Introduction
The Takstar TS-3310UH is a high-performance UHF wireless microphone system designed for a wide range of applications including KTV, conferences, home entertainment, and outdoor performances. This system utilizes advanced UHF integrated circuit technology to provide stable and reliable audio transmission with multiple selectable frequency channels. Key features include a special channel ID code (tone-key) to prevent crosstalk, an intuitive LCD display for real-time status, one-key auto scan for optimal frequency selection, and easy IR synchronization between the transmitter and receiver. It offers versatile connectivity with independent balanced XLR and unbalanced 6.3mm combo audio outputs.
Package Contents
Please check the package carefully to ensure all items are present and in good condition:
- TS-3310UH Receiver: 1 pc
- Audio Output Cable: 1 pc
- Power Adapter: 1 pc
- Handheld Microphone: 2 pcs
- AA Battery: 4 pcs
- Mic Anti-Roll Ring: 2 pcs
- User Manual: 1 pc
Product Overview
Receiver Unit
The receiver unit is the central hub of the wireless microphone system, responsible for receiving signals from the microphones and outputting audio to your sound system.
- **LCD Display:** Shows real-time work status, frequency, and channel information.
- **IR Sensor:** Used for infrared synchronization with the handheld microphones.
- **SET Buttons:** For navigating menus and adjusting settings.
- **POWER Button:** To turn the receiver on or off.
- **ANT-A / ANT-B:** Connectors for the external antennas.
- **MIC-A OUTPUT / MIC-B OUTPUT:** Balanced XLR outputs for individual microphone channels.
- **MIX OUTPUT:** Unbalanced 6.3mm (1/4") output for mixed audio from both microphones.
- **POWER Input:** DC13-15V 450mA power input.
Handheld Microphones
The system includes two handheld microphones, each with its own display and controls.
- **LCD Display:** Shows current frequency and battery status.
- **POWER Button:** To turn the microphone on or off.
- **Battery Compartment:** Located at the bottom, holds two AA batteries.
- **IR Sensor:** For synchronization with the receiver.
Setup
- **Connect Antennas:** Screw the two external antennas securely into the ANT-A and ANT-B connectors on the rear of the receiver. Position them vertically for optimal reception.
- **Power Connection:** Connect the provided power adapter to the DC13-15V 450mA input on the receiver's rear panel, then plug it into a suitable power outlet.
- **Audio Output:**
- For individual microphone outputs, connect XLR cables from MIC-A OUTPUT and MIC-B OUTPUT to your mixer or amplifier.
- For a mixed output, connect a 6.3mm (1/4") cable from the MIX OUTPUT to your mixer or amplifier.
Figure 6: Audio Output Interfaces - **Install Microphone Batteries:** Unscrew the bottom part of each handheld microphone and insert two AA batteries, ensuring correct polarity. Screw the bottom back on.
- **Power On:** Press the POWER button on the receiver to turn it on. Then, press the POWER button on each microphone.
- **IR Synchronization:**
- On the receiver, use the SET buttons to select the desired channel for Microphone A.
- Hold the IR sensor of Microphone A close to the IR sensor on the receiver.
- Press the IR sync button (usually labeled 'SET' or 'IR') on the receiver. The microphone and receiver should synchronize, and the microphone's display will show the matching frequency.
- Repeat this process for Microphone B.
Figure 7: IR Synchronization - **Auto Scan (Optional but Recommended):** If you experience interference, use the one-key auto scan function on the receiver to find the best available clean frequency. Refer to the operating instructions for details.
Operating Instructions
- **Power On/Off:**
- To turn on the system, press the POWER button on the receiver, then on each microphone.
- To turn off, press the POWER button on each microphone, then on the receiver.
- **Frequency Selection (Manual):**
- On the receiver, use the 'SET' buttons to navigate to the frequency adjustment mode.
- Select the desired frequency for each channel (A and B).
- Perform IR synchronization after changing frequencies.
- **Auto Scan for Clean Frequency:**
- Press the 'SET' button on the receiver to initiate the auto scan function.
- The receiver will automatically search for and select a clear, interference-free frequency.
- Once a new frequency is selected, perform IR synchronization with the corresponding microphone.
Figure 8: Auto Scan Function - **Volume Control:** Adjust the volume levels on your connected mixer or amplifier. The microphones do not have independent volume controls.
- **Tone-Key ID:** The system employs a special tone-key ID function to prevent crosstalk and dropouts, ensuring a stable connection.
Maintenance
- **Cleaning:** Use a soft, dry cloth to clean the receiver and microphones. Do not use abrasive cleaners or solvents.
- **Storage:** Store the system in a dry, cool place away from direct sunlight and extreme temperatures.
- **Battery Care:** Remove batteries from microphones if they will not be used for an extended period to prevent leakage.
- **Antennas:** Handle antennas with care to avoid bending or breaking.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphone |
|
|
| Interference or poor sound quality |
|
|
| Short transmission range |
|
|
Specifications
Receiver (TS-3310UH)
| Feature | Specification |
|---|---|
| Frequency Range | 470-932MHz (segmented) |
| Frequency Stability | ± 10ppm |
| Sensitivity | 10dBuV |
| Adjacent Channel Rejection | 65dB |
| Image Frequency Rejection | 75dB |
| Audio Output | 200mV |
| Output Impedance | XLR connector: 200Ω; 1/4” connector: 1KΩ |
| S/N Ratio | 100dB |
| Distortion | ＜0.1% |
| Frequency Response | 50Hz-18KHz |
| Receiving Distance | 100 m |
| Function Display | LCD |
| Power Supply | DC12V |
| Dimension | 482*490*44mm |
| Weight | approx. 4650g |
| Material | Iron case, aluminum panel |
Transmitter (Handheld Microphone)
| Feature | Specification |
|---|---|
| Frequency Range | 470-932MHz (segmented) |
| Frequency Stability | ± 10ppm |
| Transmit Power | 10mW |
| Receiving Distance | 100 m |
| Harmonic Suppression | >65dB |
| Modulation | FM |
| Max Modulation Degree | 75K |
| Operating Voltage | 3V |
| Operating Current | 120mA |
| Function Display | LCD |
Note: The above data is measured by Takstar laboratory.
User Tips
- **Battery Life:** To maximize battery life, turn off microphones when not in use. Always carry spare AA batteries for extended sessions.
- **Optimal Range:** While the system boasts a 100m receiving distance, performance can vary based on environmental factors. For critical applications, test the range in your specific environment.
- **Multiple Systems:** When using multiple TS-3310UH systems simultaneously, utilize the auto scan function and IR sync for each pair to ensure they operate on distinct, clear frequencies and avoid interference.
- **Anti-Roll Rings:** Attach the provided anti-roll rings to the microphones to prevent them from rolling off flat surfaces and to provide some protection against minor impacts.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact your authorized Takstar dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
