1. Introduction
The AUTOOL EM365 is a high-performance 3-in-1 professional tool designed for automotive workshops, car electricians, and dealerships. It functions as an Inverter Programming Power Supply, a 12V Battery Charger, and a Car Jump Starter. This versatile device provides a stable power supply for vehicles during ECU programming, assists in recovering and fast charging batteries, and can jump-start 12V car batteries. It also serves as a reliable power source for general car service and debugging operations.
Figure 1: AUTOOL EM365 Inverter Programming Power Supply
2. Safety Information
Please read and understand all safety instructions before using the AUTOOL EM365. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure proper ventilation when operating the device.
- Connect the battery clamps correctly: red wire to positive (+), black wire to negative (-).
- Confirm that the 12V battery has sufficient capacity before use.
- The EM365 programmable power supply is designed to repair good batteries; damaged batteries cannot be repaired.
- If the voltage is abnormal, check for short circuits in the load and battery.
- Keep the device away from water, moisture, and flammable materials.
- Do not disassemble or modify the device. Servicing should only be performed by qualified personnel.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during operation.
3. Product Overview
The AUTOOL EM365 features an intuitive HD LCD screen and user-friendly controls for various functions. It is equipped with high-speed cooling fans for extended operation and an IP21S protection rating for durability.
Figure 2: Front and Rear Panel Layout
Controls and Interfaces:
| Label | Description |
|---|---|
| A | Handle |
| B | Emergency Stop Button |
| C | OK Button |
| D | Right Button |
| E | Left Button |
| F | Return Button |
| G | Stop Button |
| H | HD Color Display |
| I | Output Terminal |
| J | Power Switch |
| K | Power Input Interface |
| L | Cooling Fan |
Key Features:
- CV/CC Charging
- Adjustable Programming Voltage
- Battery Restoration
- Vehicle Emergency Start (Jump Starter)
- Nine Safety Protections (Overcharge, Overheating, Low Voltage, Short Circuit, Reverse Connection, Emergency Stop, No-Load, Output Overcurrent, Output Overvoltage)
- HD LCD Screen for intuitive operation
- High-speed Cooling Fan for stable performance
- IP21S Protection Rating
- 2-meter Pure Copper Cable with fully insulated battery clips
4. Specifications
| Parameter | Value |
|---|---|
| Brand Name | AUTOOL |
| Origin | Mainland China |
| Certification | CE |
| Rated Input Voltage | 110V±15%, 220V±15% |
| Input Frequency | 50Hz/60Hz |
| Rated Input Power | 3.8KVA |
| Charging Current/Voltage | 20A - 12V |
| Starting Current/Voltage | 400A - 12V |
| Maximum Effective Current | 400A |
| Voltage Range of Programming Power Supply | 10.8V - 15V |
| Load Loss | 20W |
| Efficiency | 85% |
| Power Factor | 0.76 |
| Insulation Class | F |
| Enclosure Rating | IP21S |
| Dimensions (L*W*H) | 415mm * 300mm * 230mm |
| Weight | 13.0 kg |
Figure 3: Product Dimensions
5. Setup
Before operating the AUTOOL EM365, ensure it is placed on a stable, flat surface and that all connections are secure.
5.1 Initial Connection
- Connect the power cable to the Power Input Interface (K) on the rear of the device.
- Plug the power cable into a suitable electrical outlet (110V or 220V, depending on your unit).
- Connect the power clamps to the Output Terminal (I) on the front of the device. Ensure a secure connection.
- Turn on the device using the Power Switch (J) on the rear panel.
Video 1: Initial setup and power-on sequence.
6. Operating Modes
The AUTOOL EM365 offers multiple operating modes accessible via the HD LCD screen and control buttons.
6.1 Programming Power Mode
This mode provides a stable voltage source for ECU programming and decoding, ensuring accurate data transmission.
- From the main menu, select 'Programmable Power Supply' using the Left/Right buttons (D, E) and confirm with the OK button (C).
- Connect the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to the negative (-) terminal.
- Choose between 'Adjustable Mode' or 'Fixed Mode'.
- In 'Adjustable Mode', set the desired voltage within the 10.8V to 16V range using the Left/Right buttons (D, E) and confirm with OK (C).
- The device will now provide a stable power supply for your programming tasks.
Figure 4: Programmable Power Supply Mode Interface
Video 2: Demonstrating Programming Power Mode.
6.2 Fast Charging Mode
This mode supports charging various 12V battery types, automatically adjusting voltage and current to optimize charging and prevent overcharging.
- From the main menu, select 'Fast Charging' using the Left/Right buttons (D, E) and confirm with the OK button (C).
- Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal.
- Select the battery type (e.g., Standard Lead-acid, EFB, GEL, AGM Flat Plate, AGM Spiral) from the options.
- The device will automatically detect the battery's status and adjust the charging power. Charging stops when the battery is full.
Figure 5: Fast Charging Mode Operation
Figure 6: Multi-Stage Smart Charging Process
Figure 7: Compatible Battery Types
Video 3: Demonstrating Fast Charging Mode.
6.3 Battery Restoration Mode
This function uses advanced pulse restoration technology to fix battery issues and restore batteries that have been discharged for a long time or suffered severe power loss.
- From the main menu, select 'Battery Restoration' using the Left/Right buttons (D, E) and confirm with the OK button (C).
- Important: The battery must be removed from the vehicle before restoration.
- Connect the red clamp to the positive (+) terminal of the battery and the black clamp to the negative (-) terminal.
- The device will begin the restoration process. Monitor the display for progress.
Figure 8: Battery Restoration Function
Video 4: Demonstrating Battery Restoration Mode.
6.4 Vehicle Display Mode
This mode provides an uninterrupted power supply, automatically restarting during power outages, making it ideal for vehicle demonstrations in showrooms or during battery replacements.
- From the main menu, select 'Vehicle Display Mode' using the Left/Right buttons (D, E) and confirm with the OK button (C).
- Connect the power clamp wires to the vehicle's battery terminals.
- Ensure the battery voltage is within the compatible range (10.8V-16V).
- The device will provide stable power to the vehicle.
Figure 9: Vehicle Display Mode in use
Video 5: Demonstrating Vehicle Display Mode.
6.5 Forced Start Mode (Car Jump Starter)
The EM365 can provide up to 400A of cranking current to jump-start car engines under 5.0T displacement.
- From the main menu, select 'Forced Start' using the Left/Right buttons (D, E) and confirm with the OK button (C).
- Connect the red clamp to the positive (+) terminal of the vehicle's battery and the black clamp to the negative (-) terminal.
- Ensure the starting current is within the compatible range of 400A.
- Start the vehicle engine. The device will provide the necessary cranking current.
Figure 10: Powerful Emergency Start Function
Video 6: Demonstrating Forced Start Mode.
7. Maintenance
- Regularly inspect the power cable and battery clamps for any signs of damage or wear. Replace if necessary.
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ensure the cooling fans (L) are not obstructed to maintain optimal performance and prevent overheating.
- Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
- Do not expose the device to rain or excessive moisture.
8. Troubleshooting
- Device not powering on: Check if the power cable is securely connected and the power switch (J) is in the 'ON' position. Verify the power outlet is functional.
- Abnormal voltage readings: If the voltage is abnormal, immediately check whether the load and battery are short-circuited. Ensure all connections are correct and secure.
- Charging not starting/progressing: Confirm the battery type selection is correct. Ensure the battery clamps are properly connected to the battery terminals. The device can only repair good batteries; damaged batteries cannot be repaired.
- Overheating: Ensure the cooling fans (L) are not blocked and the device has adequate ventilation. If overheating persists, discontinue use and contact support.
- Error messages on LCD: Refer to the user manual for specific error code interpretations. If the issue cannot be resolved, contact AUTOOL customer support.
9. User Tips
- The EM365 is compatible with various battery types, including EFB and AGM batteries, for charging and restoration.
- The system language can be switched to multiple options, including English, French, Spanish, German, and Russian, for user convenience.
- The included power cable is approximately 2 meters long, providing flexibility during use.
- For optimal battery restoration, always remove the battery from the vehicle as instructed by the device.
10. Warranty & Support
AUTOOL provides a Three Years Warranty and lifetime maintenance for the EM365 Inverter Programming Power Supply. For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years from the date of purchase.
For any product-related inquiries, technical assistance, or warranty claims, please contact AUTOOL customer support. Our team is committed to responding within 24 hours to ensure your satisfaction.
Figure 11: AUTOOL 3-Year Warranty
11. Packing List
The AUTOOL EM365 package includes the following items:
- 1 * AUTOOL EM365 Programming Power Supply Main unit
- 1 set of power cable (approx. 2 meters)
- 1 * User Manual
- 1 * Package Box
Figure 12: Package Contents
