Manuals+

Orico 6648US3-C

ORICO 4 Bay Hard Drive Docking Station

Model: 6648US3-C

User Instruction Manual

1. Introduction

The ORICO 4 Bay Hard Drive Docking Station (Model 6648US3-C) is a versatile device designed to easily connect and manage multiple 2.5-inch and 3.5-inch SATA SSD/HDD drives. It features USB 3.0 connectivity for high-speed data transfer and a convenient offline clone function, allowing you to duplicate hard drives without needing a computer connection. Its tool-free design and intelligent sleep mode enhance user experience and drive longevity.

ORICO 4 Bay Heat Dissipation SSD/HDD Offline Clone Docking Station
ORICO 4 Bay Heat Dissipation SSD/HDD Offline Clone Docking Station. Features USB 3.0, Single 16TB Max, Copy.

2. Package Contents

Please check the box for the following items:

  • 1 x ORICO Four Bay+Clone Hard Drive Docking Station
  • 1 x USB 3.0 Type B to Type A Cable (100cm)
  • 1 x 12V6A Power Adapter
  • 1 x User Manual
  • 1 x Service Card

Note: Hard drives (HDD/SSD) are NOT included in the package.

3. Specifications

Feature Description
Brand Name Orico
Model Number ORICO 6648US3-C
Item 4-Bay 2.5 3.5 Hard Drive Docking Station/Duplicator
Case Material Plastic (ABS Material)
Size 3.5", 2.5" (HDD/SSD)
Supporting Hard Drive Capacity Up to 64TB (4*16TB)
External Interface USB 3.0 Type-B
Transmission Speed 5Gbps
Installation Tool Free Installation
Clone Function 1 to 3 Standalone Clone (Offline Clone)
Other Functions Hot-swap, Support UASP Protocol, Vertical Heat Dissipation
Indicator Blue LED Indicator
Driver Driver Not Required
Power Adapter 12V6A Power Adapter
Dimensions 144 x 80.7 x 216.7mm (W 217 x D 142 x H 80 mm / W 8.54 x D 5.59 x H 3.14 in)

4. Setup

Follow these steps to set up your ORICO 4 Bay Hard Drive Docking Station for use with a PC:

  1. Connect Power: Plug the 12V6A power adapter into the DC port on the back of the docking station and then into a power outlet.
  2. Insert Hard Drives: Gently insert your 2.5-inch or 3.5-inch SATA SSD/HDD drives into the available bays. The tool-free design allows for easy insertion.
  3. Connect to PC: Ensure the PC/CLONE switch on the back of the docking station is set to the "PC" position. Connect the USB 3.0 Type B to Type A cable from the docking station's USB 3.0 port to an available USB port on your computer.
  4. Power On: Press the power button on the docking station. The blue LED indicators will light up, signifying power and drive activity.
  5. Drive Recognition: Your computer should automatically detect the connected hard drives. If a new hard drive is not unpacked or recognized, it may need to be formatted.
Diagram of ORICO 4 Bay Docking Station connections and controls
Diagram showing the DC adapter, USB 3.0 Type-B port, SSD/HDD slots, and On/Off button.
USB 3.0 cable and 12V6A Power Adapter
Included USB 3.0 Type B to Type A cable and 12V6A Power Adapter.
2.5/3.5 inch HDD/SSD compatibility with PC connection
The docking station supports both 2.5-inch and 3.5-inch HDD/SSD drives for tool-free installation and connection to a PC.
Video demonstrating the connection of the ORICO 6648US3-C hard drive dock to a PC, including how to format a new hard drive and resolve drive letter conflicts.

5. Operating Modes

5.1. PC Mode (External Drive Function)

In PC mode, the docking station acts as an external multi-bay enclosure, allowing your computer to access up to four inserted hard drives simultaneously. This mode is ideal for data storage, backup, and quick access to multiple drives.

  1. Ensure the PC/CLONE switch on the back is set to "PC".
  2. Connect the USB 3.0 cable to your PC and the docking station.
  3. Insert your hard drives into the bays.
  4. Power on the docking station.
  5. The drives will appear as separate disks in your computer's file explorer.
Docking station connected to a laptop with hard drives inserted
The docking station connected to a laptop, ready for data access in PC mode.

5.2. Offline Clone Function

The offline clone function allows you to duplicate data from a source disk to one or more target disks without connecting to a computer. This is useful for creating backups or upgrading drives.

  1. Disconnect USB: Ensure the USB cable is disconnected from your computer.
  2. Insert Drives: Insert the source hard drive into the "Source" bay (usually the first bay). Insert one or more target drives into the "Target" bays.
  3. Target Drive Capacity: The capacity of each target drive must be equal to or larger than the source drive.
  4. Set Switch: Push the PC/CLONE switch on the back of the hard drive dock to the "CLONE" side.
  5. Connect Power: Connect the power supply and press the POWER switch to turn on the device.
  6. Start Cloning: Press the START button on the back of the device twice quickly.
  7. Monitor Progress: A blue LED will flash on the 20% indicator, signifying that the cloning process has begun. The LEDs will progressively light up (20%, 40%, 60%, 80%, 100%) as the cloning progresses.
  8. Cloning Complete: The cloning process is complete when ALL the lights turn solid blue (20%-100%). The device will beep 3 times, and the hard drives will enter Sleep Mode.
  9. Eject Drives: Finally, press the POWER switch to turn off the device and safely eject your drives.
Offline Clone function with 16TB capacity
The docking station supports offline cloning up to 16TB per drive, with dimensions W 217 x D 142 x H 80 mm (W 8.54 x D 5.59 x H 3.14 in).
Rear panel controls for PC/Clone mode and Start/Reset buttons
Detailed view of the rear panel controls, including the PC/CLONE switch, START and RESET buttons, USB 3.0 port, and DC power port.
Video demonstrating the standalone clone function of the ORICO 6648US3-C hard drive dock.

6. Maintenance

  • Keep the device in a clean, dry environment away from direct sunlight, heat sources, and moisture.
  • Avoid dropping or subjecting the device to strong impacts.
  • Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Ensure proper ventilation around the device to prevent overheating, especially during prolonged operation or cloning. The vertical heat dissipation design aids in this.
  • Always safely eject or power off the device before removing hard drives or disconnecting cables to prevent data loss or drive damage.

7. Troubleshooting

  • Drives not recognized by PC:
    • Ensure the PC/CLONE switch is set to "PC".
    • Check all cable connections (USB and power).
    • For new hard drives, they may need to be initialized and formatted. Right-click "Computer" (or "This PC"), select "Manage" > "Disk Management". Locate the new disk, initialize it (MBR for 2TB and below, GPT for above 2TB), and create a new simple volume.
    • If multiple disks are inserted and one is offline due to drive letter conflict, in "Disk Management", right-click the offline disk and select "Online".
  • Offline Clone fails or does not start:
    • Ensure the USB cable is disconnected from the computer. The clone function is standalone.
    • Verify that the target disk's capacity is equal to or larger than the source disk's capacity.
    • Make sure the PC/CLONE switch is set to "CLONE".
    • Ensure you press the START button twice quickly to initiate the cloning process.
    • Any data on the target disk will be overwritten. Ensure you have backed up any important data from the target disk before cloning.
  • Slow transfer speeds:
    • Ensure you are using a USB 3.0 port on your computer and the provided USB 3.0 cable.
    • Verify that your operating system and drivers support USB 3.0 and UASP protocol.

8. User Tips

  • New Hard Drive Formatting: For new hard drives that are not yet formatted, you will need to initialize and format them through your operating system's Disk Management utility. Choose MBR format for disks 2TB and below, and GPT for disks above 2TB.
  • Offline Clone Duration: The time required for a standalone copy (offline clone) depends on the performance and capacity of the source disk. For example, a 500GB HDD typically takes about 1.5 hours. The process will beep 3 times and enter Sleep Mode upon completion.
  • Multiple Disk Cloning: This docking station supports cloning from one source disk to up to three target disks simultaneously in offline clone mode.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the included Service Card or contact your original point of purchase. Keep your proof of purchase for warranty claims.

Related Documents - 6648US3-C

Preview ORICO 6638US3-C / 6648US3-C Multi-Bay HDD Docking Station User Manual
Comprehensive user manual for the ORICO 6638US3-C and 6648US3-C multi-bay HDD docking stations. Covers product overview, features, specifications, quick start guide, offline cloning instructions, troubleshooting tips, Windows drive initialization and formatting, safe device removal procedures, important notices, and company declarations.
Preview How to Operate Offline Clone - ORICO Hard Drive Docking Station
Guide on how to operate the offline clone function of the ORICO Dual Bay Hard Drive Docking Station. Includes step-by-step instructions and troubleshooting for drive letter assignment.
Preview ORICO 6228US3-C User Manual: 2-Bay USB 3.0 HDD Docking Station with Cloning
Comprehensive user manual for the ORICO 6228US3-C, a 2-bay USB 3.0 offline hard drive cloning docking station. Learn about installation, features, cloning, troubleshooting, and precautions for your 2.5/3.5 inch SATA hard drives.
Preview ORICO Hard Drive Docking Station User Guide: PC and Clone Modes
Comprehensive guide to using the ORICO Hard Drive Docking Station in both PC Mode and Clone Mode, including operation steps, important attention points, and troubleshooting tips.
Preview ORICO 6828US3-C Dual-Bay USB 3.0 Hard Drive Dock with Offline Clone User Manual
Comprehensive user manual for the ORICO 6828US3-C, a dual-bay USB 3.0 hard drive dock. Learn how to use its standalone offline cloning feature, connect to your PC, and find specifications, features, and safety information.
Preview ORICO 6528US3-C Dual Bay SATA Hard Drive Duplicator User Manual
Comprehensive user manual for the ORICO 6528US3-C dual bay SATA hard drive duplicator, covering product overview, features, specifications, quick start guide, cloning operations, disk initialization and formatting, warranty, and FCC compliance.