1. Introduction
The LEKATO WS-70 is a compact wireless guitar system designed for use with 6.35mm audio devices. It utilizes advanced UHF digital transmission technology to provide strong anti-interference capabilities, ensuring no lag or signal loss. This system supports up to 70 channels simultaneously, allowing one transmitter to connect to multiple receivers without interference, making it ideal for various musical instruments and live performances.
2. Setup Instructions
- Charging the Units:
Before first use, ensure both the transmitter and receiver are fully charged. Use the included dual-ended USB cable to charge both units simultaneously. The units are fully charged when four green lights remain illuminated.
Both units can be charged simultaneously using the included dual-ended USB cable.
Four green lights indicate a full charge, providing over 6 hours of playing time. - Connecting the Transmitter:
Plug the transmitter unit into the output jack of your electric guitar, bass, or other compatible instrument. The 190° rotatable plug allows for flexible positioning.
The 190° rotatable plug allows for flexible positioning on various instruments. - Connecting the Receiver:
Plug the receiver unit into the input jack of your amplifier, mixer, or other audio device.
Simple plug-and-play connection to your electric guitar and amplifier. - Pairing (Plug and Play):
The WS-70 system is designed for plug-and-play operation and is typically pre-set before delivery. Simply long-press the signal key on both the transmitter and receiver simultaneously to match them. No other complex operations are required.
3. Operating Instructions
- Power On/Off: Press and hold the power button on each unit to turn them on or off.
- Channel Selection: The WS-70 supports 70 channels. If you experience interference, you can try resetting the code by long-pressing the signal key on both units again to find a clear channel.
- Multi-Receiver Connection: One transmitter can connect to up to four receivers simultaneously without interference. This is useful for multiple amplifiers or monitoring setups.
One transmitter can connect to up to four receivers simultaneously, supporting up to 70 channels. - Latency and Range: The system offers less than 3ms latency for real-time audio transmission and an effective transmission range of approximately 25-40 meters (80-131 feet).
- Cable-Free Performance: Enjoy the freedom of movement without the constraints of cables.
Enjoy freedom of movement with a wireless connection, eliminating cable clutter.
4. Maintenance
- Charging: Recharge the built-in lithium battery using the provided dual-ended USB cable. A full charge provides over 4.5 hours of working time (circumstantial).
- Cleaning: Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge regularly.
5. Troubleshooting
- No Sound / Signal Loss:
- Ensure both transmitter and receiver are powered on and fully charged. Check that they are properly paired (long-press the signal key on both units). Verify that the instrument and amplifier cables are securely connected. If the blue indicator is flickering, it indicates they are not paired or there is strong signal interference. Try resetting the code to find a clear channel.
- Interference / Noise:
- The system uses UHF technology with strong anti-interference capabilities. However, if you experience noise, try changing the channel by re-pairing the units. Ensure there are no other strong wireless signals or electronic devices operating nearby on the same frequency band. Keep the distance between the transmitter and receiver within the effective range (25-40m).
- Whistling Sound (Feedback):
- When using, do not point the instrument directly at the speaker. Maintain a distance of at least 1.5 meters between the instrument and the speaker. If whistling occurs, try turning down the volume on your amplifier.
- Unit Not Powering On:
- Ensure the unit is fully charged. If it still doesn't power on, switch it off and recharge it for 1-2 hours before attempting to use it again.
6. Specifications (WS-70)
| Feature | Specification |
|---|---|
| Material | ABS plastic |
| Signal-to-noise ratio | >86db |
| Latency | <3 ms |
| Frequency response | 20-20KHz |
| Transmission distance | 25-40m (80-131 Feet) |
| Full working hours | >4.5 hours (circumstantial) |
| Suitable For | Guitars (electric, bass, electric-acoustic) and other electric music instruments |
| Distortion | <0.05% |
| Channel | 70 channels |
| Dimensions | 9.2cm (3.6in) x 11.6cm (4.5in) x 3.5cm (1.3in) |
| Weight | 200g (approximate, for the pair) |
7. User Tips
- Maximize Battery Life: To ensure you have enough power for your performance, always fully charge both units before use. Consider carrying a portable power bank for extended sessions, especially since the WS-70 offers over 4.5 hours of operation.
- Optimal Placement: While the system offers a good range, for the most stable connection and to minimize potential interference, try to keep a clear line of sight between the transmitter and receiver, and avoid placing them directly next to other strong electronic devices.
- Check Compatibility: The WS-70 is compatible with most electric guitars, basses, and electric-acoustic guitars with a 6.35mm output jack. Ensure your instrument's jack is compatible with the rotatable plug design.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official LEKATO website or contact your retailer. Keep your proof of purchase for any warranty claims.