1. Product Overview
The AODELAN ZC-1 Camcorder Zoom Controller is a wired remote control designed to provide precise record and zoom control for compatible camcorders. It features a pressure-sensitive rocker switch for variable zoom speeds and a dedicated record button. The controller attaches securely to a tripod handle, eliminating camera shake caused by direct camcorder contact.
2. Package Contents
Ensure all items are present in your package:
- ZC-1 Camcorder Zoom Controller x 1
- Remote Cord (2.5mm–2.5mm plug) x 1
- Adapter Cable (2.5mm Female - Sony AVR) x 1
- User Manual (this document)
3. Setup and Installation
Follow these steps to set up your ZC-1 Camcorder Zoom Controller:
- Attach to Tripod Handle: Securely attach the ZC-1 controller to the pan handle of your tripod using the integrated clamp. Tighten the clamp knob until it is firm. The clamp has an adjustable range of up to 1.38 inches and features non-slip rubber pads for a secure grip.
- Connect Remote Cord to Controller: Insert one end of the provided 2.5mm remote cord into the LANC jack on the ZC-1 controller.
- Connect Remote Cord to Camcorder: Insert the other end of the remote cord into the LANC or Remote (2.5mm) terminal on your camcorder. For Sony camcorders featuring an A/VR port, use the included 2.5mm Female - Sony AVR adapter cable.
- Set S/P Change Over Switch: Locate the S/P switch on the side of the controller. Slide the switch to 'S' for Sony or Canon camcorders, or to 'P' for Panasonic camcorders. Ensure this setting matches your camcorder brand for proper functionality.
4. Operating Instructions
The ZC-1 controller provides intuitive control over your camcorder's zoom and recording functions:
- Zoom Control: The zoom lever is pressure-sensitive.
- Gently press the 'W' side for a slow, wide-angle zoom (zoom out).
- Hard press the 'W' side for a fast, wide-angle zoom (zoom out).
- Gently press the 'T' side for a slow, telephoto zoom (zoom in).
- Hard press the 'T' side for a fast, telephoto zoom (zoom in).
- Record Start/Stop: Press the red 'REC' button once to start recording. Press it again to stop recording.
5. Maintenance
To ensure the longevity and optimal performance of your AODELAN ZC-1 Camcorder Zoom Controller:
- Keep the device dry. Do not expose it to moisture or rain.
- Clean the exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
6. Troubleshooting
If you encounter issues with your ZC-1 controller, try the following:
- Controller not responding:
- Ensure the remote cord is securely connected to both the controller and the camcorder.
- Verify that the S/P Change Over Switch is set correctly for your camcorder brand (S for Sony/Canon, P for Panasonic).
- Check your camcorder's settings to ensure the remote control function is enabled, if applicable.
- Zoom function not working as expected:
- Confirm the S/P switch setting.
- Test the pressure sensitivity of the zoom lever by applying varying degrees of pressure.
- Recording not starting/stopping:
- Ensure the camcorder is in recording standby mode.
- Check the remote cord connection.
If problems persist, refer to your camcorder's manual or contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ZC-1 |
| Type | Wired Remote Control |
| Port | LANC jack (2.5mm) |
| Dimensions | Approx. 86 x 55 x 92mm (3.4 x 2.2 x 3.6 in.) |
| Weight | Approx. 102g (3.6 oz) (without remote cord) |
| Compatible Brands | Sony, Canon, Panasonic (with LANC/Remote 2.5mm ports) |
| Certification | FCC, CE |
| Origin | Mainland China |
Compatible Camera Models:
8. User Tips
- Verify Compatibility: Always double-check the detailed compatibility list (Figure 9) to ensure your specific camcorder model is supported, especially for Canon XF605 or similar models.
- Smooth Zoom Transitions: Practice with the pressure-sensitive zoom lever to achieve desired slow or fast zoom transitions for professional-looking footage.
- Secure Attachment: Ensure the controller is firmly attached to the tripod handle to prevent any movement during operation, which could affect shot stability.
9. Warranty and Support
The AODELAN ZC-1 Camcorder Zoom Controller comes with a 12-month warranty from the date of purchase. If you have any questions regarding the use, setup, or troubleshooting of this product, please do not hesitate to contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.
