1. Introduction
The LEKATO WP-5G Wireless Audio Transmission System is designed for electronic instruments, providing a reliable and high-quality wireless connection. This system features low noise, low latency, high resolution, and long transmission range, allowing musicians to enjoy a cable-free performance experience.
For a complete reference, please consult the official user manual PDF: LEKATO User Manual (PDF)
2. Safety & Warnings
General Safety Advisory
This product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed. Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.
Essential Precautions
- Read and keep all instructions.
- Heed and follow all warnings and instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Specific Cautions
- Do not disassemble or repair this product by yourself.
- Do not use or store it in heat sources, damp, or dusty areas. Avoid violent vibrations or shock.
- Do not drop this product, otherwise it may malfunction.
- Do not use alcohol or other cleaning fluids to clean this product.
- Please make sure the transmitter and the receiver keep a distance away from wireless routers or other wireless equipment during use to minimize interference.
- Obstructions between the transmitter and the receiver may affect the transmission distance.
- A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously without interference.
- If only one power indicator is flickering during use, indicating low battery, the transmission distance and quality will be affected. Please charge it in time.
- Please turn off the transmitter and the receiver when not in use.
- Due to the characteristics of lithium batteries, there is a slight self-discharge. Please charge the battery every 2 months to avoid low battery protection.
- The lithium battery capacity decreases gradually after repeated charge and discharge, affecting the product's lifetime within an acceptable degree.
CE Conformity
This product conforms with all applicable European Union regulations. The CE marking confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
3. Product Overview
Features
- Low Latency: Latency time as low as 5.6ms for smooth performance.
- Long Transmission Range: Effective distance up to 30 meters (98.4ft) outdoors or 15 meters (49.2ft) through walls.
- 5.8GHz Wireless Band: Utilizes the 5.8G wireless transmission band (ISM Band) to avoid clogged 2.4G/UHF bands, ensuring low interference.
- High-Resolution Sound: 24bit/48KHz sample rate delivers high-quality, lossless professional sound.
- Multi-Channel Support: Supports up to 4 sets of devices working simultaneously with one-to-one connection and no interference. One-key channel changing for convenience.
- Rotatable Plug Design: Features a 190° rotatable 1/4'' plug, making it widely compatible with various audio equipment with 6.35mm jacks.
- Rechargeable Battery: Built-in 1100mAh battery provides over 8 hours of continuous use time. Supports 1.5 hours fast charging.
Package Contents
- 1 x LEKATO Wireless Transmitter
- 1 x LEKATO Wireless Receiver
- 1 x USB Charging Cable (1 in 2 out, supports fast charging)
- 1 x Storage Bag
- 1 x User Manual (English and Chinese)
4. Setup
The LEKATO WP-5G system is designed for "Plug and Play" operation with automatic channel setup, making it easy to go cable-free.
- Charge the Units: Before first use, ensure both the transmitter and receiver units are fully charged. Connect the included 1-in-2-out USB charging cable to both units and a suitable USB power source. The units support fast charging and will be fully charged in approximately 1.5 hours.
- Power On: Locate the ON/OFF switch on the side of both the transmitter and receiver units. Slide the switch to the "ON" position for both devices.
- Connect Transmitter: Plug the transmitter unit into your instrument's 1/4" output jack (e.g., electric guitar, bass, keyboard). The 190° rotatable plug allows for flexible positioning.
- Connect Receiver: Plug the receiver unit into your amplifier's 1/4" input jack, audio mixer, or other audio equipment.
- Automatic Pairing: The units will automatically establish a connection. The indicator lights on both units will show their status.
- Channel Selection (if needed): If you experience interference or are using multiple sets, press the "CHANNEL" button on the side of the units to cycle through the 4 available channels. Ensure both the transmitter and receiver are on the same channel for optimal performance.

Figure 1: LEKATO Wireless Guitar System Transmitter and Receiver units.

Figure 2: Side view showing ON/OFF switch and Channel button.

Figure 3: Charging the transmitter and receiver units.

Figure 4: 190° rotatable plug design and instrument compatibility.
5. Operating Instructions
- Power On/Off: Use the ON/OFF switch on each unit to power them on or off. Always turn off the units when not in use to conserve battery life.
- Connect to Instruments/Amps: Plug the transmitter into your instrument's 1/4" output and the receiver into your amplifier's 1/4" input. The rotatable plug ensures a secure and convenient fit.
- Select Channel: The system supports 4 channels. If you encounter interference or are using multiple wireless systems, press the "CHANNEL" button on both the transmitter and receiver to switch to a different channel. Ensure both units are set to the same channel.
- Monitor Battery Status: The indicator lights on the units will show the battery status. If a power indicator is flickering, it signifies a low battery and reduced transmission quality. Charge the units promptly.
- Performance: Enjoy low-latency, high-resolution wireless audio transmission for your instrument. The system provides a stable connection up to 30 meters outdoors.

Figure 5: LEKATO Wireless Guitar System in use.

Figure 6: Transmission range and latency details.

Figure 7: Multi-channel operation for multiple systems.
6. Maintenance
- Cleaning: Clean the units only with a dry cloth. Do not use alcohol or other cleaning fluids, as they may damage the product.
- Battery Care: To prolong the life of the built-in lithium battery, charge it every 2 months, even if not in use, to prevent deep discharge and low battery protection issues.
- Storage: Turn off both the transmitter and receiver when not in use. Store them in a cool, dry place, away from heat sources, dampness, and dust. Avoid violent vibrations or shock.
- Avoid Damage: Do not drop the product. Handle with care to prevent malfunctions.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal. |
|
|
| Poor sound quality (noise, distortion). |
|
|
| Unit does not power on. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model | WS-90 (WP-5G) |
| Sample Rate | 24bit/48KHz uncompressed professional sound quality |
| Wireless Band | 5.8G ISM Band |
| Latency | 5.6ms |
| Range | 30m / 98.4ft (outdoor), 15m / 49.2ft (wall distance) |
| THD + Noise | -98dB |
| Dynamic Range | > 105dB A weighted |
| Frequency Range | 20 ~ 20KHz, 1dB/-3dB |
| Channels | 4 sets of devices work at the same time |
| Battery Capacity | 3.7V 1100mAh (Built-in rechargeable lithium battery) |
| Playing Time | 8 hours (continuous use) |
| Charging Time | Approx. 1.5 hours (fast charging support) |
| Charging Device | 1 in 2 out USB charging cable |
| Item Size (unfolding, main body) | 90 * 43 * 14mm / 3.54 * 1.69 * 0.55in |
| Item Weight (one unit) | 51g / 1.80oz |
| Package Weight | 236g / 8.32oz |
| Package Size | 15.3 * 12 * 4.5cm / 6.02 * 4.72 * 1.77in |
| Material | PVC |
| Batteries Included | Yes |
9. User Tips
- Active Pickups: The system is compatible with electric basses and guitars, including those with active pickups.
- Optimal Placement: For best performance, try to maintain a clear line of sight between the transmitter and receiver. Avoid placing them directly behind large metal objects or near other strong wireless signals.
- Channel Management: If you experience any signal drops or interference, try switching to a different channel using the "CHANNEL" button on both units.
- Battery Reminder: Always charge both units before a performance or extended practice session to ensure uninterrupted use.
10. Warranty & Support
For detailed warranty information, service, and support, please refer to the official user manual PDF provided with your product or contact LEKATO customer service.
Official User Manual (PDF): LEKATO User Manual (PDF)