LIGE Men's Watch LG8922 Instruction Manual

1. Introduction

Thank you for choosing the LIGE LG8922 Men's Sport Watch. This watch combines a robust design with practical features, including a dual analog and digital display, chronograph, alarm, and 50M water resistance. This manual provides detailed instructions to help you get the most out of your new timepiece.

LIGE LG8922 Sport Watch with its packaging.

2. Package Contents

Upon opening your LIGE LG8922 watch package, you should find the following items:

• 1 x Genuine LIGE LG8922 Watch
• 1 x User Manual (this document)
• 1 x Warranty Card
• 1 x Cleaning Wipe

Included accessories with the LIGE LG8922 watch.

3. Specifications

Detailed size parameters and key features of the watch.

4. Setup and Operation

4.1 Button Functions

Watch function button introduction.

• LIGHT Button (Top Left): Activates the LED backlight for visibility in low-light conditions.
• MODE Button (Bottom Left): Cycles through different modes such as Time, Alarm, Chronograph (Stopwatch), and Date.
• START Button (Top Right): Used to start/pause functions (e.g., stopwatch) or adjust settings in certain modes.
• RESET Button (Bottom Right): Used to reset functions (e.g., stopwatch) or switch between settings during adjustment.
• Crown (Middle Right): Used to adjust the analog time. Pull out to set, push in to engage.

4.2 Setting the Time and Date

1. Setting Analog Time: Pull out the crown (middle right button) and rotate it to set the analog hands to the correct time. Push the crown back in to secure.
2. Setting Digital Time/Date:
   • Press the MODE button repeatedly to cycle through modes until you reach the desired setting mode (e.g., Time Setting, Date Setting).
   • Once in the setting mode, use the START and RESET buttons to adjust the values (hours, minutes, date, day, etc.). The START button typically increases the value, and the RESET button moves to the next setting field or decreases the value.
   • Refer to the specific instructions in the included Use Manual for detailed steps on each digital setting.

4.3 Using the Chronograph (Stopwatch)

1. Press the MODE button until the stopwatch display appears.
2. Press the START button to begin timing.
3. Press the START button again to pause timing.
4. Press the RESET button to clear the stopwatch to zero.

4.4 Using the Alarm

1. Press the MODE button until the alarm setting display appears.
2. Use the START and RESET buttons to set the desired alarm time.
3. Activate or deactivate the alarm as per the specific instructions in the Use Manual.

4.5 LED Backlight

Press the LIGHT button (top left) to illuminate the digital display for a few seconds, allowing you to read the time in the dark.

5. Water Resistance

The LIGE LG8922 watch is rated for 5ATM (50 meters) water resistance. This means it is suitable for:

• Handwashing
• Cold baths
• Car washing
• Short-term leisure swimming

Important Note:

• Do NOT press any buttons underwater, especially when swimming or diving, as this can compromise the water seal.
• The watch is NOT suitable for diving, hot water activities (e.g., hot showers, saunas), or prolonged submersion.

50M water resistance details.

General water resistance guidelines for watches.

6. Maintenance

• Cleaning: Use the provided soft wipe or a clean, dry cloth to gently clean the watch case and strap. Avoid using harsh chemicals or abrasive materials.
• Avoid Extreme Conditions: Protect your watch from extreme temperatures (hot or cold), strong magnetic fields, and direct exposure to solvents or detergents.
• Impact Protection: While the watch is shock-resistant, avoid severe impacts or dropping it to prevent damage.
• Battery Replacement: When the battery runs low, it is recommended to have it replaced by a qualified watch technician to ensure the water resistance seal is maintained.

7. Troubleshooting

• Watch Not Working: Check if the battery needs replacement. If the digital display is blank or the analog hands are not moving, the battery may be depleted.
• Incorrect Time/Date: Follow the instructions in Section 4.2 to reset the time and date. Ensure the crown is fully pushed in after setting the analog time.
• Water Inside Watch: If you notice condensation or water inside the watch, stop using it immediately and seek professional service. This indicates a compromised water seal.
• Buttons Not Responding: Ensure the buttons are not stuck or obstructed. If the issue persists, professional inspection may be required.

8. User Tips

• Night Visibility: The watch features a luminous pointer and LED backlight. Use the LIGHT button for easy time-telling in the dark.
• Comfort for Daily Wear: The silicone strap is designed for comfort and durability, making it suitable for extended daily wear.
• Sporty Style: The watch's strong sports style and dual display make it a versatile accessory for various activities.

Luminous display for night visibility.

9. Warranty and Support

LIGE watches come with a two-year warranty from the date of purchase, covering manufacturing defects. Please retain your warranty card and proof of purchase for any warranty claims.

For support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official LIGE website.

10. Product Video

Watch this video for a dynamic overview of the LIGE LG8922 watch's features and design.