Introduction
Welcome to your new Lekato Guitar Wireless Acoustic System. This manual provides detailed instructions for setting up, operating, and maintaining your wireless transmitter and receiver. Enjoy the freedom of wireless performance with high-fidelity audio transmission, designed for a wide range of electroacoustic musical instruments.
What's in the Box
Please check the package contents to ensure all items are present:
- 1x Wireless Transmitter
- 1x Wireless Receiver
- 1x USB Charging Cable (double-ended)
- 1x User Manual
Product Overview
The Lekato Wireless Acoustic System consists of a transmitter (TX) and a receiver (RX), designed for seamless audio transmission. Both units feature a compact design and a 280° rotatable plug for versatile connection to various instruments and audio equipment.

Key features include:
- 280° Rotatable Design: The input plug can be rotated to fit various instrument jack placements, ensuring flexibility and convenience.
- 2-in-1 Plugs: The standard 1/4" (6.35mm) mono plug can be removed to reveal a 1/8" (3.5mm) stereo plug underneath, offering broad compatibility with different audio devices.
- Channel Switch Button: Allows selection between multiple channels to avoid interference when using multiple units or in crowded wireless environments.
- USB Charging Port: For convenient recharging of the built-in lithium battery.


Setup Instructions
- Charging the Units:
Before first use, fully charge both the transmitter and receiver using the provided double-ended USB charging cable. A full charge typically takes about 1.5 hours and provides up to 5 hours of continuous use. The indicator light will show charging status (e.g., red for charging, off when fully charged).
- Connecting the Transmitter:
Plug the transmitter (marked 'Transmitter' or 'TX') into your instrument's output jack. For most electric guitars, basses, or keyboards, use the 1/4" (6.35mm) mono plug. If your device requires a smaller input, carefully remove the 1/4" adapter to reveal the 1/8" (3.5mm) stereo plug.

Figure 4: Transmitter connected to an electric guitar. - Connecting the Receiver:
Plug the receiver (marked 'Receiver' or 'RX') into the input jack of your amplifier, mixer, PA system, or other audio device. Ensure the correct plug size (1/4" or 1/8") is used for your receiving device. The 280° rotatable design allows you to adjust the angle for a secure and unobtrusive fit.

Figure 5: Receiver connected to an amplifier.
Operating Instructions
- Powering On/Off:
Long press the On/Off button on both the transmitter and receiver to power them on. Repeat this action to power them off.
- Pairing the Units:
Once both units are powered on, long press the 'Pair' or 'Signal' button on both the transmitter and receiver simultaneously. The units will automatically pair. The indicator lights will confirm successful pairing (e.g., a solid green light). No further operation is required for basic pairing.
- Channel Selection (for multiple units or interference):
The system supports up to 6 sets of devices working simultaneously without interference. If you experience interference or are using multiple wireless systems, briefly press the 'Channel Switch' button on both the transmitter and receiver to cycle through the available channels. Ensure both units are set to the same channel for proper operation.
- Stereo Sound:
This wireless system supports stereo musical passive pickup instruments, providing dual-channel surround sound for a richer audio experience, suitable for electronic drums, passive pickup guitars, basses, and other electric acoustic musical instruments.
Maintenance
- Keep the transmitter and receiver clean and dry. Avoid exposure to moisture or extreme temperatures.
- Store the units in a safe place when not in use to prevent physical damage.
- Regularly charge the units to maintain battery health, even if not used frequently.
- Avoid placing the units near strong magnetic fields, as this can interfere with performance.
Troubleshooting
- No Sound or Intermittent Audio:
- Check Battery Levels: Ensure both the transmitter and receiver are fully charged.
- Verify Power and Pairing: Make sure both units are powered on and successfully paired (indicated by solid lights).
- Match Channels: Confirm that the transmitter and receiver are set to the same channel.
- Reduce Interference: Move away from wireless routers, Wi-Fi hotspots, or other 2.4GHz wireless equipment that might cause interference.
- Check Connections: Ensure the units are securely plugged into your instrument and audio device.
- Environmental Factors: Eliminate interference from surrounding magnetic fields.
- Unit Will Not Power On:
- Recharge: If the product cannot be powered on, switch it off and recharge it for 1-2 hours before attempting to use it again.
- Limited Range:
- Obstacles: The effective range is reduced by obstacles like walls. For optimal range, ensure a clear line of sight between the transmitter and receiver.
- Outdoor vs. Indoor: The maximum range is achieved outdoors without obstacles. Indoor environments or areas with many obstructions will naturally have a shorter effective range.
Specifications
| Feature | Specification |
|---|---|
| Sample Range | 24 Bit/48KHz uncompressed digital transmission |
| Latency | <12 milliseconds (WS-60), Less Than 4ms (A8) |
| Effective Range | >100 feet outdoors (WS-60), Max. 50M (no obstacle); 30M (through-wall) (A8) |
| THD & Noise | <98dB |
| Dynamic Range | >105dB |
| Operating Band | 2.4 GHz ISM Worldwide (Industrial/Scientific/Medical) |
| Frequency Response | 20-20KHz, +1dB/-3dB |
| Rotatable Head | 280° |
| Simultaneous Use | Supports 6 sets of devices (WS-60), 4 sets of devices (A8) |
| Input/Output Support | 3.5mm (1/8") & 6.35mm (1/4") plugs |
| Charge Port | Micro USB |
| Working Time Per Charge | Up to 5 hours |
| Charging Time | Approx. 1.5 hours |
| Battery | Built-in 3.7V 600mAh rechargeable Lithium Polymer battery |
| Dimensions (WS-60) | 6 x 3.9 x 1.7 inches |
| Weight (WS-60) | 150g |
| Dimensions (A8) | 11 x 4.5 x 1.5 cm (4.3 x 1.8 x 0.6 inches) |
| Weight (A8) | 35g (for each unit) |
User Tips
- Sound Quality: Users report that the sound quality is comparable to plugging a cable directly into the guitar, offering a clear and uncompromised audio experience.
- Flexible Design: Take advantage of the 280° rotatable plug to ensure a perfect fit for your instrument's input jack, regardless of its orientation.
- Versatile Connectivity: Remember that the 1/4" plug can be removed to reveal a 1/8" (3.5mm) jack, making it compatible with a wider range of devices, including mobile phones and cameras (may require an adapter cable for specific phone models).
- Mobile Phone Connection: Note that this system uses 2.4GHz wireless transmission, not Bluetooth. To connect to a mobile phone, use the 1/8" (3.5mm) stereo plug with an appropriate adapter cable if needed, rather than attempting a Bluetooth connection.
- Range Expectations: While the system offers a good range, environmental factors like walls and other wireless signals can affect it. For critical performances, test your setup in advance.
Warranty and Support
For any issues, questions, or support needs regarding your Lekato Guitar Wireless Acoustic System, please contact the seller or manufacturer directly. Their customer service team is committed to responding within 24 hours to assist you.