1. Introduction
The Lekato AT-07 is a versatile chromatic tuner pedal designed for guitar, bass, violin, and ukulele. It features fast and accurate tuning, a bright full-color display, and true bypass functionality to preserve your instrument's tone. Its compact design makes it a convenient addition to any pedalboard, suitable for various musical settings from home practice to stage performances.
2. Safety & Warnings
Please read all instructions carefully before using this product to ensure safety and prevent damage.
General Warnings:
- Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
- Disassembly/Repair: Do not disassemble or repair this product yourself. Refer all servicing to qualified service personnel.
- Environment: Do not use or store the product near heat sources, in damp or dusty areas. Avoid violent vibrations or shock.
- Dropping: Do not drop this product, as it may malfunction.
- Cleaning: Clean only with a dry cloth. Do not use alcohol or other cleaning fluids.
- Ventilation: Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
- Power Cord: Protect the power cord from being walked on or pinched, especially at plugs, convenience receptacles, and where it exits the apparatus.
- Accessories: Use only attachments/accessories specified by the manufacturer.
- Stability: Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Use caution when moving a cart/apparatus combination to avoid injury from tip-over.
- Unplugging: Unplug this apparatus during lightning storms or when unused for long periods.
- Power Polarity: Please use a power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.
CE Declaration of Conformity:
This product conforms with all applicable European Union regulations. The 'Conformité Européenne' (CE) marking confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.
3. Product Features
- Built To Last: Rugged construction with premium components for long-term durability.
- Bypass Mode: True bypass design preserves original tone when the effect is off.
- Small & Accurate: Compact chassis with precision-engineered controls.
- Fast & Accurate Tuning Note Detection: Supports 430Hz-450Hz pitch range and 4 steps half flat options (b, bb, bbb, bbbb) with a ±0.5 Cent tuning tolerance.
- Ultra Bright Full Color Display: Provides a clear color display to intuitively adjust your intonation.
- Small and Convenient Design: Easily integrates into any pedalboard setup.
- Suitable For Multiple Occasions: Ideal for use at home, parties, on stage, or outdoors.
4. Setup
- Power Connection: Connect a DC 9V power adapter (not included) to the pedal. Ensure the power adapter has a central negative polarity (positive pole outside, negative pole inside) to prevent damage.
- Instrument Connection: Link your instrument (guitar, bass, violin, ukulele) to the 'IN' jack of the pedal using a standard instrument cable.
- Output Connection: Connect the 'OUT' jack of the pedal to your amplifier or next effect pedal in the signal chain.
5. Operation
- Turn On: Press the ON/OFF footswitch button to activate the tuner. The display will light up.
- Adjust Pitch (A4): If you wish to change the reference pitch, press the 'A4' button. The pitch ranges from 430Hz to 450Hz.
- Adjust Flat Options: If you need to tune with flat notes, press the 'FLAT' button. This offers 4 steps: b, bb, bbb, bbbb.
- Tune Your Instrument: Play a single note on your instrument. The note name will appear on the tuner screen. The screen color and tuning needle will indicate the tuning status.
- Tuning Indicators:
- In Tune: The center blue tuning meter appears, and two blue triangles appear on either side of the note name.
- Flat Note: The left red tuning meters appear, and a blue triangle appears on the left side of the note name.
- Sharp Note: The right yellow tuning meters appear, and a blue triangle appears on the right side of the note name.
- Bypass Function: Once tuning is complete, press the ON/OFF footswitch button again. The tuner will enter bypass mode, allowing your instrument's signal to pass through without any distortion or coloration.
6. Maintenance
- Cleaning: Use only a dry, soft cloth to clean the pedal. Avoid using alcohol or other cleaning fluids.
- Storage: Store the pedal in a dry, dust-free environment away from direct sunlight and extreme temperatures.
- Handling: Handle the pedal with care to avoid dropping or subjecting it to violent vibrations.
- Power Off: Always turn off the pedal when not in use to conserve power and prolong its lifespan.
7. Troubleshooting
- No Power/Flickering Indicator: If the power indicator is flickering or the unit does not power on, check the DC 9V power adapter connection and ensure it meets the specified polarity (central negative). If using a battery, replace it if low.
- Signal Issues: If the signal is distorted or weak, ensure all cables are securely connected and in good condition. Obstructions or poor cable quality between the instrument and the pedal can affect signal integrity.
- Tuner Not Responding: Ensure the pedal is in tuner mode (not bypass). Recheck instrument connection.
- Damaged Unit: If the apparatus has been damaged (e.g., power cord/plug damaged, liquid spilled, dropped, exposed to rain/moisture), do not attempt to repair it yourself. Refer all servicing to qualified service personnel.
- Incorrect Outlet Fit: If the power plug does not fit your outlet, consult a qualified electrician for replacement of the obsolete outlet.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | LEKATO AT-07 Tuner Pitch Guitar Effect Pedal |
| Type | Tuner |
| Brand Name | LEKATO |
| Origin | Mainland China |
| Material | Alloy |
| Batteries Included | No |
| Plug Type | NONE (for power adapter, not instrument jack) |
| Weight | 300g |
| Package Length | 12 cm |
| Package Width | 6 cm |
| Package Height | 7 cm |
| Package Weight | 0.238 kg |
| Tuning Range | 430Hz - 450Hz |
| Flat Options | b, bb, bbb, bbbb (4 steps) |
| Tuning Tolerance | ±0.5 Cent |
| Power Supply | DC 9V (Central Negative) |
9. User Tips
- Always ensure the correct power adapter (DC 9V, central negative) is used to prevent damage to the pedal.
- For optimal signal integrity, use high-quality instrument cables.
- When not actively tuning, engage the bypass mode to ensure your instrument's tone remains unaffected.
- Consider adding the pedal to a dedicated pedalboard for stability and ease of use during performances.
10. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. It is recommended to keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format is available for download: Lekato AT-07 User Manual (PDF)
11. Environmental Disposal
This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
