AODELAN PEBBLE Wireless Camera Shutter Release Remote Control User Manual

1. Introduction

The AODELAN PEBBLE Wireless Shutter Remote Control is designed to provide photographers with a convenient and stable way to trigger their cameras remotely. It consists of a transmitter and a receiver, utilizing 2.4GHz radio technology for a reliable connection up to approximately 80 meters (262 feet). This remote helps to reduce camera shake, ensuring sharper images, and supports various shooting modes including single shot, continuous shooting, 2-second delayed shooting, and bulb shooting.

The receiver can also function as a wired shutter remote, offering flexibility in different shooting scenarios. Its unique pebble design makes it both aesthetically pleasing and practical for use.

Image: Comparison illustrating how using the remote control reduces camera shake for sharper photos.

2. Package Contents

• 1 x Transmitter (with built-in CR2032 battery)
• 1 x Receiver (batteries not included)
• 1 x Shutter Release Cable (specific to your camera model)
• 2 x Lanyards

Image: Contents of the AODELAN PEBBLE Wireless Shutter Release package, including transmitter, receiver, shutter release cable, and lanyards.

Image: The accessories included: two lanyards and the shutter release cable.

3. Part Names and Functions

Image: Detailed diagram illustrating the different parts of the AODELAN PEBBLE Transmitter and Receiver.

Transmitter:

• LED Indicator: Shows operational status.
• Shutter Button: Triggers autofocus (half-press) and takes a photo (full-press).
• Power Button: Turns the transmitter on/off.

Receiver:

• Delay Button: Activates 2-second delayed shooting.
• Shutter Button: Triggers autofocus (half-press) and takes a photo (full-press).
• LED Indicator: Shows operational status.
• Remote Release Terminal: Connects to the camera via the shutter release cable.
• Cold Shoe/Tripod Lug & 1/4"-20: For mounting on a camera's hot shoe or a tripod.

4. Setup and Installation

4.1 Battery Installation

• Transmitter: The transmitter comes with a built-in CR2032 button battery. If replacement is needed, open the battery compartment and insert one CR2032 battery with the correct polarity.
• Receiver: Open the battery compartment on the receiver and insert two AAA batteries, ensuring correct polarity. Batteries are not included in the package.

Image: Diagram showing the battery types and compartments for the AODELAN PEBBLE Transmitter (CR2032) and Receiver (AAA).

4.2 Connecting the Receiver to Your Camera

1. Attach the receiver to your camera's hot shoe. The receiver features a cold shoe mount for secure attachment.
2. Connect one end of the provided shutter release cable to the remote release terminal on the receiver.
3. Connect the other end of the shutter release cable to your camera's remote control port.

Note: If you need to use a flash on your camera's hot shoe, you can remove the receiver from the hot shoe while keeping it connected via the shutter release cable. The receiver can also be mounted on a tripod using its 1/4"-20 thread.

Image: The AODELAN PEBBLE Receiver connected to a camera's hot shoe and remote port via the shutter release cable.

4.3 Powering On and Pairing

• Ensure both the transmitter and receiver have fresh batteries installed.
• Turn on the receiver before use.
• The system uses 2.4GHz radio technology for automatic pairing. For advanced users, the receiver can be controlled by up to 100 transmitters by setting a smart code (consult advanced documentation or support for smart code setup).

5. Operating Instructions

The AODELAN PEBBLE remote offers various shooting modes to enhance your photography experience.

5.1 Single Shooting

• Set your camera to Single Shooting mode.
• Half-press the shutter button on the transmitter to autofocus.
• Fully press the shutter button on the transmitter to take a photo.

5.2 Continuous Shooting

• Set your camera to Continuous Shot mode.
• Press and hold the shutter button on the transmitter until its LED indicator turns off.
• Release the button. The camera will now perform continuous shooting.
• To stop continuous shooting, press the shutter button on the transmitter again.

Image: Visual guide for continuous shooting using the remote, showing a sequence of action shots.

5.3 2-Second Delayed Shooting

• Set your camera to Single Shooting mode.
• Press the dedicated 2s delay button on the transmitter to trigger the camera after a 2-second delay.

Image: Example of using the 2-second delay shooting feature for self-portraits or group photos.

5.4 Bulb Shooting

• Set your camera to BULB mode.
• Press and hold the shutter button on the transmitter for the desired exposure duration.
• Release the button to end the exposure.

Image: Visual guide for bulb shooting, demonstrating its use for long exposure photography.

5.5 Wired Shutter Release Function

The receiver can also be used independently as a wired shutter release. Simply connect the receiver to your camera via the shutter release cable. The receiver's shutter button will then function for single shooting, continuous shooting, and bulb shooting, similar to the transmitter.

Image: The receiver connected directly to the camera for wired shutter release functionality.

6. Specifications

Image: Detailed table of technical specifications for the AODELAN PEBBLE Transmitter and Receiver.

7. Compatibility

The AODELAN PEBBLE Wireless Shutter Release Remote Control is designed to be compatible with a wide range of camera models. Please ensure you select the correct shutter release cable for your specific camera model.

Compatible Brands include: Sony, Nikon, Canon, Pentax, Minolta, Fujifilm, Panasonic, Olympus.

Specifically compatible with Fujifilm models: X-H2, X-H2S, X-H1, GFX 50S II, GFX 50S, GFX 50R, GFX 100S II, GFX 100S, GFX100, X-T5, X-T4, X-T3, X-T2, X-T1, X-T100, X-T30 II, X-T30, X-T20, X-A7, X-A5, X-E2, X-E1, X100V, X100VI, X30, XF10, X-Pro3.

Image: Visual representation of the remote's compatibility with major camera brands.

8. Troubleshooting

• Remote not triggering camera:
  • Ensure both transmitter and receiver are powered on.
  • Check battery levels in both units and replace if necessary.
  • Verify the shutter release cable is securely connected to both the receiver and the camera.
  • Confirm your camera is set to the appropriate shooting mode (e.g., Single, Continuous, Bulb).
  • Ensure the camera's remote control function is enabled in its settings, if applicable.
  • Check that the remote is within the operating distance (approx. 80m/262ft).
• Intermittent connection:
  • Move closer to the camera to rule out range issues.
  • Avoid obstacles that might block the 2.4GHz signal.
  • Check for potential interference from other 2.4GHz devices.
• Delay button not working:
  • Ensure the camera is in Single Shooting mode for the 2-second delay function.

9. User Tips

• Always turn on the receiver before attempting to use the remote control.
• For optimal performance and compatibility, ensure you have selected the correct shutter release cable for your specific camera model.
• The wireless remote is excellent for reducing camera shake, which is crucial for sharp images, especially in low light or with long lenses.
• Consider using the 2-second delay function for self-portraits or group shots where you want to be in the picture without rushing.
• For advanced setups, the receiver can be controlled by up to 100 transmitters, allowing for complex multi-camera triggering (consult advanced documentation or support for smart code setup).

10. Warranty and Support

For any questions, technical support, or warranty inquiries regarding your AODELAN PEBBLE Wireless Camera Shutter Release Remote Control, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.