LEKATO TM-25

Contents

LEKATO TM-25 3-in-1 Clip-On Tuner, Metronome, and Tone Generator User Manual

Model: TM-25

Brand: LEKATO

Introduction

The LEKATO TM-25 is a versatile 3-in-1 device designed for musicians, combining a precise tuner, a rhythmic metronome, and a convenient tone generator. Its compact, clip-on design and bright LCD display make it an essential tool for tuning and practice across various string instruments. This manual provides detailed instructions for setup, operation, and maintenance of your TM-25 device.

Setup

1. Battery Installation

The device uses one CR2032 battery. To install or replace the battery, locate the battery compartment on the back of the unit. Insert the CR2032 battery with the positive (+) side facing up. Ensure the compartment cover is securely closed.

Image showing the LEKATO TM-25 tuner with a CR2032 battery next to its open battery compartment.
Figure 1: Battery installation for the LEKATO TM-25.

2. Attaching the Tuner

The TM-25 features a 360-degree rotatable clip. Attach the clip securely to the headstock of your instrument (guitar, bass, violin, ukulele). Adjust the display to an angle that provides optimal visibility.

Image showing the LEKATO TM-25 tuner clipped onto the headstock of an acoustic guitar.
Figure 2: LEKATO TM-25 clipped onto a guitar headstock.

Operating Instructions

Controls Overview

Front view of the LEKATO TM-25 tuner, highlighting its buttons and LCD display.
Figure 3: Front view of the LEKATO TM-25 with controls.
  • Power Button (⑂): Press and hold to turn the device on/off. Briefly press to start/stop metronome or tone generator.
  • M (Mode) Button: Press to cycle through Tuner, Metronome, and Tone Generator modes.
  • ITEM Button: In Tuner mode, select instrument type. In Metronome mode, adjust beat and rhythm types.
  • Up/Down Arrows (▲/▼): Adjust A4 frequency in Tuner mode, tempo in Metronome mode, or note in Tone Generator mode.
  • Rhythm/Volume Button (♫): Press and hold to adjust metronome volume.

1. Power On/Off

Press and hold the Power button (marked with a circle and vertical line) to turn the device on or off. The device has an auto-power-off function; it will turn off automatically after 5 minutes of no signal or operation to conserve battery life. Each shutdown automatically saves the current parameters.

2. Tuner Mode

  1. Press the 'M' (Mode) button until 'Tuner' mode is displayed.
  2. Press the 'ITEM' button to select the desired instrument tuning mode: C (Chromatic), G (Guitar), B (Bass), U (Ukulele C), or V (Violin).
  3. Play a single note on your instrument. The display will show the note name and an accuracy indicator.
  4. When the note is in tune, the LCD backlight will turn green. If the note is sharp or flat, the backlight will be orange.
  5. The A4 reference frequency can be adjusted from 430Hz to 450Hz using the Up/Down arrow buttons.
Image illustrating the LEKATO TM-25 display showing sharp (orange), flat (orange), and in-tune (green) indications.
Figure 4: Display indications for sharp, flat, and in-tune.
Close-up of the LEKATO TM-25 display in tuning mode, showing the note 'E' and a cent indicator.
Figure 5: Tuner display showing note and cent indicator.

3. Metronome Mode

  1. Press the 'M' (Mode) button until 'Metronome' mode is displayed.
  2. Press the 'ITEM' button to adjust the beat (0-9) and select from 8 rhythm types.
  3. Use the Up/Down arrow buttons to set the tempo (30-250 bpm).
  4. To adjust the metronome volume, press and hold the Rhythm button (musical note icon) and then use the Up/Down arrows.
  5. Briefly press the Power button to start or stop the metronome.
Image showing the LEKATO TM-25 tuner clipped to an instrument, with the display showing metronome settings (beat and tempo).
Figure 6: Metronome display on the LEKATO TM-25.

4. Tone Generator Mode

  1. Press the 'M' (Mode) button until 'Tone Generator' mode is displayed.
  2. Briefly press the Power button to start playing the selected note.
  3. Use the Up/Down arrow buttons to change the note being generated.

Maintenance

Battery Replacement

When the LCD display becomes dim, it indicates a low battery. Replace the CR2032 battery as soon as possible following the battery installation instructions in the Setup section.

Cleaning

Wipe the device with a soft, dry cloth. Do not use liquid cleaners or solvents, as these may damage the unit.

Troubleshooting

Problem: Display is dim or blank.
Solution: The battery is low. Replace the CR2032 battery.
Problem: Tuner is not detecting notes or is inaccurate.
Solution: Ensure the tuner is securely clipped to the instrument. Check for excessive background noise that might interfere with detection. Verify that the correct instrument mode (Chromatic, Guitar, Bass, Ukulele C, or Violin) is selected.
Problem: Metronome has no sound.
Solution: Check the volume setting. Press and hold the Rhythm button (musical note icon) and adjust the volume using the Up/Down arrow buttons.

Specifications

FeatureSpecification
Tuning ItemsChromatic, Guitar, Bass, Violin, Ukulele C
Tuning RangeA0(27.5Hz)-C8(4186.0Hz)
Tempo Range30-250 bpm
Precision±1 cent
Power1 x CR2032 battery
Power Consumption (Tuning mode)<12mA
Power Consumption (Metronome mode)<20mA
Display SizeApprox. 3.7 x 2.3 cm (1.5 x 0.9 in)
Product Weight32g (1.1 oz)
Package Size4.4 x 4 x 8.4 cm (1.7 x 1.6 x 3.3 in)

User Tips

  • Users find the bright, full-color LCD display very easy to read in various lighting conditions, making it suitable for both practice and performance.
  • The 360-degree rotatable clip allows for flexible positioning, ensuring you can comfortably view the display from any angle on your instrument.
  • The auto-power-off feature is useful for battery conservation, but remember that the device automatically saves your last settings, so you don't need to reconfigure them each time you power on.

Warranty and Support

For any issues, technical support, or warranty inquiries regarding your LEKATO TM-25, please refer to the seller's contact information or the official LEKATO website. It is recommended to keep your purchase receipt as proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.