1. Introduction
This manual provides essential information for the safe and effective use, installation, and maintenance of your original Dreame T10 Vacuum Cleaner Floor Brush Assembly. Please read all instructions carefully before use.
2. Safety & Warnings
Please observe the following safety precautions to prevent damage to the product or personal injury:
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Product Overview
The Dreame T10 Floor Brush Assembly is a replacement part designed to effectively clean various floor types. It features a soft roller brush for optimal debris collection.

Figure 1: Front view of the Dreame T10 Floor Brush Assembly.

Figure 2: Bottom view showing the soft roller brush and wheels.
4. Setup and Installation
4.1 Before First Use
- Remove all protective films from the device.
4.2 Replacing the Floor Brush Assembly
To replace your existing floor brush assembly with the new one, follow these steps:
- Ensure your Dreame T10 vacuum cleaner is powered off and disconnected from any charging source.
- Locate the release mechanism for the current floor brush assembly on your vacuum cleaner. This usually involves pressing a button or lever.
- Carefully detach the old floor brush assembly from the vacuum cleaner.
- Align the new floor brush assembly with the connection point on your vacuum cleaner.
- Push the new assembly firmly until it clicks into place, ensuring a secure connection.

Figure 3: Side view showing the connector for attachment to the vacuum cleaner.
5. Operating Instructions
Once installed, the floor brush assembly operates as an integral part of your Dreame T10 vacuum cleaner. Refer to your main Dreame T10 vacuum cleaner manual for general operating instructions.
6. Maintenance
Regular maintenance of the floor brush assembly ensures optimal cleaning performance and extends its lifespan.
6.1 Cleaning the Roller Brush
- Ensure the vacuum cleaner is powered off and the floor brush assembly is detached.
- Locate the roller brush release tab or lever on the bottom of the assembly (refer to Figure 4).
- Open the cover or release the tab to remove the soft roller brush.
- Carefully remove any tangled hair, threads, or debris from the roller brush using scissors or a cleaning tool.
- Clean any debris from the brush housing.
- Reinsert the roller brush, ensuring it is properly seated, and close the cover/secure the tab until it clicks.

Figure 4: Angled bottom view illustrating the roller brush release mechanism.
7. Troubleshooting
If you encounter issues with your floor brush assembly, consider the following:
- Brush not spinning: Check if the roller brush is clogged with hair or debris. Remove and clean it as described in the Maintenance section. Ensure it is reinstalled correctly.
- Reduced suction/cleaning performance: This could be due to a heavily clogged roller brush or blockages within the brush head. Perform a thorough cleaning. Also, check the main vacuum cleaner's filter and dustbin.
- Unusual noises: Inspect the roller brush for any foreign objects or damage. Ensure all parts are securely attached.
8. Specifications
| Product Name | Dreame T10 Vacuum Cleaner Floor Brush Assembly |
| Model Number | Dreame T10 |
| Vacuum Part Type | BRUSHES |
| Material | Plastic |
| Batch/Serial Number | 00137AM2100211FD |
9. User Tips
- For households with pets, check and clean the roller brush more frequently to prevent hair from accumulating and affecting performance.
- Always ensure the roller brush is completely dry before reinserting it into the assembly after any wet cleaning.
- If you notice a significant drop in cleaning efficiency even after cleaning, it might be time to consider replacing the roller brush itself or the entire assembly.
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your original Dreame T10 vacuum cleaner or contact the seller directly. You may also find additional information on the official Dreame website.
A PDF version of the product manual is available for download: View User Manual (PDF)