LEKATO WS-60

Contents

Lekato WS-60 2.4Ghz Wireless Guitar System Instruction Manual

Model: WS-60

1. Introduction

The Lekato WS-60 is a 2.4Ghz wireless guitar transmitter and receiver system designed to convert wired microphones and instruments into wireless ones. It offers a user-friendly setup without the need for cables, making it suitable for various venues and applications. This system provides clear signal transmission with low latency and professional sound quality, supporting both mono and stereo musical instruments.

2. Safety & Warnings

General Safety Advisory

This product involves inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Essential Precautions

  • Read and keep all instructions.
  • Heed and follow all warnings and instructions.
  • Do not use this apparatus near water.
  • Clean only with dry cloth.
  • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  • Use only attachments/accessories specified by the manufacturer.
  • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  • Unplug this apparatus during lightning storms or when unused for long periods of time.
  • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  • The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  • Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

Specific Cautions

  • Do not disassemble or repair this product by yourself.
  • Do not use or store it near heat sources, in damp, or dusty areas. Avoid violent vibrations or shock.
  • Do not drop this product, otherwise it may malfunction.
  • Do not use alcohol or other cleaning fluids to clean this product.
  • Please make sure the transmitter and the receiver keep a distance away from wireless routers or other wireless equipment during use.
  • Obstructions between the transmitter and the receiver may affect the transmission distance.
  • A maximum of 4 sets of transmitters and receivers can be used in the same place simultaneously.
  • If only one power indicator is flickering during use, indicating low battery, the transmission distance and quality will be affected. Charge it in time.
  • Please turn off the transmitter and the receiver when not in use.
  • Due to the characteristics of lithium batteries, there is a slight self-discharge. Please charge the battery every 2 months to avoid low battery protection.
  • The lithium battery capacity decreases gradually after repeated charge and discharge, affecting the product's life over time.

EC Declaration of Conformity

This product conforms with all applicable European Union regulations, meeting essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.

3. Product Overview

Package Contents

  • 1x Lekato Wireless Transmitter
  • 1x Lekato Wireless Receiver
  • 1x USB Charging Cable (double-ended)
  • 1x User Manual (PDF available online: User manual (PDF))
Lekato WS-60 Wireless Guitar System Transmitter and Receiver
Lekato WS-60 Wireless Guitar System: Transmitter (red) and Receiver (black) with 1/4" plugs.

Key Features

  • Clear Signal Transmission: 24bit / 48KHz stereo lossless digital transmission sampling rate.
  • Ultra-Low Latency: Less than 12 milliseconds latency for real-time performance.
  • Extended Range: Effective range of more than 100 feet outdoors.
  • 2.4GHz ISM Band: Utilizes the 2.4GHz ISM worldwide operating band for reliable connection.
  • Versatile Connectivity: Includes both 1/8 inch (3.5mm) stereo plugs, 1/4 inch (6.35mm) stereo plugs, and 1/4 inch (6.35mm) mono plugs to support a wide range of musical instruments and audio devices.
  • Stereo Sound Support: Compatible with stereo musical passive pickup instruments, electronic drums, passive pickup guitars, bass, and other electric acoustic musical instruments.
  • Plug and Play: Simple pairing process by long-pressing the signal key.
  • Rechargeable Battery: Built-in lithium battery supports 1.5 hours quick charging for up to 5 hours of play time.
  • Multi-Device Support: Supports up to 6 sets of devices working simultaneously without interference.
  • 280° Rotatable Head: Flexible design to fit most electric music instruments and input jack positions.
  • Automatic Frequency Hopping: Ensures stable connection and avoids interference.
  • 48V Phantom Power Support: Suitable for condenser microphones.
Diagram of 280 degree rotatable design with USB, Channel switch, and On/Off buttons labeled
The 280° rotatable design allows for flexible positioning on various instruments. Labels indicate USB charging port, channel switch button, and On/Off switch.
Diagram showing compatible instruments for 6.35mm and 3.5mm connectors for transmitter and receiver
Transmitter and Receiver compatibility with 6.35mm and 3.5mm connectors for various instruments like keyboards, guitars, bass, mobile phones, and mixers.
Official product video demonstrating the Lekato WS-60 Wireless Guitar System's features, setup, and sound quality.

4. Specifications

FeatureSpecification
Model NumberWS-60
TypeGuitar Transmitter Receiver
Brand NameLEKATO
OriginMainland China
Operating Band2.4 GHz ISM Worldwide
Sample Range24 Bit/48KHz uncompressed digital transmission
Latency<12 milliseconds
Range>100 feet outdoors
THD (Total Harmonic Distortion) & Noise<98dB
Dynamic Range>105dB
Frequency Response20-20KHz, +1dB/-3dB
Rotatable Head280° rotating head, fit for most instruments/devices
Simultaneous UseSupports 6 sets of devices to work simultaneously
Stereo Input and OutputSupport 3.5mm & 6.35mm plug
USB PortMicro USB for quick and easy charging
Batteries IncludedYes (1x Lithium Polymer)
Working Time Per ChargeUp to 5 hours
Channels6 Channels
Weight150g
Dimensions6 x 3.9 x 1.7 inches
Suitable ForElectric Guitar, Keyboard, Mixer, Camera, Bass, Keytar, Mandolin, Synthesizer, Mobile Phones, Tablets

5. Setup

5.1. Charging the Device

  1. Connect the supplied double-ended USB charging cable to the Micro USB ports on both the transmitter and receiver.
  2. Connect the other end of the USB cable to a suitable USB power adapter (not included) or a computer USB port.
  3. The power indicator light will show charging status. A full charge takes approximately 1.5 hours.
  4. Once fully charged, the devices can operate for up to 5 hours.

5.2. Connecting to Instruments and Devices

The Lekato WS-60 features a versatile 2-in-1 plug design, supporting both 1/4" (6.35mm) and 1/8" (3.5mm) connections. The 1/4" plug can be unscrewed to reveal the 1/8" plug underneath.

Close-up of the 1/4 inch and 1/8 inch 2-in-1 plugs
The 2-in-1 plug design allows for both 6.35mm (1/4") and 3.5mm (1/8") connections by unscrewing the outer sleeve.
  • For 1/4" (6.35mm) Mono Instruments: Use the standard 1/4" mono plug for most acoustic-electric guitars, bass, keyboards, etc.
  • For 1/4" (6.35mm) Stereo Instruments/Devices: Use the 1/4" stereo plug for guitar speakers, PA systems, mixers with stereo interfaces, etc.
  • For 1/8" (3.5mm) Stereo Devices: Unscrew the outer 1/4" sleeve to reveal the 1/8" stereo plug. This is suitable for small speakers, cameras, mobile phones, iPads, synthesizers, and other audio products.

5.3. Pairing the Transmitter and Receiver

  1. Power on both the transmitter and the receiver using their respective On/Off switches.
  2. Long press the signal key (channel switch button) on both the transmitter and receiver simultaneously.
  3. The devices will automatically pair. No further operation is required.
  4. The indicator lights will confirm successful pairing (refer to the "Operating Instructions" section for light indications).

6. Operating Instructions

6.1. Power On/Off

  • To power on, press and hold the On/Off button until the indicator light illuminates.
  • To power off, press and hold the On/Off button until the indicator light turns off.
  • Always turn off both the transmitter and receiver when not in use to conserve battery life.

6.2. Channel Switching

The system supports 6 channels, allowing up to 6 sets of devices to operate simultaneously without interference. To switch channels:

  • Briefly press the channel switch button on both the transmitter and receiver to cycle through the available channels.
  • Ensure both the transmitter and receiver are set to the same channel for proper operation.
Front view of Lekato WS-60 transmitter and receiver with indicator lights
Indicator lights on the transmitter (TX) and receiver (RX) show power and connection status.

6.3. Using with Instruments

  1. Plug the transmitter into your instrument's output jack (e.g., guitar, bass, keyboard). Adjust the 280° rotatable head for optimal fit.
  2. Plug the receiver into your amplifier, mixer, audio interface, or other input device.
  3. Ensure both devices are powered on and paired to the same channel.
  4. Adjust the volume on your instrument and receiving device as needed.
Lekato WS-60 in use with an electric guitar and amplifier
The Lekato WS-60 system connected to an electric guitar and amplifier, demonstrating wireless operation.

7. Maintenance

  • Cleaning: Clean the device only with a dry cloth. Do not use alcohol or other cleaning fluids.
  • Battery Care: The built-in lithium battery has a slight self-discharge. To maintain battery health, charge the device every 2 months, even if not in use, to prevent low battery protection issues.
  • Storage: Store the device away from heat sources, damp, and dusty areas. Avoid violent vibrations or shock.
  • General Handling: Do not drop the product as it may malfunction.

8. Troubleshooting

ProblemPossible CauseSolution
No sound or intermittent signal
  • Devices not paired.
  • Low battery.
  • Interference from other wireless devices (routers, etc.).
  • Obstructions between transmitter and receiver.
  • Transmitter and receiver on different channels.
  • Ensure both devices are powered on and long-press the signal key to re-pair.
  • Charge both devices fully.
  • Keep devices away from wireless routers and other wireless equipment.
  • Ensure a clear line of sight between transmitter and receiver.
  • Verify both devices are set to the same channel.
Power indicator flickeringLow battery.Charge the device immediately. Low battery can affect transmission distance and quality.
Amp produces humming/snoring sound with distortion
  • Interference from surrounding magnetic fields or other electronics.
  • High gain/distortion settings on amplifier.
  • Channel interference.
  • Try moving the transmitter/receiver away from other electronic devices or power sources.
  • Experiment with different channels on the wireless system.
  • Reduce gain or distortion settings on your amplifier to see if the noise decreases.
  • Ensure proper grounding of your amplifier and instrument.

9. User Tips

  • Sound Quality: Many users find the sound quality to be comparable to a direct cable connection, offering clear and uncompressed audio.
  • Flexible Design: Take advantage of the 280° rotatable head to ensure a secure and comfortable fit for your instrument's input jack, regardless of its position.
  • Versatile Plugs: Remember that the 1/4" plug can be unscrewed to reveal a 1/8" jack, significantly expanding compatibility with various audio devices like phones, tablets, and cameras.
  • Minimize Interference: For optimal performance, try to keep the transmitter and receiver away from Wi-Fi routers, microwaves, and other 2.4GHz devices, especially in crowded environments.
  • Battery Management: Regularly charge your devices, even when not in frequent use, to prolong the lifespan of the lithium-ion batteries.

10. Warranty & Support

For detailed warranty information and technical support, please refer to the official user manual (PDF) available online: Lekato WS-60 User Manual (PDF). If you encounter any issues not covered in this manual or require further assistance, please contact Lekato customer service.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.