1. Introduction
The FLYSKY FS-SM001 is a versatile flight simulator remote control designed to enhance your RC flying skills. It supports a wide range of simulation software and various model types, including helicopters, fixed-wing aircraft, gliders, and drones. Available in 6-channel and 8-channel versions, it features adjustable self-centering joysticks and supports left and right-hand throttle switching, providing a realistic and customizable training experience.

2. Package Contents
Upon opening the package, ensure all items are present:
- 1x FS-SM001 Simulator Remote Control (6CH or 8CH version, as selected)
- 1x USB Cable (attached to the remote control)
- 1x Instruction Manual

3. Setup Instructions
3.1 Connecting to Your Computer
- Locate the USB cable attached to the FS-SM001 simulator.
- Plug the USB connector into an available USB port on your desktop or laptop computer.
- The simulator is powered directly through the USB cable (4~5.5V/DC).
- Your computer should automatically detect the device.
3.2 Software Installation
The FS-SM001 does not come with a physical software CD. You will need to download compatible simulation software from the internet. Some software may require purchase or a separate download.
Compatible Simulation Software includes:
- APD
- Aerofly
- Reflex XTR 5.0
- G3/G3.5/G4/G5/G6/G7
- PhoenixRC 2.0/3.0S/4.0M/5
- FMS
- And others
Suggested download links (note: some software may require purchase):
- Phoenix: http://www.fw450.com/simulator-tutorial/
- Reflex XTR: https://www.reflex-sim.net/download
- Aerofly: https://www.aerofly.com/
Once the software is installed, follow the software's instructions to configure the FS-SM001 as your controller.
4. Operating Instructions
4.1 Basic Controls
The FS-SM001 features a classic joystick assembly with multiple multi-position switches, trim buttons, and knob controls to simulate various flight functions. Familiarize yourself with the layout:

4.2 Throttle Switching
The simulator supports both left-hand and right-hand throttle configurations. This allows users to switch the throttle stick's function to their preferred hand. Refer to the diagram below for visual guidance on how to adjust the physical sticks for throttle switching. This typically involves adjusting a screw or mechanism on the back of the controller to change the stick's centering behavior.

4.3 Stick Calibration
For optimal performance, it is recommended to calibrate the sticks within your chosen simulation software. This ensures accurate input registration. The FS-SM001 supports stick calibration.
4.4 Supported Models
The simulator is compatible with a variety of RC model types, allowing you to practice different flying disciplines:
- Helicopters
- Fixed-wing aircraft
- Gliders
- 3D special aircraft
- Racing drones

5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the simulator. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the simulator in a dry place, away from direct sunlight and extreme temperatures.
- Environmental Conditions: Operate and store the device within the specified temperature range of -10℃ to +60℃ and humidity range of 20% to 95%.
- Cable Care: Do not pull on the USB cable excessively or bend it sharply to prevent damage.
6. Troubleshooting
6.1 Simulator Not Detected by Computer
- Ensure the USB cable is securely connected to both the simulator and the computer.
- Try a different USB port on your computer.
- Restart your computer and try connecting again.
- Verify that your operating system (XP, WIN7, WIN8, WIN10 32-bit and 64-bit OS are supported) is compatible.
6.2 Controls Not Responding in Software
- Ensure the correct simulator model (FS-SM001) is selected within your simulation software's controller settings.
- Perform a stick calibration within the simulation software.
- Check if the software requires specific drivers; although typically plug-and-play, some older software might.
- Confirm that the simulation software itself is running correctly and is not frozen.
6.3 Incorrect Throttle Behavior
- If the throttle is not behaving as expected (e.g., not self-centering when it should, or vice-versa), check the physical throttle switching mechanism on the back of the simulator. Adjust it to your desired left-hand or right-hand throttle mode.
- Recalibrate the sticks after any physical adjustments.
7. Specifications
| Feature | Description |
|---|---|
| Product Model | SM001 |
| Number of Channels | 6 (8) |
| Compatible OS | XP, WIN7, WIN8, WIN10 (32-bit and 64-bit) |
| Input Power | 4~5.5V/DC (USB powered) |
| Working Current | 26mA/5V |
| Data Output | USB |
| Dimensions | 166.8mm * 132.7mm * 66.3mm |
| Weight | About 250g |
| USB Cable Length | 1.2m |
| Gimbals Assembly Swapping | Yes |
| Trim Adjustment | Yes |
| Stick Calibration | Yes |
| Online Update | No |
| Temperature Range | -10℃ ~ +60℃ |
| Humidity Range | 20% ~ 95% |

8. User Tips
- Start Simple: If you're new to RC flight, begin with simpler models and basic maneuvers in your simulator software before attempting complex tricks.
- Regular Practice: Consistent practice is key to improving your skills. Even short daily sessions can make a big difference.
- Explore Software Features: Most simulation software offers various settings, environments, and challenges. Experiment with these to diversify your training.
- Check for Updates: While the simulator hardware does not support online updates, ensure your simulation software is always up-to-date for the best experience and compatibility.
- Comfort is Key: Adjust your seating and monitor position for comfort during long practice sessions.
9. Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.