1. Product Overview
The JUWEL EasyFeed is an automatic fish feeder designed for use in any aquarium. It provides scheduled feeding for your fish, ensuring they receive food even when you are away. The feeder features a programmable timer and an adjustable feed container.
2. Setup and Installation
- Battery Installation: The feeder requires 2x AA Mignon batteries (not included). Open the battery compartment, insert the batteries according to the polarity markings, and close the compartment securely.
- Filling the Feed Container: Open the feed container and fill it with your preferred fish food. Pellet form food is ideal for automatic feeders. The container has a volume designed for up to 60 feeds.
- Mounting: The JUWEL EasyFeed can be fitted simply and quickly to any JUWEL aquarium using the appropriate mounting support. Ensure the feeder is securely positioned above the water surface, allowing food to drop directly into the tank.
3. Operating Instructions
The JUWEL EasyFeed can be programmed for two feeding cycles per day, with feeding intervals of six hours. The digital display and control buttons (HR, MIN, SET) allow for precise scheduling.
Setting the Clock
- Press and hold the 'SET' button until the hour display flashes.
- Use the 'HR' button to adjust the hour.
- Press 'SET' again, and the minute display will flash.
- Use the 'MIN' button to adjust the minutes.
- Press 'SET' to confirm the time.
Programming Feeding Times
The feeder supports up to three feeding times, indicated by '1', '2', '3' on the display. You can program two distinct feeding cycles.
- Press the 'SET' button briefly to enter feeding program mode. The '1' indicator will flash.
- Use 'HR' and 'MIN' to set the desired time for the first feeding.
- Press 'SET' to confirm the first feeding time. The '2' indicator will flash.
- Repeat the process to set the second feeding time.
- If you only require two feedings, you can leave the third setting unprogrammed or set it to the same time as another feeding.
- The feeder will automatically dispense food at the programmed times.
Manual Feeding
To dispense food manually, press the 'M' button (if available on your model) or a dedicated manual feed button. This will dispense a single portion of food without affecting the programmed schedule.
4. Maintenance
- Cleaning the Feed Container: Regularly check and clean the feed container to prevent food residue buildup and ensure proper dispensing. Remove any old or damp food.
- Ventilation: In environments with high humidity, the feeder is designed to be ventilated using an ordinary air pump. Connect a small air pump to the designated port to keep the food dry and prevent clumping.
- Battery Replacement: Replace batteries when the display dims or the feeder stops operating reliably. Always use fresh AA Mignon batteries.
5. Troubleshooting
- Feeder not dispensing food:
- Check if batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure the feed container is not empty.
- Verify that the food is not clumped or blocking the dispensing mechanism. Clean the container if needed.
- Confirm that feeding times are correctly programmed.
- Food getting damp/clumping:
- Ensure the feeder is not exposed to excessive humidity.
- Consider using an air pump for ventilation as described in the Maintenance section.
- Use pellet-form food, which is less prone to clumping.
- Display not working:
- Check and replace batteries.
6. Specifications
| Feature | Specification |
|---|---|
| Product Code | 89000 |
| Product Name | EasyFeed – Automatic Feeder |
| Measurements | 15 x 7 x 7 cm |
| Battery Type | 2 x Mignon AA (1.5V each) |
| Material | Plastic |
| LCD Display | Yes |
| Volume (Feed Container) | 200g |
| Number of Gears (Feeding Frequency) | 2 |
| Max Output | 100g |
| Min Output | 50g |
| Origin | Mainland China |
7. User Tips
- For best results and to prevent clogging, use dry, pellet-form fish food. Flake food can absorb moisture and clump more easily.
- If your aquarium environment is very humid, consider utilizing the feeder's ventilation feature with a small air pump to keep the food dry.
- Before going on an extended trip, test the feeder for a few days to ensure it dispenses the correct amount of food at the scheduled times.
8. Warranty and Support
The JUWEL EasyFeed Automatic Aquarium Fish Feeder comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support or warranty inquiries, please contact your retailer or the official JUWEL support channels.
