lock.
- Secure Panels: Adjust the front and rear panels to ensure they are flush. Tighten the screws to secure the panels.

Figure 7: Installation step diagram.
4.3 Powering the Lock
- Open Battery Compartment: Unscrew the rear lock battery cover screw and open the rear lock battery box cover.
- Connect Power Cord: Connect the front panel power cord to the rear panel.
- Install Batteries: Insert 4 AAA batteries into the battery compartment, ensuring correct polarity.
- Close Rear Lock: Insert the power cord inside and fasten the rear lock cover. Tighten the screw.

Figure 8: Battery installation and emergency charging port.
5. Operating Instructions
5.1 Unlocking Methods
The XSDTS Smart Door Lock offers multiple convenient ways to unlock:
- Fingerprint Unlock: Place your registered fingerprint on the sensor. The lock will recognize it in 0.3 seconds and unlock.
- Password Unlock: Enter your programmed password on the keypad.
- App Unlock: Use the Tuya Bluetooth APP on your smartphone to unlock the door remotely (Bluetooth version) or from anywhere (WiFi Gateway version).
- Mechanical Key Unlock: In case of emergency or battery depletion, use the provided mechanical keys.
- IC Card Unlock: (If applicable to your model) Swipe a registered IC card to unlock.

Figure 9: Overview of available unlocking methods.

Figure 10: Smart LED indicator and fast semiconductor fingerprint sensor.
5.2 Advanced Features
- Virtual Password: Enter any random numbers before and after your correct password. The lock will only recognize the correct sequence in the middle, enhancing security.
- Pass Mode: Enable pass mode to unlock without a password, suitable for specific scenarios. To enable/disable, press and hold the button for 1 second.
- Temporary Password Sharing: Generate one-time or time-limited temporary passwords via the mobile app to share with guests or service providers.
- Tuya Gateway (WiFi Version): For the WiFi Gateway version, a gateway is required to connect the lock to your network, allowing you to control it from anywhere.

Figure 11: Virtual password and temporary password sharing features.
6. Maintenance
- Battery Replacement: The lock requires 4 AAA batteries. When the battery is low, the lock will provide a reminder. Replace all four batteries simultaneously for optimal performance.
- Emergency Charging: If the batteries completely drain, you can use a Type-C USB cable to connect to the emergency charging port on the lock for temporary power to unlock.
- Cleaning: Use a soft, dry cloth to clean the lock's surface. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Fingerprint Sensor Care: Keep the fingerprint sensor clean and dry for accurate recognition.
7. Troubleshooting
- Lock Not Responding:
- Check battery level. Replace batteries if low.
- Ensure the power cord connection inside the lock is secure.
- Fingerprint Not Recognized:
- Ensure your finger is clean and dry.
- Try different angles or re-register your fingerprint if issues persist.
- Clean the fingerprint sensor surface.
- Password Not Working:
- Ensure you are entering the correct password.
- If using virtual password, ensure the correct sequence is embedded.
- Security Alarm Triggered:
- The alarm triggers if an incorrect password is entered multiple times or if the smart lock is damaged.
- Verify the password or inspect the lock for physical damage.
- App Connectivity Issues:
- Ensure Bluetooth is enabled on your phone and the lock is within range (for Bluetooth version).
- For WiFi Gateway version, ensure the gateway is properly set up and connected to the internet.
- Restart the app and/or the lock.
8. Warranty and Support
Your XSDTS Smart Door Lock is backed by AliExpress's buyer protection policies. This includes:
- Free Returns: Enjoy free returns within 90 days of delivery.
- Fast Delivery Guarantee: Collect a $1.00 coupon for late delivery. Refunds are available if the package is lost, items are damaged, or if there's no delivery within 60 days.
- Security & Privacy: Your personal details are kept safe and are not shared with third parties without your consent.
For further assistance, please contact the seller, XSDTS official Store, directly through the AliExpress platform. They can provide specific support related to your product.