Outsunny 100X80X150 cm Garden Greenhouse

Outsunny Garden Greenhouse Terrace Shed

Model: 100X80X150 cm

Instruction Manual

1. Introduction and Overview

This manual provides essential information for the safe assembly, operation, and maintenance of your Outsunny Garden Greenhouse Terrace Shed. Designed to protect your plants and crops from adverse weather conditions such as cold, frost, hail, rain, moisture, and wind, this greenhouse offers an ideal environment for cultivation.

Key features include a durable steel structure, a weather-resistant PE cover providing protection against rain and UV rays, a wide zip-up roller door for easy access, and ventilation holes for optimal air circulation. The greenhouse also includes sliding metal shelves for organized pot placement and ground stakes for enhanced stability.

Front view of the assembled Outsunny Garden Greenhouse
Front view of the assembled Outsunny Garden Greenhouse.
Outsunny Garden Greenhouse in a garden setting with plants
The Outsunny Garden Greenhouse integrated into a garden setting, filled with various potted plants.

2. Safety Information

  • Always assemble the greenhouse on a flat, level surface.
  • Ensure all ground stakes are securely fastened to prevent wind damage.
  • Do not use sharp objects near the PE cover to avoid punctures.
  • Keep children and pets away from the assembly area.
  • Provide adequate ventilation, especially on hot days, to prevent overheating of plants.
  • Regularly check the stability of the structure, especially after strong winds or heavy rain.

3. Package Contents

Please verify that all components are present before beginning assembly:

  • 1 x Greenhouse Frame and Cover
  • 8 x Fastening Buckles
  • 8 x Ground Stakes
  • 1 x Instruction Manual (this document)

4. Setup and Assembly

Assembly is required for this greenhouse. Follow these general steps for proper installation:

  1. Frame Assembly: Connect the metal frame components according to the included diagrams (not provided in this text, refer to physical manual if available). Ensure all connections are secure.
  2. Cover Installation: Carefully drape the PE cover over the assembled metal frame. Ensure it is properly aligned and covers the entire structure.
  3. Ground Anchoring: For maximum stability and wind resistance, the extended 8 cm edges of the cover must be buried in the ground. Additionally, insert the provided ground stakes through the designated holes in the edge of the cover and firmly into the soil.
Diagram showing how to bury the extended edges and insert ground stakes for stability
Detailed view of ground anchoring: extended 8 cm edges should be buried, and ground stakes inserted through cover holes.
Close-up of ground anchoring details
Illustration of the ground anchoring method for enhanced stability.

5. Operating Instructions

Your Outsunny Garden Greenhouse is designed for ease of use and optimal plant care:

  • Access: The greenhouse features two wide zip-up roller doors. Unzip and roll up the doors to gain easy access to the interior for tending to your plants. Use the fastening buckles to secure the rolled-up doors in place.
  • Ventilation: Small round holes are located on the top of the greenhouse for better ventilation. Utilize these, along with the roll-up doors, to control the internal temperature and humidity, preventing overheating and promoting air circulation.
  • Plant Placement: Use the sliding metal shelves at the bottom to place your potted plants. This keeps them off the ground, preventing direct contact with soil moisture and pests.
Diagram showing round vents and two roll-up doors for practical design
Practical design features: round vents for air circulation and two roll-up doors for easy access.
Close-up of the roll-up door mechanism
Detail of the roll-up door mechanism, showing how it can be secured open.
Interior view of the greenhouse with metal shelves
Interior view showcasing the metal shelves for organized plant placement.

6. Maintenance

  • Cleaning: Clean the PE cover regularly with mild soap and water to remove dirt and debris, ensuring maximum light penetration. Avoid abrasive cleaners.
  • Frame Inspection: Periodically check the metal frame for any signs of rust, damage, or loose connections. Tighten any loose bolts or replace damaged parts as needed.
  • Ground Anchoring: Re-check the ground stakes and buried edges periodically, especially after heavy winds or rain, to ensure the greenhouse remains securely anchored.
  • Cover Integrity: Inspect the PE cover for any tears or holes. Small tears can often be repaired with specialized greenhouse repair tape to prevent them from enlarging.

7. Troubleshooting

  • Greenhouse Instability: If the greenhouse feels unstable, ensure all ground stakes are fully inserted and the extended edges of the cover are properly buried. Check all frame connections for tightness.
  • Poor Ventilation/Overheating: If plants are wilting or the interior is too hot, ensure the roll-up doors are open and the top vents are clear to allow for adequate airflow. Consider partially opening doors during peak heat.
  • Water Accumulation: Ensure the cover is taut and properly fitted to allow water to run off. Check for any sagging areas where water might collect.

8. Specifications

FeatureDetail
ColorWhite and Dark Green
MaterialMetal (Frame) and PE (Cover)
Total Measurements (L x W x H)100 cm x 80 cm x 150 cm
Eave Height130 cm
Door Measurements (W x H)81 cm x 133 cm
Shelf Measurements (L x W)42 cm x 21 cm
Reference845-605
Diagram illustrating the dimensions of the greenhouse
Overall dimensions of the greenhouse, including length, width, height, and door size.
Diagram highlighting material quality: PE cover and metal frame with anti-breakage, heat preservation, UV protection, and bird-proof features
Material quality details: PE cover and metal frame, offering anti-breakage, heat preservation, UV protection, and bird-proof properties.

9. User Tips

  • For optimal plant growth, consider placing the greenhouse in a location that receives adequate sunlight throughout the day.
  • Monitor internal temperature and humidity regularly, adjusting ventilation as needed to suit the specific requirements of your plants.
  • Utilize the shelves to maximize growing space and keep different plant types organized.
  • In extremely windy conditions, consider adding additional anchoring or temporarily relocating the greenhouse if possible.

10. Warranty and Support

For any questions, concerns, or support regarding your Outsunny Garden Greenhouse Terrace Shed, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Related Documents - 100X80X150 cm Garden Greenhouse

Preview Outsunny 845-204V03 Garden Greenhouse Assembly Instructions
Detailed assembly guide for the Outsunny 845-204V03 garden greenhouse. Includes parts list, step-by-step instructions, and international customer support contact details.
Preview Outsunny 845-592V02 Walk-In Greenhouse Assembly Instructions
Step-by-step assembly guide for the Outsunny 845-592V02 walk-in greenhouse. Includes parts list, assembly steps, and contact information. Estimated 2 hours assembly time for 2+ people. Protect your plants with this durable garden structure.
Preview Outsunny 8x6ft Garden Shed Assembly Instructions & Manual
Comprehensive assembly guide for the Outsunny 8x6ft garden storage shed (Model 845-429). Includes parts list, safety tips, and maintenance advice.
Preview Outsunny Storage Shed Assembly Manual and Guide
Comprehensive assembly manual for the Outsunny storage shed. Provides step-by-step instructions, parts list, safety guidelines, and maintenance tips for easy and enjoyable construction.
Preview Outsunny 845-031 Series Metal Storage Shed Assembly Manual
Comprehensive assembly instructions for the Outsunny 845-031 series metal storage shed. Includes parts list, safety guidelines, care and maintenance tips, and a step-by-step assembly overview.
Preview Outsunny 845-030 Series Storage Shed Assembly Manual
Comprehensive assembly instructions and guide for the Outsunny 845-030 series storage shed, covering preparation, parts, safety, and step-by-step assembly. Includes dimensions, parts list, and maintenance tips.