1. Introduction
The XINOWY V6 PRO is a high-performance Bluetooth intercom headset designed for motorcycle riders, offering clear communication, music playback, and GPS navigation. It supports communication for up to 6 riders and features a waterproof design for all-weather use.
Figure 1: XINOWY V6 PRO Intercom Headset
2. Package Contents
Please check the box for the following items:
- 1 or 2 x XINOWY V6 Pro Helmet Intercom Unit(s)
- 1 or 2 x Bluetooth Headset(s) (with speakers and microphone)
- 1 or 2 x Metal Clip Replacement(s)
- 1 or 2 x USB Charging Cable(s)
- 1 or 2 x Helmet Clip(s)
- 1 or 2 x Screwdriver(s)
- 1 or 2 x User Manual(s)
3. Product Overview
Familiarize yourself with the buttons and ports on your V6 PRO intercom unit:
- Intercom (Power/A) Button: Used for power on/off and initiating intercom.
- Button B, C, D, E: Used for multi-rider intercom connections.
- Phone Button: Used for phone calls (answer, hang up, redial) and music control (play/pause).
- Volume - Button: Decrease volume, long press for previous track.
- Volume + Button: Increase volume, long press for next track.
- Headphone Jack: For connecting the headset (speakers and microphone).
4. Setup
4.1 Installation
- Attach the Intercom Unit: Use the helmet clip to securely attach the V6 PRO unit to the side of your helmet.
- Connect Headset: Plug the Bluetooth headset (speakers and microphone) into the 3.5mm jack on the intercom unit.
- Position Speakers: Place the speakers inside the helmet, aligning them with your ears for optimal sound.
- Position Microphone: Position the microphone close to your mouth for clear voice transmission.
4.2 Charging
Connect the V6 PRO to a power source using the provided USB charging cable. The indicator light will show charging status. A full charge takes approximately 3 hours.
5. Operating Instructions
5.1 Power On/Off
- Power On: Short press the Intercom (Power/A) button. The indicator will flash blue.
- Power Off: Long press the Intercom (Power/A) button until the red lights appear, then release.
5.2 Bluetooth Pairing (Mobile Phone)
To pair your V6 PRO with a mobile phone:
- Ensure the V6 PRO is powered off.
- Long-press the Phone button until the indicator flashes red and blue alternately. This indicates Bluetooth pairing mode.
- On your mobile phone, go to Bluetooth settings and turn on Bluetooth.
- Search for available devices and select "V6" from the list.
- Once connected, the V6 PRO indicator will flash blue.
5.3 Music Playback
After connecting to your mobile phone via Bluetooth:
- Play/Pause: Click the Phone button.
- Volume Adjustment: Click the Volume + button to increase volume, or Volume - button to decrease volume.
- Switch Songs: Long-press the Volume + button to switch to the previous track, or long-press the Volume - button to switch to the next track.
5.4 Phone Calls
- Automatically Answer: The V6 PRO will automatically answer incoming calls within 5 seconds.
- Hang Up: Click the Phone button to end a call.
- Decline: Short-press the Phone button within 5 seconds of an incoming call to decline it.
- Redial Last Call: Long-press the Phone button for approximately 3 seconds to redial the last number.
5.5 Voice Assistant (Siri/Google Assistant)
Ensure your V6 PRO is paired with your mobile phone.
- Method 1: Double-click the Phone button to activate your phone's voice assistant.
- Method 2: Say "Hey Siri" (for iOS) or your phone's equivalent voice command into the microphone.
5.6 Intercom Pairing (Two V6 PRO Units)
To establish intercom communication between two V6 PRO units:
- Short-press the Intercom (Power/A) button on both units to power them on. The indicators will flash blue.
- Long-press the Intercom (Power/A) button on both units simultaneously until their indicators flash red and blue alternately.
- Choose one unit as the "master." Short-press the Intercom (Power/A) button on the master unit to start searching for the other unit.
- After 5-10 seconds, both devices will flash blue at the same rate, indicating successful pairing.
- To enter intercom mode, click the Intercom (Power/A) button on the master unit. You should be able to talk between the two units after about 3 seconds.
5.7 Intercom Reconnection (Two V6 PRO Units)
To reconnect two previously paired V6 PRO units:
- Boot both V6 PRO intercoms by short-pressing the Intercom (Power/A) button.
- Click the Intercom (Power/A) button on the master unit (either intercom is fine).
- After about 3 seconds, you can talk between the two V6 Pro units.
5.8 Multi-Rider Intercom (Up to 6 Riders)
The V6 PRO supports multi-person intercom for up to 6 riders, with 2 people in full duplex mode simultaneously. For detailed pairing of multiple units, refer to the pairing chart below.
6. Maintenance
- Cleaning: Wipe the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use.
- Battery Care: To prolong battery life, charge the device regularly, even if not used frequently. Avoid extreme temperatures.
- Water Resistance: The V6 PRO has an IP65 waterproof rating, protecting against dust and low-pressure water spray. However, it is not designed to be immersed in water or drenched in heavy rain.
7. Troubleshooting
- No Power: Ensure the device is fully charged.
- Cannot Pair: Make sure both devices are in pairing mode (red and blue flashing lights) and within range. Try restarting both devices.
- Intercom Disconnects: Ensure units are within the effective range (up to 1200m in open areas, typically 300-800m in general outdoor environments). Check for obstacles or interference.
- Poor Audio Quality: Check microphone and speaker connections. Ensure microphone is positioned correctly. Adjust volume levels.
- Brand Compatibility: The V6 PRO supports universal pairing with most other brands of Bluetooth intercoms.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | V6 PRO |
| Bluetooth Version | Bluetooth 5.1 |
| Max Intercom Distance | 1200m (between 2 riders) |
| Max Working Speed | Up to 120 Km/h |
| Max Number of Speakers | 6 (2-person full duplex) |
| Battery Capacity | 850 mAh Li Polymer |
| Talking Time | Up to 12 hours |
| Standby Time | 360 hours |
| Charging Time | About 3 hours |
| Waterproof Rating | IP65 |
| Special Features | Waterproof, Noise Reduction, Full Duplex Intercom, Music Player, GPS Navigation |
| Item Weight | 50g |
| Dimensions (L x W x H) | 8.4cm x 1.6cm x 4cm (approx. 3.31 x 0.63 x 1.57 inches) |
| Certification | CE |
| Applicable Helmet Type | MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet |
| Connection Mode | Wire, Bluetooth |
| Plug Type | USB |
9. User Tips
- Brand Clarification: While some images or older models might refer to 'EJEAS', the product is the XINOWY V6 PRO. It is designed to be compatible with many other brands.
- Intercom Capacity: The V6 PRO can connect up to 6 riders, but only 2 riders can engage in full-duplex (simultaneous two-way) communication at any given time.
- Package Options: The V6 PRO is available in single or double pack options. Ensure you select the correct package based on your needs.
- Microphone Type: The device comes with a boom microphone suitable for various helmet types.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.
