1. Introduction
The QCY T18 MeloBuds are advanced True Wireless Earbuds designed for a superior audio experience. Featuring the Qualcomm QCC3040 chip and Bluetooth 5.2 technology, these earbuds offer optimized Bluetooth transmission, a stable connection, and enhanced sound quality. With aptX Adaptive technology, they deliver 24-bit/96kHz studio-level sound, while aptX Voice and 4-mic cVc 8.0 noise cancellation ensure crystal-clear calls. The T18 also supports intelligent multi-point connection to dual devices, allowing seamless switching between your tablet and phone.
2. Package Contents
Please check the box for the following items:
- Earbuds (1 pair)
- Charging case (1)
- Eartips (3 pairs: S/M/L, one pair pre-assembled)
- Type-C charging cable (1)
- User manual (1)

3. Product Overview
Familiarize yourself with the components of your QCY T18 Earphones:

- Earbuds: Touch panel, Eartip, LED indicator, Master microphone, Pogo pins (charging contacts).
- Charging Case: Type-C charging port, Charging case button, Charging case LED indicator.
4. Setup
4.1. How to Wear
For optimal sound and comfort, choose the eartips that best fit your ears. The product comes with multiple pairs of eartips (S/M/L).
- Push earbuds into your ear canal at a slight downward angle.
- Gently shake your head to ensure stability; the earbuds should not wobble.
- Adjust the microphone towards your mouth for clearer call quality.
- Ensure the sound hole is aligned with your ear canal for the best audio experience.

4.2. Initial Pairing
- Open the lid of the charging case; the earbuds will automatically power on.
- On your phone, enable Bluetooth and search for "QCY-T18".
- Tap to connect. If there are previous connection records, the earbuds will automatically reconnect to the last connected device upon powering on.
4.3. Multi-Point Connection
The QCY T18 supports connecting to two devices simultaneously, allowing you to seamlessly switch between them.
- Open the charging case lid. The earbuds will automatically connect to Device A (if previously paired).
- Turn off the Bluetooth function on Device A.
- On Device B, enable Bluetooth and search for "QCY-T18". Tap to connect.
- Once connected to Device B, turn on the Bluetooth function on Device A.
- Tap "QCY-T18" in Device A's Bluetooth pairing records to complete the multi-point connection.

4.4. QCY APP
For an enhanced and personalized earbud experience, download and install the QCY mobile application.
- The app requires Android 6.0 or above, or iOS 12 or above.
- The pop-up window feature for pairing is available on Android systems.

5. Operation
5.1. Touch Controls
The QCY T18 earbuds feature intuitive touch controls for various functions:

- Power On: Keep touching the touch panel for approximately 1.5 seconds.
- Power Off: Place earbuds back into the charging case and close the lid.
- Answer/End Call: Double touch the touch panel.
- Ignore Call: Keep touching the touch panel for approximately 1.5 seconds.
- Skip Track Backward: Keep touching the left touch panel.
- Skip Track Forward: Keep touching the right touch panel.
- Voice Assistant: Triple touch the left touch panel.
- Playback/Pause: Double touch the touch panel.
- Gaming Mode: Triple touch the right touch panel to turn on/off.
5.2. Gaming Mode
Activate Gaming Mode for a low-latency, lip-sync performance, enhancing your gaming experience. Triple touch the right earbud to toggle Gaming Mode on or off.

Official product video demonstrating features like multi-point connection, aptX Adaptive, and aptX Voice in various scenarios, including music production and outdoor activities.
6. Charging
6.1. Charging the Earbuds
The earbuds are charged automatically when placed inside the charging case. Ensure the charging case has sufficient power.
6.2. Charging the Case
Connect the provided Type-C charging cable to the charging port on the case and a suitable power source.
- Charging: The LED indicator on the case glows solid red.
- Fully Charged: The LED indicator on the case glows solid blue.
- Battery Level > 20%: The LED indicator on the case is blue.
- Battery Level < 20%: The LED indicator on the case is red.

6.3. Battery Life
A single full charge provides approximately 7 hours of playback or 4.5 hours of calling. The charging case extends the total playtime up to 30 hours with 3-4 top-ups for both earbuds.
7. Specifications
| Attribute | Value |
|---|---|
| Product Name | QCY T18 MeloBuds |
| Certified Model | BH21QT18B |
| Brand Name | QCY |
| QCY Model | T18 |
| Material | ABS, Plastic |
| Style | In-ear |
| Earcups Type | Sealed |
| Vocalism Principle | Dynamic |
| Driver Diameter | 10mm (Graphene dynamic driver) |
| Number Of Drivers | 4 |
| Impedance Range | up to 32 Ω |
| Resistance | 32Ω |
| Frequency Response Range | 20 - 20000Hz |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.2 |
| Bluetooth Chipset | Qualcomm QCC3040 |
| Communication | Wireless |
| Operation Range | 10m |
| Connectors | Type-C |
| Codecs | Apt-X, sbc (aptX Adaptive, aptX Voice) |
| Active Noise-Cancellation | No |
| Microphone | Yes (4 Mic + CVC Noise Cancellation) |
| Volume Control | Yes |
| Control Button | No (Touch Control) |
| Waterproof | Yes (IPX5) |
| NFC Technology | No |
| Support APP | Yes |
| Battery Capacity (Case) | 380mAh |
| Battery Life (Playback) | 7 hours (earbuds), 30 hours (with charging case) |
| Battery Life (Calling) | 4.5 hours |
| Charging Method | Charging case |
| Available System | iOS/Android |
| Certification | CE, FCC, RoHS, BQB |
| Origin | Mainland China |
8. Troubleshooting
- Only one earbud has sound: Put both earbuds back into the charging case, close the lid, then take them out again. Check if both earbuds have sound. If only one still has sound, perform a factory reset on both earbuds.
- Phone prompts unable to connect: Delete the pairing record for "QCY-T18" on your phone, then search and pair again.
- No sound during music/calls (Android): For Android phones, go to the Bluetooth settings for "QCY-T18". Turn off phone audio and media audio, then turn them back on. If there is still no sound, re-pair the earbuds with your phone.
- Delay in video/games: Delays can occur due to the usage environment, network conditions, and phone codec. Try changing your environment or re-pairing the connection.
- Stuttering/intermittent sound: Interference from strong Wi-Fi, 5G/4G signals, or high-power electrical appliances in the surrounding environment can cause stuttering. Move to a different environment or re-pair the connection.
- Earbuds not found by phone: Re-enter pairing mode or restore factory settings for the earbuds. If your phone's Bluetooth is malfunctioning, turn its Bluetooth function off and on again, or reboot the phone.
Factory Reset
- Place both earbuds into the charging case and open the lid.
- Press and hold the button on the charging case for approximately 10 seconds.
- The earbuds' LEDs will blink white, indicating they are resetting.
- After the factory reset is complete, the earbuds will automatically enter phone pairing mode.
Switching Paired Devices (from Device A to Device B)
- Place both earbuds into the charging case and open the lid.
- Press and hold the button on the charging case for approximately 4 seconds.
- One earbud's LED will glow solid blue, and the other will blink blue, indicating the earbuds are in pairing mode.
- On Device B, search for "QCY-T18" and tap to connect.
9. User Tips
- Always read the user manual carefully before using the earbuds and keep it for future reference.
- Ensure the earbuds are fully charged before their first use.
- If the earbuds are not used for more than two weeks, recharge them to maintain battery health.
- Use only chargers from qualified manufacturers.
- For the best compatibility and performance, it is recommended to connect the earbuds with a phone rather than a computer.
10. Maintenance
- Do not disassemble or modify your earbuds for any reason, as this may cause damage, fire, electronic breakdown, or complete product failure.
- Avoid storing the earbuds in extreme temperatures (below 0°C or above 45°C).
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Avoid using the indicator lights close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to prevent dysfunction and reduce the risk of electric shock.
11. Warranty & Support
11.1. Warranty Period
The warranty period for this product is 12 months from the date of purchase. Please retain your purchase receipt for warranty claims.
11.2. Free Service
During the warranty period, any defects caused by quality issues are eligible for free repair or exchange service. Please contact your distributor with your purchase receipt.
11.3. Warranty Exclusions
Free exchange service will not be provided under the following circumstances:
- Damages caused by unauthorized disassembly or modification.
- Defects or physical damages resulting from leaking, dropping, or improper use (e.g., immersion in water, corrosion, crushing, exposure to abnormal temperature/humidity).
- Damages caused by acts of God (e.g., natural disasters, earthquakes, lightning, abnormal voltage).
11.4. Contact Information
For after-sales service or support, please contact:
- QCY After-sales Service Center
- Phone: 4008-306-708
- Website: www.qcy.com
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China
A detailed user manual in PDF format is also available for download: QCY T18 User Manual (PDF)
12. Safety Information
- Hearing Protection: Prolonged use of earbuds at high volumes may cause hearing damage. Please manage your listening time and volume appropriately.
- Environmental Protection Use Period: Under normal usage conditions, the environmental protection use period for this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.
- Hazardous Substances: This product complies with relevant regulations regarding hazardous substances.