DVB T2 Digital Terrestrial Receiver 120

DVB T2 Digital Terrestrial Receiver TV Box User Manual

Model: 120

Brand: DVB T2 Digital Terrestrial Receiver

1. Introduction

The DVB T2 Digital Terrestrial Receiver TV Box is a device designed to receive digital terrestrial television signals. It processes signals received via an antenna, demodulates audio and video, and outputs them to your television, allowing you to watch free-to-air TV channels. This device supports H.265 HEVC decoding for high-efficiency video compression.

DVB T2 TV Box highlighting features like H.265, EPG, Full HD, PVR, IPTV, and WiFi support
Figure 1: DVB T2 TV Box highlighting features like H.265, EPG, Full HD, PVR, IPTV, and WiFi support.

Key characteristics:

  • Utilizes terrestrial signals for free TV viewing.
  • Reproduces the original audio and video source, meaning audio will be in its original broadcast language without translation.

2. Package Contents

Please check the box for the following items:

  • 1 x Main TV Box Unit
  • 1 x AV-out Cable
  • 1 x Remote Control
  • 1 x User Manual (this document)
  • 1 x WiFi Receiver (if purchased with the WiFi option)
  • 1 x Power Adapter (EU, US, or UK plug type depending on region)
Package contents including TV box, remote, AV cable, and power adapter
Figure 2: Typical package contents for the DVB T2 TV Box.

3. Setup Guide

Follow these steps to set up your DVB T2 Digital Terrestrial Receiver TV Box:

  1. Connect the Antenna: Connect your terrestrial antenna (outdoor or radar-type pot antenna) to the "RF IN" port (1) on the back of the TV Box. An antenna is essential for receiving signals.
  2. Connect to TV:
    • For High Definition (HD) output, connect an HDMI cable (not included) from the "HD PORT" (2) on the TV Box to an HDMI input on your television.
    • Alternatively, for standard definition output, connect the provided AV cable from the "VIDEO" (3), "L" (4), and "R" (5) ports on the TV Box to the corresponding AV inputs on your television.
  3. Connect Power: Plug the power adapter into the "AC100-240V" port (6) on the TV Box and then into a wall outlet.
  4. Connect WiFi Receiver (Optional): If you intend to use internet-based features like YouTube or IPTV, plug the USB WiFi Receiver (if purchased) into the USB port (11) on the front of the TV Box.
  5. Initial Power On: Turn on your TV Box and your television. Select the correct input source (HDMI or AV) on your TV.
Back and front panel connections of the DVB T2 TV Box with numbered labels
Figure 3: Connection ports on the DVB T2 TV Box. (1) RF IN, (2) HD PORT, (3) VIDEO, (4) L (Audio Left), (5) R (Audio Right), (6) AC100-240V Power, (7) POWER, (8) CH+, (9) CH-, (10) MENU, (11) USB.
Video 1: Demonstration of connecting the DVB T2 TV Box and basic operation.

4. Operating Instructions

4.1 Initial System Setup

The first time you power on the device, you will be prompted to select your country. Use the remote control to navigate and press 'OK' to confirm your selection. After this, the system will typically initiate a channel scan.

4.2 Channel Search

To search for available channels:

  1. Press the 'MENU' button on your remote control.
  2. Navigate to the 'Channel Search' option.
  3. Select 'Auto Search' and press 'OK'. The device will scan for all available terrestrial (DVB-T/T2) and cable (DVB-C) channels in your area.
  4. Once the scan is complete, the channels will be saved automatically.

4.3 IPTV Usage

To use IPTV functionality:

  1. Ensure the USB WiFi Receiver is plugged into the TV Box and connected to the internet.
  2. Obtain your local M3U Program Source Files (IPTV playlist).
  3. Transfer these M3U files to a USB flash drive.
  4. Plug the USB flash drive into the TV Box's USB port.
  5. Navigate to the IPTV section in the TV Box menu and import the M3U files from your USB drive.

4.4 Media Playback (USB)

The TV Box supports playback of media files (AVI, MP4, H.265 video; MP3 audio) from a USB storage device. Simply plug your USB drive into the USB port and navigate to the media player section in the menu to browse and play your files.

4.5 Menu Language

The menu language can be set to English, French, Russian, Vietnamese, Thai, Czech, Indonesian, Polish, or Persian. If your preferred language is not available, please use English. Note that this only affects the menu interface; the audio/video content will play in its original language.

Remote control for the DVB T2 TV Box
Figure 4: Remote control for navigating the TV Box menu and functions.

5. User Tips

  • For optimal viewing experience, use an HDMI cable to connect the TV Box to your television, as it provides better quality than the AV cable.
  • Always ensure a strong antenna signal for stable channel reception. Experiment with antenna placement if you experience signal drops.
  • If using YouTube or IPTV, confirm your USB WiFi Receiver is properly connected and has a stable internet connection.
  • Remember that the device does not translate audio. Content will be played in its original broadcast language.

6. Troubleshooting

ProblemPossible CauseSolution
No Signal / Blank ScreenAntenna not connected or poor signal; incorrect TV input selected.Ensure antenna is securely connected to "RF IN". Check antenna position. Verify your TV is on the correct HDMI or AV input. Perform a channel scan.
No Sound (especially with certain channels/files)The device does NOT support AC3 (Dolby Digital) audio decoding.If the audio source is AC3, you will not hear sound. This is a limitation of the device. Try other channels or media files with supported audio formats (MPEG-1/2 Layer I/II/III).
YouTube/IPTV not workingWiFi Receiver not connected or no internet access.Ensure the USB WiFi Receiver is plugged in and connected to a stable internet network. Check your router and internet connection.
Remote control not respondingBatteries are low or incorrectly inserted; obstruction between remote and TV Box.Replace batteries. Ensure line of sight between remote and the TV Box's IR sensor.
Image showing H.265 HEVC support and AC3 Audio Decoder not supported
Figure 5: Important note regarding AC3 audio support.

7. Specifications

FeatureDetail
Model120
CPUMontage MT2203
TunerTC6800
System ComplianceDVB-T/T2/C
Video DecodingHEVC H.265 10-Bit, H.264, H.263, MPEG-4, MPEG-2, AVS, AVS+, VC1
Audio DecodingMPEG-1/2 Layer I/II/III (Does NOT support AC3 Dolby Digital)
USB VersionV2.0
HDMI Version1.4A
Voltage100-240V
FrequencyVHF 174~230MHZ, UHF 470~862MHZ
Signal InputIEC-TYPE Female
Video Output480i/480p/576p/576i/720p/1080p/1080i (Max HD 1080i, NOT 4K)
Supported FeaturesUSB WiFi Receiver (Ralink RT5370), Megogo, Youtube, IPTV, PVR, EPG
Running Memory512MB
Hard Disk TypeBuilt-in flash memory
Hard Disk Capacity512mb
Interface TypeAV, HDMI, USB, RF IN
Dimensions (L*W*H)92*80*30mm
Product Weight0.28KG

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact the retailer/seller directly. Keep your purchase receipt as proof of purchase.


HD-120 DVB-T2 Digital Terrestrial Receiver Setup & Feature Demonstration with H.265 HEVC Support

HD-120 DVB-T2 Digital Terrestrial Receiver Setup & Feature Demonstration with H.265 HEVC Support

0:45 • 640×360 • setup

Related Documents - HD-120

Preview August DVB-T210 USB TV Receiver - Instrukcja Obsługi i Instalacji
Kompleksowa instrukcja obsługi i instalacji odbiornika telewizyjnego August DVB-T210 USB Freeview (HD) z oprogramowaniem NextPVR. Dowiedz się, jak podłączyć, zainstalować i używać urządzenie do odbioru cyfrowej telewizji naziemnej.
Preview Savio DT-DV02 HD Digital Terrestrial Receiver DVB-T/DVB-T2 User Manual
User manual for the Savio DT-DV02 HD Digital Terrestrial Receiver DVB-T/DVB-T2. Includes setup, operation, features, troubleshooting, and safety information.
Preview Satlink ST-5150 HD: Combo Satellite Meter TV Finder - Technical Specifications and Overview
Comprehensive overview and technical specifications for the Satlink ST-5150 HD, a handheld combo meter for DVB-S/S2, DVB-T/T2, and DVB-C satellite and terrestrial TV signal installation and verification.
Preview DYON SMART 43 XT V2 Quick Guide - Setup and Operation
Concise setup and operation guide for the DYON SMART 43 XT V2 television. Covers initial connection, setup wizard, remote control functions, and support information.
Preview GTMEDIA V8X Satellite Receiver User Manual
Comprehensive user manual for the GTMEDIA V8X satellite receiver, covering setup, features, remote control operation, safety guidelines, and troubleshooting.
Preview August DVB-T210 USB Freeview HD TV Receiver User Manual
Comprehensive user manual for the August DVB-T210 USB Freeview (HD) TV Receiver, detailing installation, features, system requirements, troubleshooting, and warranty information.