LEKATO MS-1G

Contents

LEKATO MS-1G 2.4GHz Wireless In-Ear Monitor System

User Manual

1. Introduction

The LEKATO MS-1G is a 2.4GHz wireless in-ear monitor (IEM) system designed for musicians, performers, and studio professionals. It provides high-quality, low-latency audio monitoring, allowing for freedom of movement on stage or in the studio. The system features lossless digital transmission, automatic pairing, and the flexibility to switch between mono and stereo modes.

2. Safety Information

  • Do not expose the device to rain, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the units to strong impacts.
  • Do not attempt to disassemble or modify the units. Refer all servicing to qualified personnel.
  • Use only the provided USB cables for charging to prevent damage.
  • Keep the units away from strong electromagnetic fields to avoid interference.
  • Prolonged listening at high volumes can cause hearing damage. Adjust volume to a comfortable level.

3. Package Contents

Verify that all items are present in your package:

  • 1 x LEKATO MS-1G Transmitter
  • 1 x LEKATO MS-1G Receiver
  • 2 x USB Charging Cables
  • 2 x 3.5mm Audio Cables
  • 1 x 6.35mm Adapter (for Transmitter input)
  • 1 x User Manual (this document)
Green LEKATO MS-1G Transmitter and Receiver with included accessories

Figure 1: Green LEKATO MS-1G Transmitter and Receiver with included accessories.

Black LEKATO MS-1G Transmitter and Receiver with included accessories

Figure 2: Black LEKATO MS-1G Transmitter and Receiver with included accessories.

4. Product Overview

Familiarize yourself with the components of the Transmitter and Receiver units:

Diagram of green LEKATO MS-1G Transmitter and Receiver with labeled components

Figure 3: Green LEKATO MS-1G Transmitter and Receiver labeled components.

Diagram of black LEKATO MS-1G Transmitter and Receiver with labeled components

Figure 4: Black LEKATO MS-1G Transmitter and Receiver labeled components.

Transmitter Components:

  1. OFF/ON Switch: Powers the unit on or off.
  2. Power Indicator: Shows power status.
  3. Charging Port: USB-C port for charging.
  4. Mobile Phone/Musical Instrument Input: 3.5mm input jack for audio source.
  5. Mono/Stereo Switch: Toggles between mono and stereo audio transmission.
  6. Channel Indicator: Displays the current operating channel.
  7. Battery Indicator Light: Shows battery charge level.
  8. Pairing Indicator: Indicates pairing status.

Receiver Components:

  1. OFF/ON Switch: Powers the unit on or off.
  2. Power Indicator: Shows power status.
  3. Charging Port: USB-C port for charging.
  4. Headphone/Speaker Output: 3.5mm output jack for headphones or speakers.
  5. Mono/Stereo Switch: Toggles between mono and stereo audio reception.
  6. Channel Indicator: Displays the current operating channel.
  7. Battery Indicator Light: Shows battery charge level.
  8. Pairing Indicator: Indicates pairing status.
  9. Volume Down Button: Decreases output volume.
  10. Volume Up Button: Increases output volume.

5. Setup

5.1 Initial Charging

Before first use, fully charge both the Transmitter and Receiver units. Connect the provided USB charging cables to the charging ports (3) on each unit and to a standard USB power adapter (not included). The Battery Indicator Light (7) will show charging status and turn off or change color when fully charged.

5.2 Connecting the Transmitter

  1. Connect one end of the 3.5mm audio cable to the Mobile Phone/Musical Instrument Input (4) on the Transmitter.
  2. Connect the other end of the 3.5mm audio cable to your audio source (e.g., mixer, instrument, mobile phone). Use the 6.35mm adapter if your audio source requires it.

5.3 Connecting the Receiver

  1. Connect your in-ear monitors or headphones to the Headphone/Speaker Output (4) on the Receiver.

5.4 Powering On and Pairing

  1. Turn on both the Transmitter and Receiver units using their respective OFF/ON Switches (1).
  2. The units should automatically pair. The Pairing Indicator (8) on both units will illuminate steadily when a successful connection is established.
  3. If pairing does not occur automatically, ensure both units are powered on and within range. You may need to briefly press the pairing button (if available, not explicitly labeled but implied by 'Pairing Indicator') or power cycle the units.

5.5 Mono/Stereo Selection

Use the Mono/Stereo Switch (5) on both the Transmitter and Receiver to select your desired audio mode. Ensure both units are set to the same mode (Mono or Stereo) for optimal performance.

5.6 Multi-Unit Setup

The LEKATO MS-1G system supports multiple transmitters and receivers for multi-channel monitoring. Each transmitter can broadcast on a different channel, allowing multiple performers to receive independent mixes. Multiple receivers can be paired to a single transmitter to receive the same mix.

Illustration demonstrating multiple LEKATO MS-1G Transmitters and Receivers in a multi-channel setup for a band

Figure 5: Multi-channel setup with LEKATO MS-1G system.

To set up multiple channels:

  • Ensure each Transmitter is set to a unique channel (indicated by the Channel Indicator (6)).
  • Pair the desired Receivers to their respective Transmitters.
  • For example, Transmitter 1 (Channel 1) can send audio to multiple Receivers set to Channel 1, while Transmitter 2 (Channel 2) sends audio to Receivers set to Channel 2.

6. Operating Instructions

6.1 Power On/Off

Slide the OFF/ON Switch (1) on both units to power them on or off.

6.2 Adjusting Volume

On the Receiver unit, use the Volume Up (10) and Volume Down (9) buttons to adjust the listening volume of your headphones.

6.3 Monitoring with Mobile Phone

The system supports connecting to a mobile phone for feedback. Connect your mobile phone's audio output to the Transmitter's input (4) using the appropriate audio cable. This allows you to monitor audio from your phone wirelessly.

7. Maintenance

7.1 Cleaning

  • Wipe the units with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or chemical sprays.

7.2 Battery Care

  • To prolong battery life, avoid fully discharging the units frequently.
  • Charge the units regularly, even if not in use for extended periods (e.g., once every 3 months).
  • Store in a cool, dry place.

7.3 Storage

  • When not in use, store the units in a protective case to prevent damage.
  • Keep away from direct sunlight and high humidity.

8. Troubleshooting

8.1 No Sound or Intermittent Audio

  • Check Power: Ensure both Transmitter and Receiver are powered on and charged.
  • Check Connections: Verify all audio cables are securely connected to the audio source and headphones.
  • Check Pairing: Confirm the Pairing Indicator (8) on both units is solid, indicating a successful connection. If not, power cycle both units.
  • Check Volume: Adjust the volume on the Receiver (9, 10) and your audio source.
  • Check Range: Ensure the Transmitter and Receiver are within the effective operating distance (up to 30 meters outdoor, 15 meters through walls).
  • Check Interference: Move away from other 2.4GHz wireless devices (Wi-Fi routers, other wireless systems) that might cause interference.
  • Mono/Stereo Mismatch: Ensure the Mono/Stereo switch (5) is set identically on both units.

8.2 Short Battery Life

  • Ensure units are fully charged before use.
  • Battery performance can degrade over time with repeated charge cycles.
  • Operating in very cold environments can temporarily reduce battery performance.

8.3 Pairing Failure

  • Ensure both units are fully charged and powered on.
  • Power cycle both the Transmitter and Receiver.
  • Ensure no other 2.4GHz devices are causing excessive interference during the pairing process.

9. Specifications

Graphic highlighting key performance specifications of the LEKATO MS-1G system

Figure 6: LEKATO MS-1G System Performance Specifications.

FeatureSpecification
Sampling Rate24bit/48KHz Lossless Digital Transmission
Wireless Frequency Range2.4GHz
Delay≤12ms
Effective Distance≤30 meters (outdoor) / ≤15 meters (through walls) / 90 feet
Power SupplyBuilt-in Rechargeable Lithium Battery (USB-C charging)
Transmitter Battery Capacity780mAh
Receiver Battery Capacity550mAh
Signal-to-Noise Ratio (SNR)-98dB
Dynamic Range>105dB
Frequency Response20Hz ~ 20KHz, +1dB/-3dB
Unit Dimensions (approx.)6 x 4.5 x 2 cm
MaterialComposite Materials
Batteries IncludedYes

10. User Tips

  • Headphone Compatibility: While the system is generally compatible with various headphones, consider the impedance of your headphones. High-impedance headphones (e.g., 120Ω) might require higher volume settings on the receiver or a more powerful audio source to achieve desired loudness.
  • Optimal Placement: For the best wireless performance, try to maintain a clear line of sight between the transmitter and receiver, especially in environments with many obstacles or other wireless signals.
  • Channel Management: When using multiple transmitter-receiver pairs, ensure each transmitter is on a distinct channel to prevent cross-talk and interference between different monitor mixes.
  • Battery Conservation: Turn off units when not in use to conserve battery life.
  • Studio vs. Live: The system is versatile for both studio and live applications. In a studio, you might benefit from the stereo mode for a wider soundstage, while in a live setting, mono might be preferred for clarity and to avoid phase issues.

11. Warranty and Support

LEKATO products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official LEKATO website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.