Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ULNA CPE609 Gigabit Wireless Bridge. This device is designed to extend network connectivity wirelessly over long distances, ideal for outdoor environments and various applications.

Image: Two ULNA wireless bridges establishing a point-to-point connection.
Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Avoid exposing the device to extreme temperatures or moisture. Doing so may damage the device and void the warranty.
- Do not leave the device in an outdoor car for a long time, as high temperatures may cause the internal components to degrade.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture beyond its IP65 rating.
Compliance Information:
- EN 55032:2015+A11:2020+A1:2020
- EN 55035:2017+A11:2020
- EN IEC 61000-3-2:2019+A1:2021
- EN 61000-3-3:2013+A1:2019+A2:2021
- EN IEC 62368-1:2020+A11:2020
Package Contents
Ensure all items are present and in good condition upon unboxing:
- 2 x ULNA CPE609 Gigabit Wireless Bridge units
- 2 x Gigabit POE Adapters (24V)
- 2 x Cat 5e Network Cables
- 2 x Metal Hoops (for mounting)
- 1 x Mounting Screw Set
- 1 x User Manual (this document)
Product Overview
Each CPE609 unit features several ports and indicators for easy setup and monitoring.

Image: Detailed view of the CPE609 unit showing ports and indicators.
Ports and Buttons:
- LAN1 (100Mbps): Ethernet port for network connection.
- LAN2 (1000Mbps): Gigabit Ethernet port for high-speed network connection.
- Digital Tube: Displays the current operating mode (A for Transmitter, B for Receiver) and pairing status.
- A-B Button: Used to switch between Transmitter (A) and Receiver (B) modes.
- Reset Button: Used to reset the device to factory defaults.
- DC (Unavailable): DC power input, not used with PoE.
LED Indicators:
- PWR (Power Indicator): Indicates power status.
- LAN1/LAN2: Indicate activity on the respective LAN ports.
- WLAN Signal Light: Displays wireless signal strength.
Specifications
| Feature | Description |
|---|---|
| Brand Name | ULNA |
| Model | CPE609 |
| Wireless Transmission Speed | Up to 1200Mbps (between bridges), 1000Mbps (network speed) |
| Transmission Distance | Up to 5KM (unobstructed) |
| Antenna | Built-in 16dBi directional antenna |
| Frequency | 5.8 GHz (11ac technology, Dual-Band) |
| Standards And Protocols | Wi-Fi 802.11a/g |
| Power Supply | 24V PoE Adapter (included) |
| Outdoor Features | IP65 Waterproof, Lightning Protection, Low Temperature Resistance |
| Support Mesh | Not Supported |
| With Modem Function | Yes |
| Recommended Uses | Home, Warehouses, Gardens, Barns, Offices, Shops, Garages, Monitoring |

Image: Features highlighting outdoor suitability: 24V POE Power, Lightning Protection, IP65 Waterproof, and Low Temperature Resistance.
Setup Guide
The CPE609 units are pre-configured for plug-and-play operation. Follow these steps for a successful point-to-point connection.
1. Initial Preparation
- Remove all protective films from both CPE609 devices.
- Ensure you have a clear line of sight between the two locations where the bridges will be installed for optimal performance.
2. Powering On and Pairing

Image: Plug and Play setup with PoE adapters and successful pairing indication.
- Connect one end of a Cat 5e Network Cable to the LAN2 (1000Mbps) port of a CPE609 unit.
- Connect the other end of the network cable to the "POE" port on the 24V PoE Adapter.
- Plug the PoE Adapter into a power outlet. The PWR indicator on the CPE609 unit should light up.
- Repeat steps 1-3 for the second CPE609 unit.
- The units are designed for automatic pairing. Once both are powered on, they will attempt to establish a connection. The digital tube on one unit will display 'A' (Transmitter mode) and the other will display 'B' (Receiver mode). The WLAN signal lights will indicate connection strength.
3. Connecting to Your Network

Image: Point-to-point wireless bridge setup connecting a camera to a network switch/laptop.
- Transmitter (A) Side: Connect a network cable from your router or network switch to the "LAN" port on the PoE Adapter connected to the Transmitter CPE609.
- Receiver (B) Side: Connect a network cable from the "LAN" port on the PoE Adapter connected to the Receiver CPE609 to your client device (e.g., PC, NVR, IP camera, secondary router).
4. Mounting
Use the provided metal hoops and mounting screw set to securely attach the CPE609 units to poles or walls in your desired outdoor locations. Ensure they are positioned for optimal line of sight.
Operation
The CPE609 units operate in either Transmitter (A) or Receiver (B) mode. They are pre-configured to automatically establish a link.
Mode Switching:
- If you need to manually switch a unit's mode, press the "A-B Button" on the device. The digital tube display will change between 'A' and 'B'.
- Ensure one unit is set to 'A' (Transmitter) and the other to 'B' (Receiver) for a point-to-point connection.
Signal Monitoring:
- Observe the WLAN Signal Lights on both units. More illuminated lights indicate a stronger wireless signal. Adjust alignment if necessary to maximize signal strength.
Applications:

Image: Wide range of applications for the wireless bridge, such as extending network to barns, shops, farms, warehouses, garages, and for camera monitoring.
The CPE609 is versatile and can be used in various scenarios:
- Extending home network to a second building (e.g., garage, shed, barn).
- Providing internet access to remote offices or shops.
- Setting up surveillance systems with IP cameras over long distances.
- Connecting devices in warehouses or industrial areas.
- Point-to-multipoint configurations for multiple cameras (requires additional units).

Image: Point-to-multipoint setup for extending camera monitoring range.
Maintenance
To ensure the longevity and optimal performance of your ULNA CPE609 Wireless Bridge, consider the following maintenance tips:
- Regular Cleaning: Periodically clean the exterior of the units to remove dust, dirt, and debris that may accumulate, especially on the antenna surface. Use a soft, dry cloth.
- Inspect Cables and Connections: Regularly check all network cables and power connections for any signs of wear, damage, or corrosion. Ensure they are securely plugged in.
- Firmware Updates: Check the manufacturer's website for any available firmware updates. Keeping the firmware up-to-date can improve performance, stability, and security.
- Environmental Checks: Although designed for outdoor use (IP65 waterproof, lightning protection, low temperature resistance), ensure the mounting remains secure and the units are not exposed to extreme physical stress or prolonged submersion.
- Resetting: If experiencing persistent issues, a factory reset using the Reset button may resolve them. Note that this will erase all custom configurations.
Troubleshooting
If you encounter issues with your wireless bridge, try the following troubleshooting steps:
- No Power:
- Ensure the PoE adapter is correctly connected and plugged into a working power outlet.
- Check the network cable connecting the CPE unit to the PoE adapter.
- No Wireless Link:
- Verify that one unit is set to Transmitter (A) mode and the other to Receiver (B) mode.
- Ensure there is a clear line of sight between the two units. Obstructions like trees or buildings can significantly degrade performance.
- Check the WLAN Signal Lights. If they are low or off, adjust the physical alignment of the units.
- Try resetting both units to factory defaults and re-pairing them.
- Slow Network Speed:
- Confirm the LAN2 (1000Mbps) port is used for the main network connection where high speed is required.
- Check for environmental interference. The 5.8G frequency is less prone to interference than 2.4G but can still be affected by other devices.
- Ensure optimal alignment for the strongest signal strength.
- Verify that your connected devices and network infrastructure support Gigabit speeds.
- Intermittent Connection:
- Check for physical obstructions that might temporarily block the signal (e.g., moving vehicles, swaying trees).
- Ensure all cables are securely connected and not damaged.
- Consider potential sources of electromagnetic interference.
User Tips
- Line of Sight is Crucial: For the advertised 5KM range and optimal performance, ensure an unobstructed line of sight between the two bridge units. Trees and other physical barriers will significantly reduce range and speed.
- Mounting Angle: When setting up point-to-multipoint connections, consider the maximum effective angle for the slave bridges to communicate with the master bridge. While the product is directional, some flexibility exists for shorter distances.
- Power over Ethernet (PoE): Utilize the included 24V PoE adapters for simplified outdoor installation, as they provide both power and data over a single Ethernet cable.
- Check Signal Strength: Always monitor the WLAN signal lights during installation and alignment to achieve the best possible connection quality.
Warranty & Support
For specific warranty details and support, please refer to the official product documentation or contact the manufacturer directly. The manufacturer is ShenZhen Sky Blue Ocean Technology Co., Limited, and their EU Authorized Representative is Apex CE Specialists GmbH.
You can find additional information and contact details in the full user manual PDF: User Manual (PDF).