1. Introduction
The Lenovo LP40 Pro TWS Earphones are designed to provide a high-quality audio experience with advanced features for daily use, sports, and entertainment. This manual will guide you through the setup, operation, and maintenance of your new earphones.
Key features include:
- Upgraded Bluetooth 5.1 for stable and continuous connection.
- Ergonomic semi-in-ear design for comfortable wear.
- High-fidelity sound quality with metal moving coil horn units.
- Clear voice and video calls without noise.
- Dual host master-slave switching for flexible single earbud use.
- Type-C interface for convenient and fast charging.
- Life-level water resistance.
Figure 1: Lenovo LP40 Pro TWS Earphones in multiple colors.
2. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, please contact your retailer.
- 2 x Bluetooth Earphones (Left and Right)
- 1 x Charging Case
- 1 x USB Type-C Charging Cable
- 1 x User Manual (this document)
- Additional ear tips (may vary by model/variant)
Figure 2: Contents of the Lenovo LP40 Pro package.
3. Product Overview
Earbuds
- Touch Key: For controlling music, calls, and voice assistant.
- Microphone (MIC): For calls and voice commands.
- Indicator Light: Shows pairing, charging, and battery status.
Charging Case
- Charging Port: USB Type-C for charging the case.
- Indicator Light: Shows charging and battery status of the case.
Figure 3: Touch control functions for the earbuds.
4. Setup
4.1 Charging
Before first use, fully charge the earphones and charging case.
- Charging the Case: Connect the USB Type-C cable to the charging port on the case and a 5V power adapter. The red light will flash during charging and become steady red when fully charged. If the case battery is low, the green light will flash.
- Charging the Earbuds: Place the earbuds into the charging case. They will charge automatically. The earbud indicator light will be steady white during charging and turn off when fully charged. The charging case will show a steady green light while charging the earbuds, which will turn off once charging is complete. If the earbud battery is low, the white light will flash every 2 minutes.
Figure 4: The Type-C charging port on the earbud case.
4.2 Power On/Off
- Power On:
- Take the earbuds out of the charging case; they will power on automatically.
- Alternatively, long-press the touch key on either earbud for 2 seconds.
- Power Off:
- Place the earbuds back into the charging case; they will power off automatically.
- Alternatively, long-press the touch key on either earbud for 6 seconds.
4.3 Pairing
To pair your earphones with a device:
- Take both earbuds out of the charging case. They will automatically enter Bluetooth pairing mode, indicated by a flashing white light on the main earbud.
- Enable Bluetooth on your device (smartphone, tablet, etc.).
- Search for "Lenovo LP40 Pro" (or similar model name like LP23/T02 Pro) in the Bluetooth device list and select it to connect.
- Once connected, the earbud indicator lights will turn off. The earphones will automatically connect to the last paired device when taken out of the case.
Figure 5: Illustrates the stable Bluetooth 5.1 connection.
5. Operating Instructions
The earphones feature intuitive touch controls. Refer to Figure 3 for a visual guide.
5.1 Music Playback
- Play/Pause: Double-tap the touch key on either the left or right earbud.
- Next Track: Triple-tap the touch key on the right earbud.
- Previous Track: Triple-tap the touch key on the left earbud.
- Volume Up: Single-tap the touch key on the right earbud.
- Volume Down: Single-tap the touch key on the left earbud.
5.2 Call Management
- Answer Call: Double-tap the touch key on either earbud.
- End Call: Double-tap the touch key on either earbud.
- Reject Call: Press and hold the touch key on either earbud for 2 seconds.
5.3 Voice Assistant
These earphones support devices with voice assistant functionality.
- Activate Voice Assistant: Press and hold the touch key on either earbud for 2 seconds.
- Deactivate Voice Assistant: Press and hold the touch key on either earbud for 2 seconds.
6. Maintenance
To ensure the longevity and optimal performance of your earphones, follow these maintenance guidelines:
- Keep the earphones and charging case clean and dry. Wipe with a soft, dry cloth.
- Avoid exposing the product to extreme temperatures (hot or cold).
- While the earphones are designed with life-level water resistance (IPX5 for LP40 Pro), avoid submerging them in water or exposing them to heavy rain.
- If any liquid accidentally enters the product, disconnect it immediately and allow it to dry completely before use.
- Ensure your hands are dry when handling the product to prevent electric shock.
- Do not place the product near heat sources or expose it directly to fire.
- Avoid environments with strong electromagnetic forces, as this may cause product malfunction.
- Do not attempt to disassemble or replace any components of the earbuds yourself. This will void the warranty and may cause damage.
7. Troubleshooting
If you encounter issues with your earphones, try the following steps:
7.1 Resetting the Earphones
If the earbuds cannot properly pair with each other or with other devices, a reset may resolve the issue:
- Take both earbuds out of the charging case.
- Disconnect them from all paired devices.
- Separately tap each earbud's touch key 5 times until the earbud powers off.
- Place both earbuds back into the charging case. This should reset all data.
- After resetting, take them out again and attempt to pair them normally.
7.2 Common Issues
- Earbuds not charging: Ensure the charging cable and adapter are working correctly. Clean the charging contacts on both the earbuds and the case with a dry cotton swab.
- Only one earbud working: Try resetting the earphones as described above. Ensure both earbuds are fully charged.
- Bluetooth connection issues: Ensure the earphones are fully charged and within range of your device. Turn off and on your device's Bluetooth, then try pairing again. If issues persist, perform a reset.
- Sound leakage: Ensure the volume is not set to maximum. For optimal ear health, avoid prolonged listening at high volumes.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Lenovo (thinkplus) |
| Model | LP40 Pro (also available as LP23, T02 Pro variants) |
| Bluetooth Version | 5.1 (LP40 Pro), 5.4 (LP23, T02 Pro) |
| Wireless Range | ≥10 meters |
| Earbud Battery Capacity | 30mAh (LP40 Pro), 25mAh (LP23) |
| Charging Case Battery Capacity | 250mAh (LP40 Pro), 230mAh (T02 Pro) |
| Earbud Play Time | Approx. 5 hours (LP40 Pro), Approx. 4 hours (LP23), Approx. 24 hours (T02 Pro, with charging case) |
| Earbud Charging Time | Approx. 1.5 hours (LP40 Pro), Approx. 2 hours (LP23) |
| Case Charging Time | Approx. 1.5 hours |
| Driver Diameter | 13mm |
| Frequency Response Range | 20 - 20000 Hz |
| Sensitivity | 96 dB |
| Impedance Range | Up to 32 Ω |
| Charging Interface | USB Type-C |
| Waterproof Rating | IPX5 (LP40 Pro), Life-level (T02 Pro) |
| Features | Active Noise-Cancellation, Dual Connection, Built-in Microphone, Volume Control, App Support |
| Material | Plastic |
| Style | In-ear, Semi-open |
Figure 6: Detailed product parameters for Lenovo LP40 Pro.
Figure 7: Comparison of specifications between the 2020 Lenovo LP40 and 2022 Lenovo LP40 Pro.
9. User Tips
- The earphones are designed for comfort and a secure fit, making them suitable for various activities without easily falling out.
- After the initial pairing, your earphones will automatically connect to your device when removed from the charging case, streamlining your experience.
- For optimal ear health and to prevent sound leakage, it is recommended to avoid listening at maximum volume for extended periods.
- Always verify the color name on the back of the packaging box matches your order to ensure you received the correct product.
10. Warranty and Support
For any product-related issues, warranty claims, or technical support, please contact the seller or the official Lenovo support channels. Keep your purchase receipt as proof of purchase.
11. Important Safety Information
- Do not disassemble or attempt to repair any components of the earbuds. Unauthorized modifications can lead to damage, injury, and void your warranty.
- Avoid placing the earbuds or charging case in water or any other liquids. While they offer water resistance, they are not designed for submersion.
- If liquid accidentally enters the product, immediately disconnect it from any power source and allow it to dry completely before attempting to use it again.
- Ensure your hands are dry when handling the product, especially during charging or connecting, to prevent electric shock.
- Do not place the product near heat sources, such as radiators, stoves, or direct sunlight, and avoid exposing it to open flames.
- Keep the product away from environments with strong electromagnetic fields, as this can cause malfunctions or damage.