AODELAN E4 TTL Wireless Flash Trigger

1. Introduction

The AODELAN E4 is a versatile TTL (Through-The-Lens) wireless flash transmitter designed for seamless integration with the PROFOTO radio system. It enables wireless synchronization of PROFOTO flashes with your camera, offering both automatic TTL exposure control and the flexibility to manually adjust flash brightness. This manual provides detailed instructions for setting up, operating, and maintaining your E4 flash trigger to achieve optimal photographic results.

2. Package Contents

Please check the package to ensure all items are present:

• 1 x AODELAN E4 Wireless Flash Trigger
• 1 x Lanyard
• 1 x User Manual

3. Product Features

• Profoto Air TTL Compatibility: Wirelessly synchronizes with Profoto flashes.
• TTL Mode: Remotely controls Profoto flashes for fully automatic point-and-shoot shots.
• HSS (High-Speed Sync): Allows flash use at shutter speeds up to 1/8000s, enabling control of ambient light and crisp images without motion blur.
• Multiple Channels & Groups: Features 8 channels (1-8) and 3 groups (A-C) for independent flash control.
• Long Operating Range: Offers a working range of up to 200m (656ft) for triggering and up to 330ft for remote control and TTL.
• Power Options: Can be powered by 2 x AAA batteries (not included) or via a power bank through the micro USB port.

4. Setup

4.1 Battery Installation

The AODELAN E4 requires 2 x AAA batteries for operation. To install:

1. Locate the battery compartment on the back of the E4 trigger.
2. Slide open the battery compartment cover.
3. Insert two AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Alternatively, the unit can be powered via a power bank connected to the Micro-USB B port for extended use or firmware updates.

4.2 Mounting to Camera

The E4 trigger is designed to mount onto your camera's hot shoe:

1. Ensure the E4 is powered off.
2. Slide the E4's hot shoe mounting foot into your camera's hot shoe.
3. Secure the trigger by turning the mounting foot lock lever (if present on your model) until it is firmly attached.

4.3 Camera Compatibility

The AODELAN E4 is compatible with various camera brands that feature a standard single-pin contact hot shoe mount. Specific hot shoe designs for different brands are shown below:

5. Operation

5.1 Display Overview

The E4 features a clear display showing critical information such as group settings, energy levels, modeling light status, battery level, mode, sync settings, and channel. Familiarize yourself with the display layout for efficient operation.

5.2 Button Functions

The E4 trigger has several buttons for controlling various functions:

• Power Button: Turns the E4 on or off.
• Test Button: Triggers a test flash.
• Group Buttons (A, B, C): Selects and controls individual flash groups.
• Energy Adjustment Buttons (+/-): Adjusts the flash energy output.
• Mode Button: Toggles between TTL and Manual (M) modes.
• Sync Button: Cycles through sync modes (1st curtain, 2nd curtain, HSS).
• Channel/Beeper Button: Short press to switch channels (1-8). Long press to turn the beeper on/off.
• Head Button: Turns the flash head on/off.
• Model Button: Turns the modeling light on/off.

5.3 Modes (TTL, Manual, HSS)

• TTL (Through-The-Lens) Mode: Provides automatic flash exposure by measuring the light through the camera's lens. Ideal for fast-paced shooting where lighting conditions change frequently.
• Manual (M) Mode: Allows precise control over flash power output. Adjust the energy using the +/- buttons for consistent lighting in controlled environments.
• HSS (High-Speed Sync): Enables the use of flash at shutter speeds faster than the camera's native flash sync speed (up to 1/8000s). This is crucial for overpowering ambient light in bright conditions or using wide apertures outdoors.

5.4 Channels and Groups

The E4 supports 8 frequency channels and 3 groups (A, B, C), allowing you to control multiple Profoto flashes independently without interference. This is particularly useful in multi-flash setups or when working in environments with other wireless systems.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the trigger. Avoid using liquid cleaners or solvents.
• Storage: Store the E4 in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if the unit will not be used for an extended period to prevent leakage.
• Hot Shoe Contacts: Keep the hot shoe contacts clean and free from dust or debris to ensure reliable connection with your camera.

7. Troubleshooting

• Trigger Not Firing:
  • Check battery level and replace if necessary.
  • Ensure the E4 is securely mounted on the camera's hot shoe.
  • Verify that the flash units are powered on and set to the correct channel and group as the E4.
  • Check camera settings to ensure external flash is enabled.
• Inconsistent Flash Exposure:
  • In TTL mode, ensure there are no obstructions between the E4 and the flash units.
  • In Manual mode, double-check the power settings on the E4 and the flash units.
  • Ensure the camera's ISO, aperture, and shutter speed settings are appropriate for the lighting conditions.
• Limited Range:
  • Ensure there are no significant physical obstructions (walls, large objects) between the E4 and the flash units.
  • Check for potential sources of 2.4GHz interference in the environment.
  • Verify battery levels on both the E4 and flash units.

8. Specifications

9. Warranty and Support

AODELAN products are backed by a 365-day warranty from the date of purchase. For technical support or warranty claims, please contact AODELAN customer service. Keep your purchase receipt as proof of purchase.

10. User Tips

• Check Compatibility: The E4 is compatible with a wide range of camera brands including Canon, Nikon, Sony, Olympus, Panasonic, Pentax, and Fujifilm. Ensure your camera has a standard hot shoe for proper connection.
• Battery Life: For prolonged shooting sessions, consider using a power bank connected via the Micro-USB port to avoid frequent battery changes.
• Firmware Updates: Periodically check the AODELAN website for any available firmware updates for your E4 trigger to ensure optimal performance and compatibility with new camera models or flashes.