AIKE AK2630S Automatic High-Speed Hand Dryer

1. Product Overview

The AIKE AK2630S is a wall-mounted, automatic high-speed hand dryer designed for commercial, hotel, and household use. It features smart sensor technology, fast drying capabilities, and an eco-friendly design.

2. Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Ensure the power supply matches the product's rated voltage (AC110-130V / 220-240V).
• Installation should be performed by qualified personnel, especially for hard-wired connections.
• Do not obstruct the air inlet or outlet during operation.
• Keep hands and foreign objects away from the air outlet during operation.
• This appliance is designed for drying hands only.

3. Installation Guide

The AIKE AK2630S hand dryer is designed for wall mounting. It comes with a power cord for plug-in installation, or it can be hard-wired by a professional electrician.

3.1 Package Contents

• AIKE AK2630S Hand Dryer Unit
• Mounting Hardware (screws, anchors)
• Power Cord (approx. 47.24 inches / 1.2 meters)
• Instruction Manual

3.2 Mounting Steps

1. Choose Location: Select a suitable wall location in your bathroom or washroom, ensuring adequate space around the unit for operation and maintenance.
2. Mark Drilling Points: Use the mounting template (if provided, or measure from the unit) to mark the drilling points on the wall.
3. Drill Holes: Drill holes at the marked points and insert wall anchors.
4. Secure Mounting Plate (if applicable): If your model includes a separate mounting plate, secure it to the wall using the provided screws.
5. Attach Hand Dryer: Carefully align the hand dryer with the mounting plate or drilled holes and secure it with the remaining screws.
6. Power Connection:
   
   • Plug-in Installation: Plug the power cord into a suitable electrical outlet.
   • Hard-wired Installation: If hard-wiring is required, it must be operated by a qualified electrician. The power cord cannot be removed directly for this purpose.
7. Test Unit: Once securely mounted and powered, test the unit by placing hands under the sensor area.

3.3 Installation Video

4. Operating Instructions

The AIKE AK2630S hand dryer operates automatically using a smart sensor.

4.1 Basic Operation

1. Ensure the hand dryer is properly installed and connected to a power source.
2. Wash your hands thoroughly.
3. Place your wet hands under the air outlet of the hand dryer. The sensor will detect your hands within a sensing distance of 15-20 cm.
4. The hand dryer will automatically activate, blowing high-speed air to dry your hands.
5. Move your hands gently to ensure all surfaces are dried. The drying time is typically 10-15 seconds.
6. Once your hands are dry, remove them from the sensor area. The hand dryer will automatically turn off.

4.2 Smart Warm Wind Feature

The hand dryer is equipped with a smart warm wind function. When the ambient temperature is below 25°C (77°F), the unit will automatically provide warm air for increased comfort. Above 25°C, it will dispense cold air.

4.3 Jet Air-Wiper Technology

The concentrated air stream acts like an air-wiper, quickly and efficiently scraping away water from your hands, ensuring a thorough dry.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your AIKE AK2630S hand dryer.

5.1 Cleaning the Exterior

• Wipe the exterior surface with a soft, damp cloth and mild soap.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the ABS Polycarbonate construction.
• Ensure the unit is unplugged or power is turned off before cleaning.

5.2 Filter Maintenance

The unit incorporates a built-in eco-friendly filter for germ-free air. While specific instructions for filter cleaning/replacement are not provided, it is recommended to periodically inspect the air intake area for dust and debris. If the filter appears clogged or dirty, gently clean it or consult the manufacturer for replacement options to maintain air quality and performance.

6. Troubleshooting

If you encounter issues with your AIKE AK2630S hand dryer, please refer to the following common solutions:

• No Power: Check if the power cord is securely plugged into the outlet. If hard-wired, ensure the circuit breaker is not tripped.
• Unit Not Activating: Ensure there are no obstructions blocking the sensor. The sensor is designed to be sensitive and activate when hands are within 15-20 cm.
• Weak Airflow: Check the air intake for any dust or debris accumulation. A clogged filter or intake can reduce airflow.
• Unusual Noise: If the unit makes unusual noises, turn it off immediately and contact customer support.

For persistent issues or problems not listed here, please contact AIKE customer support.

7. Specifications

8. Warranty and Support

AIKE offers a 2-year worry-free replacement guarantee for the AK2630S hand dryer. In case of non-human damage, AIKE will provide new parts and service for free.

For warranty claims, technical support, or any inquiries, please contact your seller or the AIKE manufacturer directly with your purchase details.

9. User Tips

• The sensor is highly sensitive; ensure hands are placed directly under the air outlet for immediate activation and removed promptly once dry to conserve energy.
• The hand dryer provides strong wind for quick drying, making it an efficient alternative to paper towels and contributing to cost savings and reduced carbon emissions.
• Installation is generally straightforward, especially for plug-in models, and can be completed in about 10 minutes.
• The unit's compact size and strong airflow make it suitable for various settings, from small businesses to commercial restrooms.