ELEGOO MERCURY XS BUNDLE

Contents

ELEGOO MERCURY XS BUNDLE Wash and Cure Machine User Manual

For Large Resin 3D Prints, Compatible with SATURN 3 ULTRA

1. Introduction

Thank you for purchasing ELEGOO brand products. This manual provides essential information for the safe and efficient operation of your Mercury XS Bundle Wash and Cure machine. Please read it thoroughly before use.

1.1 Safety Notices

  • Keep the Mercury XS Bundle and its accessories out of the reach of children.
  • Place the machine in a dry environment and protect it from rain and moisture.
  • In case of an emergency, immediately turn off the power supply.
  • Use the machine indoors and avoid direct sunlight and a dusty environment.
  • When operating the machine, wear a mask and gloves to avoid direct skin contact with photopolymer resin and cleaning solutions.
  • Use 95% (or higher) ethyl alcohol or isopropyl alcohol to wash your model unless using water washable resin.
  • Do not disassemble or modify ELEGOO products yourself; this will void the warranty.

Note: Each product undergoes strict quality checks before leaving the factory. Slight cosmetic variations upon receipt are normal.

2. Packing List

Please verify that all items are present and in good condition upon unpacking.

ELEGOO Mercury XS Bundle Wash and Cure Machine

Image: The ELEGOO Mercury XS Bundle, showing the separate washing and curing stations.

  • Curing Machine Body
  • Curing Light
  • Curing Turntable
  • Anti-UV Lid
  • Washing Machine Body
  • Cleaning Bucket
  • Cleaning Basket
  • Cleaning Basket Bracket
  • Adapter
  • User Manual (PDF available at this link)
  • Tools

3. Product Features

The ELEGOO Mercury XS Bundle offers a comprehensive solution for post-processing resin 3D prints, combining washing and curing functionalities in two separate stations.

3.1 360° All-Round Exposure for Thorough Curing

The post-curing station is equipped with two L-shaped light bars, each containing 14 UV LED lights. Additionally, four UV LED beads are integrated beneath the 360° auto-rotating turntable. This design, combined with a Fresnel lens, ensures uniform 405nm UV light exposure from all angles, curing models thoroughly without dead ends. A handheld UV lamp is also included for curing hard-to-reach interiors or intricate details, resulting in smoother surfaces and enhanced print quality.

Curing station with L-shaped light bars, turntable LEDs, and handheld UV lamp

Image: The curing station showing two L-shaped UV light bars, four UV LEDs under the rotating turntable, and a handheld UV lamp for detailed curing.

Diagram of UV curing process with 405nm UV lamps and rotatable platform

Image: Diagram illustrating the "Faster and Evenly Cure" feature with 405nm UV lamps (14PCS+14PCS+4PCS) and a 360° rotating curing platform for complete exposure.

3.2 Dual Functionality: Washing and Curing

The Mercury XS Bundle comprises a dedicated washing station and a post-curing station, allowing for separate and simultaneous cleaning and curing operations. This dual functionality streamlines the post-processing workflow, effectively removing uncured resin from 3D printed models and optimizing print quality.

Separate washing and curing stations with a double-connected adapter

Image: The separate washing and curing stations operating simultaneously, connected by a double adapter.

3.3 Large Washing Volume

The washing station features a 7000ml (7.5 liter) sealed water container, enabling the cleaning of large models printed by machines like the ELEGOO Saturn and Mars 3, or batch cleaning of multiple smaller parts. The container is designed with rubber sealing tape and a powerful turbine blade to effectively remove excess resin and prevent liquid splashing and volatilization.

Two cleaning methods are supported:

  • Basket Washing: Remove the model from the build plate and place it into the cleaning basket for washing.
  • Suspension Washing: Directly hang the printing platform with the model on the cleaning rack for washing.
Washing station with cleaning basket and turbine blade

Image: Close-up of the washing station showing the cleaning basket with models submerged in cleaning solution, and the turbine blade for powerful rinsing.

3.4 Easy and Intuitive Operation

Both stations are operated via a single knob. Press and hold the knob for three seconds to power on the machine. Rotate the knob to set the desired washing or curing time (up to 30 minutes). The clear interface simplifies operation.

Control knob with digital display for wash and cure functions

Image: Close-up of the control knob with a digital display showing "00:00" and icons for Wash, Cure, TFT LCD screen, and Safe Design.

User interacting with the control knob to set time

Image: A hand rotating the control knob to adjust the timer, demonstrating convenient and safe operation.

3.5 UV Protection Cover

The transparent cover of the curing machine blocks up to 99.9% of ultraviolet rays, enhancing resin solidification and protecting your eyesight during the curing process. A safety feature automatically switches off the UV lights when the cover is removed.

Anti-UV shade hood on curing station

Image: The curing station with its yellow transparent anti-UV shade hood, highlighting its ability to block UV rays and automatically stop operation when removed.

4. Specifications

4.1 General Product Information

  • Brand Name: ELEGOO
  • Origin: Mainland China
  • CE Certification: Yes
  • Interface Type: USB (for handheld UV lamp)
  • Power Requirements: 100-240V 50/60 Hz 24V6A (via adapter)

4.2 Mercury XS Bundle Dimensions

Dimensions of the Mercury XS Bundle washing and curing stations

Image: Detailed dimensions for both the curing station (230mm/9.05in x 246mm/9.68in x 363.5mm/14.31in, Max Curing Size: 200mm*260mm, 195mm/7.67in turntable) and the washing station (183mm/7.2in x 148mm/5.82in x 248mm/9.76in, bucket: 255mm/10.03in x 155mm/6.1in x 385.5mm/15.17in).

  • Washing Station Capacity: 7000ml (7.5 liters)
  • Maximum Curing Size: 200mm x 260mm

5. Setup

5.1 Unpacking and Inspection

Carefully unpack all components listed in the packing list. Inspect each item for any signs of damage. If any components are damaged or missing, please contact ELEGOO support immediately.

5.2 Placement

Place the washing and curing stations on a stable, level surface in a dry, well-ventilated area, away from direct sunlight and dust. Ensure there is enough space around the machines for safe operation and maintenance.

5.3 Connecting Power

Connect the provided adapter to both the washing and curing stations using the double-connected adapter. Plug the adapter into a suitable power outlet. The machine is designed to operate with 100-240V AC power.

5.4 Initial Assembly (if required)

Some components, such as the curing lights, may require minor assembly. Use the provided tools (including a hex key if necessary) to secure any parts as indicated in the quick start guide or visual instructions. Ensure all connections are firm and stable.

5.5 Preparing for Operation

  • For washing: Fill the cleaning bucket with the appropriate cleaning solution (e.g., 95% or higher isopropyl alcohol). Do not overfill.
  • For curing: Ensure the curing turntable is correctly placed in the curing station.

6. Operating Instructions

6.1 General Operation Guidelines

  • After a model is printed, clean and blow-dry it thoroughly before placing it in the wash or cure machine.
  • If a model appears yellow after curing, reduce the curing time. Over-curing can lead to discoloration.
  • The recommended ambient temperature for operation is 0-40°C, and ambient humidity is 20%-50%.
  • To prevent overheating, do not operate the machine for more than 40 minutes continuously.

6.2 Washing Function

  1. Fill the cleaning bucket with the appropriate cleaning solution (e.g., 95% or higher ethyl alcohol/isopropyl alcohol).
  2. Choose your cleaning method:
    • Basket Washing: Remove the model from the build plate and place it into the cleaning basket, then lower the basket into the bucket.
    • Suspension Washing: Directly hang the printing platform with the model on the cleaning rack, then lower it into the bucket.
  3. Secure the lid onto the cleaning bucket.
  4. Press and hold the knob on the washing station for 3 seconds to turn it on.
  5. Rotate the knob to set the desired washing time (adjustable up to 30 minutes).
  6. The machine will automatically begin the powerful rinse cycle.
  7. Once the cycle is complete, remove the model(s) and allow them to dry thoroughly.

Special Note: The washing function is not ideal for 3D models printed with water-washable resin; these are best washed with running water.

6.3 Curing Function

  1. Place the cleaned and dried model on the curing turntable.
  2. Place the Anti-UV Lid securely over the curing station.
  3. Press and hold the knob on the curing station for 3 seconds to turn it on.
  4. Rotate the knob to set the desired curing time (adjustable up to 30 minutes).
  5. The UV lights will activate, and the turntable will rotate for 360° all-round curing.
  6. For intricate areas or hard-to-reach spots, use the handheld UV lamp to ensure complete curing.
  7. Once the curing cycle is complete, the UV lights will turn off. Remove the cured model.

Cure Time Recommendation: For models with a diameter less than 30 mm, a curing time of 2 minutes is recommended. For models with complex surface structures, increase the curing time appropriately.

Video: An overview of the ELEGOO Mercury XS Bundle Washing and Curing Machine, demonstrating its dual functionality and ease of use.

7. Maintenance

  • Do not use sharp or pointy tools to scrape the inside of the cleaning bucket or the curing platform to avoid damage.
  • Regularly clean the cleaning bucket, cleaning basket, and curing turntable after use to prevent resin buildup.
  • Before each use, visually inspect the machine's exterior and all accessible parts for any obvious damage or defects.
  • Maintain the recommended ambient temperature of 0-40°C and humidity of 20%-50% in the operating environment.
  • To prevent overheating, avoid continuous operation for more than 40 minutes. Allow the machine to cool down between extended uses.
  • If the machine will not be used for an extended period, empty and clean the cleaning bucket. Store the machine in a dry, cool place.
  • Ensure the Anti-UV Lid is clean and free from obstructions to maintain its UV blocking effectiveness.

8. Troubleshooting

8.1 Common Issues and Solutions

  • Model turns yellow after curing:
    • This usually indicates over-curing. Reduce the curing time in subsequent operations.
  • Washing function seems ineffective:
    • Ensure you are using 95% (or higher) ethyl alcohol or isopropyl alcohol.
    • If using water-washable resin, the machine's washing function may not be optimal; consider washing under running water instead.
    • Check that the turbine blade is rotating correctly and not obstructed.
  • Curing lights not activating or turntable not rotating:
    • Ensure the Anti-UV Lid is correctly placed. The machine has a safety switch that prevents operation if the lid is not properly seated.
    • Check that the power adapter is securely connected to both the machine and the power outlet.
    • Verify that the timer has been set correctly.
  • Machine not turning on:
    • Ensure the power adapter is fully plugged into both the machine and the wall outlet.
    • Confirm that the power outlet is functional.
    • Press and hold the control knob for at least 3 seconds to power on.

9. User Tips

  • The Mercury XS Bundle is compatible with ELEGOO Mars 3 Pro and Saturn 2 3D Printers. When washing models from a Saturn 2, remember to remove the build plate's handle before placing it in the washing station.
  • The machine's power supply is designed to be universal (100-240V), making it compatible with various international power standards without needing a voltage converter.
  • While the product is generally well-packaged, always perform a thorough inspection for any transit damage upon arrival.
  • Some users have noted that a hex key might be needed for initial assembly steps, such as attaching the curing lamps. Ensure you have one available if needed.
  • The separate design of the washing and curing stations, along with the dual power adapter, allows for efficient simultaneous post-processing.

10. Warranty and Support

10.1 Warranty Statement

ELEGOO products, including the Mercury XS Bundle, are covered by a warranty starting from the date of receipt. Warranty periods for different components may vary. For detailed information regarding your specific product's warranty, please visit our official website at https://www.elegoo.com/pages/refund-policy.

The free warranty does NOT cover problems caused by self-disassembly, improper use, or normal wear and tear of the machine housing.

10.2 Contact Information

Should you encounter any issues or require technical assistance, please contact ELEGOO support:

  • Telephone: 0755-21005141
  • Mailbox: 3dp@elegoo.com
  • Website: www.elegoo.com
  • Address: 101, No.30 Dahe Industrial Park, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.