Introduction
The SmallRig Carbon Fiber Photography Monopod Tripod 5564 is designed to provide stable support and effortless portability for photographers and videographers. Its lightweight carbon fiber construction and one-touch height adjustment mechanism make it ideal for various shooting environments, especially in confined spaces. This manual provides detailed instructions for the proper setup, operation, and maintenance of your monopod tripod.
Product Overview
The monopod features a 1/4"-20 screw on top for camera attachment and accessory expansion. Its head base is equipped with a double-ended spigot with 1/4"-20 and 3/8"-16 male threads, ensuring broad compatibility. The 360° metal ball head offers superior durability and stability, complemented by premium carbon fiber legs.
Setup
- Unpacking: Carefully remove all components from the packaging. Verify that all items listed in the 'Package Contents' section are present.
-
Extending the Legs: To extend the monopod, release the leg locks on each section. Extend the carbon fiber sections to your desired height. Ensure each section is securely locked using the flip locks before use.
Figure 2: Monopod collapsed (680mm / 26.8in) and extended (1655mm / 65.6in) -
Attaching Your Camera/Device:
- The monopod features a 1/4"-20 screw on top. Attach your camera, ball head, or video head directly to this screw.
- If your equipment requires a 3/8"-16 thread, the head base is equipped with a double-ended spigot that includes both 1/4"-20 and 3/8"-16 male threads.
- For equipment compatible with Arca-Swiss quick release plates, ensure your camera is fitted with one and then secure it into the QR Plate on the monopod's ball head.
Figure 3: Ball Head Components - Leveling: Use the built-in bubble level on the ball head to ensure your setup is perfectly level for precise shots.
Operating Instructions
- One-Touch Height Adjustment: To adjust the monopod's height, simply press the one-touch release mechanism. The monopod will instantly lock at any position, allowing for quick and easy height changes with one hand.
-
Adjusting the Ball Head:
- Quick Release Lock Knob: Use this knob to secure or release the quick release plate, allowing for fast attachment and detachment of your camera.
- Quick Locking Knob: This knob controls the overall movement of the ball head. Loosen it to adjust the camera angle freely, and tighten it to lock the camera in position.
- Pan Lock: The pan lock allows you to control the horizontal rotation of the ball head independently. Loosen to pan smoothly, tighten to lock the panning movement.
- Accessory Attachment: The monopod includes a 1/4"-20 threaded hole with an integrated ARRI 3/8"-16 locating hole. This allows for the attachment of magic arms, monitors, lights, or other accessories to expand your shooting configurations.
Maintenance
- Cleaning: Wipe down the carbon fiber legs and aluminum alloy components with a soft, dry cloth after each use. For stubborn dirt, a slightly damp cloth can be used, followed by thorough drying.
- Environmental Precautions: Avoid using the monopod in sandy or dusty environments. If exposure occurs, clean all moving parts thoroughly to prevent grit from damaging the mechanisms.
- Moisture: If the monopod is exposed to water, ensure all parts are dried thoroughly before storage or subsequent use to prevent corrosion.
- Storage: Store the monopod in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
- Stability Issues: Ensure all leg sections are fully extended and securely locked. Verify that the ball head's quick locking knob and pan lock are tightened after positioning your camera. Always check the bubble level for proper balance.
- Difficulty Adjusting Height: If the one-touch height adjustment mechanism feels stiff, ensure no debris is obstructing the internal components. Clean the leg sections if necessary. Do not force the mechanism.
- Camera Not Secure: Double-check that the quick release plate is correctly seated and the quick release lock knob is fully tightened. Ensure your camera's mounting screw is securely fastened to the plate.
- Load Capacity Concerns: Remember that the head load capacity is 5kg (11lb) and the monopod load capacity is 15kg (33lb). Exceeding these limits can compromise stability and damage the equipment. Load capacity can vary based on attached equipment, lens, accessories, and center of gravity. Always ensure your setup is within these limits.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 5564 |
| Material(s) | Carbon Fiber, Aluminum Alloy, Plastic |
| Product Weight | 1725g / 3.80lb |
| Product Dimensions | 681 × 97 × 82mm / 26.8 × 3.8 × 3.2 in |
| Maximum Height | 166.5cm / 65.6in |
| Storage Length | 68.0cm / 26.8in |
| Head Load Capacity | 5.0kg / 11.0lb |
| Monopod Load Capacity | 15kg / 33lb |
| Maximum Leg Diameter | 36.0mm / 1.4in |
| Sections | 4 |
| Leg Locks | Flip lock |
| Mounting Options | 1/4"-20 & 3/8"-16 double-ended spigot |
| Head Type | Ball Head |
| Package Dimensions | 740.0 x 150.0 x 150.0mm / 29.1 x 5.9 x 5.9in |
| Package Weight | 2400g ± 5.0g / 5.29 lb ± 0.01 lb |
Package Contents
- Monopod x 1
- Allen Wrench x 3
- Carrying Bag x 1
- Guarantee Card x 1
Warranty & Support
SmallRig products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the Guarantee Card included in your package or visit the official SmallRig website. Please retain your proof of purchase for warranty claims.
