1. Introduction
This GLEDOPTO 2.4G RF Remote Control (Model: GL-RC-009) utilizes a worldwide universal 2.4GHz frequency and GFSK control mode. It offers advanced features such as low power consumption, long transmission distance, strong anti-interference capabilities, and a fast communication rate. This remote is designed to dim and adjust the light color, color temperature (CCT), saturation, and brightness for compatible smart lights.
Important Note: This remote control is 2.4G RF (not Zigbee). It is compatible only with GLEDOPTO Pro version products and 2.4G RF version products. The saturation adjustment feature is exclusively applicable to 2.4G RF series products, not Pro version products.
2. Product Features
- Control Type: 2.4G RF Remote Control
- Adjustable Parameters: RGB Color, Color Temperature (CCT), Brightness, Saturation
- Group Control: 8-Zone Group Management
- Lighting Modes: 9 dynamic lighting modes
- Control Distance: Up to 30 meters
- Compatibility: Works with GLEDOPTO Pro series and 2.4G RF series products
3. Specifications
| Attribute | Value |
|---|---|
| Model Number | GL-RC-009 |
| Material | Plastic (PC) |
| Programs / Modes | 9 kinds |
| Size | 157 x 53 x 18 mm |
| Net Weight (N.W.) | 63.3g |
| Gross Weight (G.W.) | 76.0g |
| Transmitting Power | 6dBm |
| Modulation Method | GFSK |
| Standby Power | 15uA |
| Control Distance | 30 meters |
| Working Temperature | -20°C ~ 60°C |
| Input Voltage | 3V (2*AAA Battery) |
| Certification | CE |
| Origin | Mainland China |
4. Setup
4.1. Battery Installation
The remote control requires 2*AAA 1.5V batteries (not included).
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2. Pairing Method
The light must be paired with the remote control before it can be controlled.
- Ensure the light is completely powered off for more than 10 seconds.
- Power on the light.
- Within 3 seconds of powering on the light, short press one of the 'ON' buttons (from 1 to 8 groups) on the remote control.
Pairing Confirmation:
- RF Series: The light will turn white and flicker 3 times, indicating successful pairing.
- PRO Series: The LED light will turn green, indicating successful pairing.
If pairing fails, repeat the steps above.
Pairing Notes:
- One light can be paired by a maximum of four remote controls. If a fifth remote control is successfully paired, the first paired remote control will automatically lose its pairing.
- One lamp can be paired with any single group among the 1-8 groups on the remote control. Once paired with one group, it cannot be simultaneously paired with another group on the same remote control.
5. Operating Instructions
Familiarize yourself with the remote control's buttons and their functions:
- Color Ring: Touch the color ring to change the light color (RGB).
- Color Temperature / Saturation Bar:
- In CCT mode, slide on this bar to change the color temperature.
- In RGB mode, slide on this bar to adjust the color saturation.
- Brightness Bar: Slide on the brightness bar to dim or brighten the light.
- 'W' Button: Press this button to switch the light into CCT (Color Temperature) mode.
- Master Turn-on (ON): Press to turn on all connected devices.
- Master Turn-off (OFF): Press to turn off all connected devices.
- 'M' Button: Press to switch between different dynamic lighting modes (9 kinds).
- 'S+' Button: In dynamic mode ('M' mode), press to speed up the dynamic effect.
- 'S-' Button: In dynamic mode ('M' mode), press to slow down the dynamic effect.
- Group Turn-on (1-8): Press the 'ON' button for a specific group (1-8) to turn on lights assigned to that group.
- Group Turn-off (1-8): Press the 'OFF' button for a specific group (1-8) to turn off lights assigned to that group.
6. Un-pairing Method
To un-pair a light from the remote control:
- Ensure the light is completely powered off for more than 10 seconds.
- Power on the light.
- Within 3 seconds of powering on the light, short press the 'ON' button 5 times.
Un-pairing Confirmation:
- PRO Series (connected to ZigBee hub): The LED will blink 3 times under its existing color.
- PRO Series (not connected to ZigBee hub): The LED will blink 3 times until it is fully bright.
- RF Series: The light will turn white and flicker 9 times, indicating successful un-pairing.
7. Maintenance
- Battery Replacement: If the indicator light on the remote flashes quickly during use, replace the batteries immediately. Use only good quality AAA batteries to prevent liquid leakage that could damage the remote control.
- Environmental Conditions: This 2.4G remote control is a precision electronic product. Keep it away from damp, high temperature, dusty, and high-pressure environments.
- Usage Environment: Always use the remote indoors in a dry environment free from static electricity.
- Interference: Do not use the remote control in areas filled with metal objects or strong electromagnetic waves, as this can seriously affect the control distance and performance.
8. Troubleshooting
- Remote not responding or control distance reduced:
- Check battery level; replace if the indicator light flashes quickly.
- Ensure the remote is used in a dry, indoor environment away from dampness, high temperatures, dust, or high pressure.
- Avoid using the remote near large metal objects or strong electromagnetic sources, which can interfere with the 2.4G RF signal.
- Pairing fails:
- Ensure the light was powered off for at least 10 seconds before attempting to pair.
- Make sure to press the 'ON' button within 3 seconds of powering on the light.
- Repeat the pairing steps carefully.
9. User Tips
- For optimal performance, ensure a clear line of sight between the remote and the controlled light, especially if experiencing occasional signal drops.
- Regularly check the remote's battery status to avoid unexpected interruptions during use.
- When controlling multiple groups, clearly label your groups (1-8) for easier management.
10. Warranty and Support
This GLEDOPTO remote control comes with a 2-year warranty for indoor products.
For further assistance or detailed instructions, please refer to the official user manual PDF available at: GLEDOPTO Remote Control User Manual (PDF).
Disclaimers:
- This manual may contain inaccuracies, discrepancies, or typographical errors. The manufacturer reserves the right to update the contents of this manual, product functions, software, and hardware without prior notice.
- Product parameters are subject to change without prior notice due to continuous technological advancements.
- This manual is for reference and guidance only and does not guarantee complete consistency with the actual product. The actual application is subject to the actual product.
- The parts, components, and accessories mentioned in this manual do not necessarily represent the standard configuration of the product. The detailed configuration is subject to the packing list.
- All texts, tables, and pictures in this manual are protected by relevant national laws and may not be used without permission by the supplier.
- The copyright and the right of final interpretation of this manual are reserved by the company.
