Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your AIKE Commercial Jet Hand Dryer, Model AK2005H. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Ensure proper grounding and electrical installation by a qualified professional. All wiring must comply with local electrical codes.
- Do not operate the hand dryer with wet hands on the power cord or plug.
- Keep children away from the device during operation.
- Do not cover the air inlets or outlets during operation.
- Disconnect power before performing any maintenance or cleaning.
Product Features
- Powerful 1750-2050W commercial jet hand dryer.
- Achieves fast drying in 7-10 seconds.
- Equipped with a built-in two-stage HEPA filter that captures 99.97% of dust and allergens.
- Constructed with an extremely durable, impact-resistant ABS polycarbonate cover.
- Features smart warm wind technology and two options for air velocity.
- Intelligent LED display shows drying time countdown and error codes.
- Includes safety features such as overheat protection, timeout protection, and Smartwarm functionality.
- Designed with dual air outlets for efficient drying.
- Integrated drain tank to collect excess water.
- Features a hidden switch for internal settings.
- Hardwired friendly design for easy electrical connection.
Package Contents
- AIKE Commercial Jet Hand Dryer Unit
- Mounting Plate
- Installation Hardware (screws, expansion tubes)
- Instruction Manual
Setup and Installation
Professional installation is recommended for this hardwired unit.
- Prepare for Mounting: Unscrew the screw at the bottom of the hand dryer unit and carefully remove the mounting plate.
- Mark Positions: Hold the mounting plate against the desired wall location. Use a pencil to mark the positions for drilling holes.
- Drill Holes: Use an appropriate drill bit to make holes at the marked positions. Insert the provided expansion tubes into the drilled holes.
- Secure Mounting Plate: Fix the mounting plate to the wall using the provided screws, ensuring it is level and securely fastened.
- Electrical Connection (Hardwired Friendly): The unit is designed for hardwiring. Access the connector panel (often behind a hidden switch or cover). Connect the Live (L), Neutral (N), and Ground (H) wires from your electrical supply to the corresponding terminals on the hand dryer. Ensure all connections are tight and secure according to local electrical codes.
- Mount the Unit: Carefully align the holes on the back of the hand dryer unit with the mounting plate. Hang the machine onto the plate.
- Final Securement: Screw back the bottom screw to fully secure the hand dryer to the mounting plate. The installation is now complete.
Operating Instructions
The AIKE Commercial Jet Hand Dryer is designed for automatic, touch-free operation.
- Wash Hands: Thoroughly wash your hands with soap and water.
- Activate Dryer: Place your wet hands into the drying chamber. The built-in sensor will automatically detect your hands and activate the high-speed air flow.
- Dry Hands: Move your hands gently up and down within the drying chamber to ensure all surfaces are exposed to the air. The intelligent LED display on top of the unit will show a countdown of the remaining drying time (typically 7-10 seconds).
- Completion: Once your hands are dry, remove them from the chamber. The dryer will automatically shut off.
Maintenance
Regular maintenance ensures optimal performance and longevity of your hand dryer.
- Exterior Cleaning: Clean the exterior surface of the hand dryer regularly with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS polycarbonate cover.
- Drain Tank Maintenance: The hand dryer is equipped with an internal drain tank to collect excess water. Periodically check the drain tank and empty it to prevent water overflow and maintain hygiene. The drain tank is typically located at the bottom of the unit (refer to Figure 3).
- HEPA Filter Inspection: The two-stage HEPA filter is crucial for air quality. Inspect the filter regularly for dust and debris buildup. Clean or replace the filter as needed to ensure efficient air filtration and drying performance. Access to the filter may be behind the hidden switch panel (refer to Figure 4).
- Sensor Cleaning: Keep the sensor area clean and free from obstructions to ensure proper automatic activation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer not turning on | No power supply; Hands not detected by sensor | Check electrical connections and circuit breaker. Ensure hands are placed correctly in the sensor area. |
| Weak airflow | Air inlets/outlets obstructed; Clogged HEPA filter | Clear any obstructions. Inspect and clean/replace the HEPA filter. |
| Unusual noise during operation | Internal component issue; Loose parts | If persistent, disconnect power and contact AIKE customer support. |
| Error code displayed on LED | System malfunction; Specific error condition | Note the error code and consult AIKE customer support for specific guidance. |
| Water overflowing from unit | Full drain tank | Empty the drain tank. Increase frequency of drain tank checks. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | AK2005H |
| Brand Name | AIKE |
| Origin | Mainland China |
| Power (W) | 1750 |
| Rated Power | 1750-2050W |
| Voltage | AC100-130V / AC220-240V (110/220V) |
| Motor Type | Brush motor |
| Motor Power | 750W |
| Case Material | ABS Plastic |
| Drying Time | 7-10 seconds |
| Air Speed | 90m/s |
| Air Temperature | 20-40℃ |
| Application | Hotel, Commercial, Household |
| Dimensions | 300x220x685mm |
| Net Weight | Approx. 8.5kg |
| Protection Class | Class II |
| Waterproof Rating | IP24 |
| Sensor | Yes |
| Certification | CB, CE, RoHS |
Warranty and Support
AIKE provides a 2-year worry-free replacement guarantee for this product. In the event of non-human damage, AIKE will supply new parts and service free of charge.
For any support inquiries, troubleshooting assistance, or warranty claims, please contact AIKE customer service directly.
User Tips
- For optimal drying results, shake off excess water from your hands before placing them into the dryer.
- Ensure the sensor area is kept clean and unobstructed to guarantee immediate and consistent activation.
- Regularly check and empty the drain tank to prevent water accumulation and maintain a hygienic environment.
