QCY T13

Contents

QCY T13 Bluetooth 5.1 Wireless TWS Earbuds User Manual

Model: T13 | Brand: QCY

1. Introduction

Thank you for choosing the QCY T13 Bluetooth 5.1 Wireless TWS Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features such as Environmental Noise Cancellation (ENC) for clear calls, long battery life, and customizable controls via the QCY App. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

For a better user experience, it is recommended to download the QCY mobile application.

QCY T13 White Earbuds and Charging Case

QCY T13 Wireless Earbuds in white with charging case.

2. What's in the Box

Please check the package contents to ensure all items are present:

  • Earbuds (L/R) and Charging Case x 1
  • Eartips x 3 pairs (S/M/L, one pair pre-assembled)
  • Type-C Charging Cable x 1
  • User Manual x 1
Diagram showing QCY T13 earbuds, charging case, eartips, Type-C cable, and user manual

Illustration of the QCY T13 package contents.

3. Setup

3.1 Initial Charge

Before first-time use, ensure the earbuds and charging case are fully charged. Remove any protective stickers from the earbud charging pins. Connect the Type-C charging cable to the charging case and a power source.

  • Earbud Charging: Red light solid (charging), Blue light for 1 minute then off (fully charged).
  • Charging Case Charging: Red indicator solid (charging), Green indicator solid (fully charged).

3.2 Choosing and Assembling Eartips

Select the eartips that provide the best fit and sound isolation. Medium eartips are suitable for most users. A proper fit is crucial for optimal sound quality and to prevent the earbuds from falling out, especially during physical activity.

Diagram showing how to change eartips on QCY T13 earbuds

Instructions for removing and attaching eartips.

3.3 How to Wear

Identify the left (L) and right (R) earbuds. Insert the earbuds into your ears and adjust them to fit comfortably. Ensure the microphone is pointed towards your mouth for clear call quality.

Diagram showing correct and incorrect ways to wear QCY T13 earbuds

Visual guide for correctly wearing the earbuds.

4. Operating Instructions

4.1 Power On/Off

  • Power On: Open the charging case lid and pick up the earbuds, or long press the touch panel for approximately 1.5 seconds.
  • Power Off: Place the earbuds back into the charging case.

4.2 Pairing

First-time Pairing:

  1. Open the charging case lid and pick up the earbuds. They will automatically power on.
  2. On your mobile phone, open Bluetooth settings and search for "QCY-T13".
  3. Tap to connect. Once connected, the earbuds will automatically reconnect to this device in the future.

One-key into Pairing Mode (for new device or re-pairing):

  1. Ensure earbuds are in the charging case with the lid open.
  2. Long press the button on the charging case for 3 seconds until the green light of the charging case flashes 3 times.
  3. The earbuds will disconnect from the current phone and enter pairing mode, ready to connect to a new device.
Screenshot of phone Bluetooth settings showing QCY-T13 connected

Easy one-step pairing process.

4.3 Touch Controls

The QCY T13 earbuds feature sensitive touch controls for various functions:

ActionControl
Power OnLong press touch panel (approx. 1.5s)
Power OffPlace earbuds in charging case
Play/PauseDouble tap touch panel
Answer/End CallDouble tap touch panel
Reject CallLong press touch panel (approx. 1.5s)
Previous TrackLong press left touch panel (approx. 1.5s)
Next TrackLong press right touch panel (approx. 1.5s)
Voice AssistantTriple tap left touch panel
Low-latency ModeTriple tap right touch panel
Diagram illustrating various touch control gestures on the QCY T13 earbud

Visual guide for touch control functions.

4.4 QCY App Customization

Download the QCY App to unlock additional features and customize your earbuds. The app allows for language changes, default EQ modes, OTA firmware updates, and a unique 'Sleep Mode' to prevent unintended activations.

  • The app requires Android 6.0 or above / iOS 11 or above.
  • To exit Sleep Mode, place earbuds back into the charging case or disable it via the QCY App.
Screenshot of the QCY App interface on a smartphone

QCY App for customizing earbud settings.

4.5 Mono and Stereo Modes

Either earbud can work independently. You can use a single earbud (mono mode) or both earbuds (stereo mode) as needed. They are free to switch and fast to re-pair.

Diagram showing one QCY T13 earbud outside the case and another inside, illustrating independent use

Either earbud can be used alone.

5. Maintenance

5.1 Cleaning

Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use harsh chemicals, oils, or volatile liquids to clean the product.

5.2 Storage

Store the earbuds in their charging case when not in use to protect them and keep them charged. Avoid storing the earbuds in extreme temperatures (below 0°C or above 45°C).

5.3 Long-term Disuse

If the earbuds are left unused for over two weeks, please recharge them to maintain battery health.

6. Troubleshooting (FAQ)

Q: What should I do if the headset received is unable to turn on?
A: Confirm that the charging case has power left by pressing its button. If no LED illuminates, the case is dead. Place the earbuds in the charging case and charge for at least 1 hour. Ensure any protective stickers on the earbud charging pins are removed.
Q: What should I do if sound comes from only one earphone?
A: Put both earphones back into the charging case and close the lid. Then, take them out again to check if both ears have sound. If the issue persists, perform a factory reset.
Q: My phone prompts that it cannot connect. How do I resolve this?
A: Delete the pairing record for "QCY-T13" on your mobile phone's Bluetooth settings. Then, re-search and pair the earbuds again.
Q: How to solve the problem that there is no sound when listening to music or calling?
A: For Android phones, check the Bluetooth settings for the connected QCY-T13. There might be an option to enable/disable "Phone audio" and "Media audio". Ensure both are enabled. If still no sound, re-pair the earphones with your mobile phone.
Q: Why is there a delay in video or games?
A: Delays can occur due to factors such as the usage environment, network conditions, and the mobile phone's audio codec. The QCY T13 has a low-latency mode (triple tap right earbud) which may help.
Q: How to solve the problem of stuttering or intermittent sound?
A: If there are strong interfering signals nearby (e.g., numerous Wi-Fi, 5G/4G signals, or high-power electrical appliances), it may cause audio stuttering or intermittence. Try changing your environment or re-pairing the earbuds.
Q: Does it have Active Noise Cancellation (ANC)?
A: No, the QCY T13 features Environmental Noise Cancellation (ENC) for clearer calls, but it does not have Active Noise Cancellation (ANC) for listening to music.
Q: Is the product waterproof?
A: The earbuds are IPX5 sweatproof, meaning they can resist a sustained, low-pressure water jet spray. They are not designed for immersion in water.
Q: Does it work with iPhone/iOS?
A: Yes, the QCY T13 is compatible with both iOS (version 11 or above) and Android (version 6.0 or above) systems.

6.1 Factory Reset

If you experience persistent issues, a factory reset can often resolve them:

  1. Place both earbuds into the charging case.
  2. Long press the button on the charging case for 10 seconds.
  3. The red and blue lights on the earbuds will flash 3 times alternately, indicating a successful reset. The earbuds will then power on.

7. Specifications

FeatureDetail
Product NameT13
Pairing NameQCY-T13
Bluetooth Version5.1
Available SystemiOS / Android
Operation Range10m
Earbud Battery Life (single charge)Up to 8 hours (5 hours for calls)
Total Playtime (with charging case)Up to 40 hours
Bluetooth ProfilesHFP/HSP/A2DP/AVRCP
Charging Case Battery Capacity380mAh
Earbud Top-ups by Case2-3 times (for both earbuds)
Charging PortType-C
Driver Diameter7.2mm
Microphones4 (with ENC for HD calls)
Waterproof RatingIPX5 (Sweatproof)
MaterialABS, Plastic
CertificationsCE, FCC, RoHS, BQB
Diagram showing the internal components of a QCY T13 earbud, highlighting the 7.2mm dynamic driver

7.2mm dynamic driver for HIFI sound.

Image highlighting 4-mic ENC, 40-hour playtime, and fast charging features of QCY T13 earbuds

Key features: 4-mic ENC, 40-hour playtime, and fast charging.

8. User Tips

  • Eartip Fit: Experiment with all three sizes of eartips (S/M/L) to find the best fit for your ears. A good seal improves sound quality and helps prevent earbuds from falling out, especially during activities like running or gym workouts.
  • Value for Money: Many users praise the QCY T13 for its excellent value, offering good sound and long battery life at an affordable price.
  • Call Quality: The 4-mic ENC technology significantly improves call clarity by reducing background noise, making it suitable for calls in noisy environments.
  • Authenticity: The product is confirmed by numerous buyers to be original and of high quality.

9. Warranty and Support

9.1 Warranty Period

The product comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Free Service

During the warranty period, any defects caused by product quality issues are eligible for free repair, replacement, or return service, depending on the timeframe from purchase:

  • Within 7 days of purchase: Repair, replacement, or return.
  • Within 15 days of purchase: Repair or replacement.
  • Within 12 months of purchase: Repair.

To claim free service, contact your distributor with proof of purchase.

9.3 Exclusions from Warranty

The warranty does not cover damages or defects resulting from:

  • Unauthorized disassembly, modification, or use of non-original parts.
  • Physical damage such as water immersion, corrosion, dropping, crushing, or exposure to abnormal temperatures/humidity.
  • Natural disasters (e.g., earthquakes, lightning, abnormal voltage).
  • Failure to operate according to the user manual or improper human use.

9.4 Contact Information

For after-sales service or support, please contact:

Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China

10. Safety Warnings and Environmental Information

  • Do not disassemble, modify, or repair the earbuds for any reason, as this may lead to fire, electrical breakdown, or complete damage to the product.
  • Do not expose the product to excessively low or high temperatures (below 0°C or above 45°C).
  • Avoid using the indicator lights near the eyes of children or animals.
  • Do not use the product during thunderstorms, as this may cause malfunction and increase the risk of electric shock.
  • Do not clean the product with oil or other volatile liquids.
  • Caution: Prolonged use of earphones may cause hearing damage. Please manage your listening time appropriately.

10.1 Environmental Information

The environmental friendly use period for this product is 10 years under normal operating conditions. During this period, the product will not leak any hazardous substances. This product is recyclable and must be disposed of according to local regulations.

Certifications: CE, FCC, RoHS, BQB

© 2024 QCY. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.