LEKATO USB MIDI Interface Cable

Contents

LEKATO USB to MIDI Interface Cable Instruction Manual

Model: USB MIDI Interface Cable

Brand: LEKATO

1. Introduction

The LEKATO USB to MIDI Interface Cable is designed to connect your MIDI-compatible musical instruments to your computer, enabling seamless data transmission for recording, composing, and performing. This plug-and-play cable simplifies the process of integrating your electronic instruments into your digital audio workstation (DAW) setup.

LEKATO USB MIDI Interface Cable with 6.5ft length label
Figure 1: LEKATO USB MIDI Interface Cable overview.

2. Safety & Warnings

Please read and follow all instructions carefully to ensure safe operation and prevent damage.

  • Do not disassemble or repair this product yourself.
  • Do not use or store the cable near heat sources, damp, or dusty areas. Avoid violent vibrations or shock.
  • Do not drop this product, as it may malfunction.
  • Do not use alcohol or other cleaning fluids to clean this product. Use only a dry cloth.
  • Protect the power cord from being walked on or pinched, especially at plugs, convenience receptacles, and the point where they exit the apparatus.
  • Use only attachments/accessories specified by the manufacturer.
  • Unplug this apparatus during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

General Safety Advisory

This product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Essential Precautions:

  • Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, or toxic substances before proceeding.
  • Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
  • Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
  • Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required:

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.

Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

3. Features

  • High Quality MIDI Interface: 1 in + 1 out indicators simplify troubleshooting incoming and outgoing MIDI data. Supports up to 16 channels input & output channels. Made with good material for true original audio transmit.
  • Fast and Stable Transmission: Ultra-low latency MIDI Input and Output for fast and stable MIDI data transmission. The MIDI cable is made of soft bare copper material with strong electrical conductivity.
  • Plug & Play: Provides a direct connection to any MIDI device. No special drivers are required; just plug and play with Windows (Win 7, Win 8, Win 10) and Mac OS, and musical instruments.
  • Intelligent LED Indicator: Built-in driver and intelligent LED indicators. Red indicates Power, Blue indicates signal transfer & connections, making it easier to monitor MIDI connections.
  • Wide Compatibility: Can be used for connection between electronic instruments such as piano, keyboard, electric piano, hand roll piano, electric guitar, and computer.
Image showing various musical instruments like sound module, electronic organ, synthesizer, and electric drum, indicating wide compatibility.
Figure 2: Wide compatibility with various electronic musical instruments.

4. Setup Instructions

Follow these steps to connect your MIDI device to your computer using the LEKATO USB to MIDI Interface Cable:

  1. Connect MIDI OUT to MIDI IN: Connect the MIDI "OUT" plug of the LEKATO cable to the MIDI "IN" port of your musical instrument (e.g., piano, keyboard).
  2. Connect MIDI IN to MIDI OUT: Connect the MIDI "IN" plug of the LEKATO cable to the MIDI "OUT" port of your musical instrument.
  3. Connect USB to Computer: Plug the USB end of the LEKATO cable into an available USB port on your computer (Windows PC or Mac).
  4. Power On: Ensure your musical instrument is powered on.
  5. Driver Installation (Automatic): The cable is plug-and-play. Your operating system (Windows or Mac OS) should automatically detect and install the necessary drivers. No manual driver installation is typically required.
  6. Software Recognition: Open your preferred music software (DAW, sequencer, or notation software) on your computer. The MIDI input/output should now be recognized as a MIDI device. Configure your software to use the LEKATO USB MIDI Interface for input and output.
Close-up of 5-Pin DIN MIDI IN and OUT connectors with 'Plug & Play' text, showing how to connect to a MIDI device.
Figure 3: Connecting the 5-Pin DIN MIDI plugs to your instrument.
USB MIDI cable connected to a laptop and a MIDI keyboard, illustrating a typical setup.
Figure 4: Example setup with a laptop and MIDI keyboard.

For a visual guide on connecting and using the cable, please refer to the demonstration video below.

Video 1: Demonstration of LEKATO USB MIDI Interface Cable setup and use with a piano and computer software.

5. Operation

Once the LEKATO USB to MIDI Interface Cable is properly connected and recognized by your computer and music software, you can begin transmitting MIDI data.

  • MIDI Data Flow:
    • Data sent from your instrument's MIDI OUT port will be received by the cable's MIDI IN plug and transmitted to your computer via USB.
    • Data sent from your computer's music software will be transmitted via USB to the cable, then sent from the cable's MIDI OUT plug to your instrument's MIDI IN port.
  • LED Indicators:
    • The Red LED indicates that the cable is powered on.
    • The Blue LED indicates active MIDI signal transfer and connections. It will flash when MIDI data is being sent or received.
  • Software Configuration: Ensure your Digital Audio Workstation (DAW) or music software is correctly configured to use the LEKATO USB MIDI Interface as its MIDI input and output device. This typically involves selecting the cable from a list of available MIDI devices within your software's preferences or settings.

6. Maintenance

To ensure the longevity and optimal performance of your LEKATO USB to MIDI Interface Cable, follow these maintenance guidelines:

  • Cleaning: Clean the cable and connectors only with a dry, soft cloth. Do not use alcohol, solvents, or any other cleaning fluids, as these can damage the materials.
  • Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive humidity. Avoid tightly coiling or bending the cable sharply to prevent internal wire damage.
  • Handling: Always handle the cable by the connectors, not by the cable itself, when plugging or unplugging. This prevents strain on the cable-to-connector junction.
  • Inspection: Periodically inspect the cable for any signs of wear, cuts, fraying, or damage to the connectors. If any damage is observed, discontinue use and consider replacement.

7. Troubleshooting

If you encounter issues with your LEKATO USB to MIDI Interface Cable, try the following troubleshooting steps:

ProblemPossible CauseSolution
No power (Red LED off)USB not connected or faulty USB port.Ensure the USB plug is securely connected to a working USB port on your computer. Try a different USB port.
No MIDI signal (Blue LED not flashing)Incorrect MIDI connections, instrument not sending MIDI, or software not configured.
  • Verify MIDI OUT of cable is connected to MIDI IN of instrument, and MIDI IN of cable is connected to MIDI OUT of instrument.
  • Ensure your musical instrument is powered on and configured to send/receive MIDI data.
  • Check your music software's MIDI settings to ensure the LEKATO USB MIDI Interface is selected as the input/output device.
  • Test with another MIDI device or computer if possible.
Intermittent or poor MIDI signalInterference from other wireless devices or physical obstructions.
  • Keep the cable and connected devices away from wireless routers, Wi-Fi devices, and other wireless equipment.
  • Ensure there are no significant physical obstructions between the cable's interface box and other devices that might cause signal degradation.
Cable not recognized by computerTemporary software glitch or driver issue.
  • Unplug and re-plug the USB cable.
  • Restart your computer.
  • While no special drivers are required, ensure your operating system is up to date.

8. Specifications

AttributeDetail
BrandLEKATO
TypeUSB to MIDI Interface Cable
Cable Length6.5 FT
ColorBlack
Connector TypeUSB, 5-Pin DIN MIDI IN/OUT
MaterialCopper (core)
CompatibilityWindows (Win 7/8/10), Mac OS, various electronic musical instruments (piano, keyboard, electric piano, hand roll piano, electric guitar, etc.)
IndicatorsRed (Power), Blue (Signal Transfer & Connections)
Diagram showing the internal construction of the cable, including copper wire, PVC jacket, aluminum foil shielding, and braided pure copper wire shielding.
Figure 5: High-quality combined core construction for stable data transmission.

9. User Tips

Based on user feedback, here are some tips for an optimal experience:

  • Users consistently report that the cable "works perfectly" and is a "useful item."
  • The "quality is very good," indicating reliable performance and durable materials.
  • Ensure proper connection of MIDI IN/OUT ports to avoid confusion, as indicated by the clear labeling on the connectors.

10. Warranty & Support

For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 LEKATO. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.