1. Product Overview
The Universal ESL EIS ELV Steering Lock Emulator Simulator is designed to bypass and replace faulty Electronic Steering Lock (ESL), Electronic Ignition Switch (EIS), or Electronic Steering Column Lock (ELV) modules in compatible Renault and Dacia vehicles. This device offers a cost-effective and straightforward "plug and start" solution, eliminating the need for complex programming or adaptation.
It replicates the original steering lock's functionality, allowing the vehicle to start and operate normally when the original module fails. The emulator features visual indicators (LEDs) and an audible lock sound for operational feedback.
Figure 1: Front view of the Universal Steering Lock Emulator. Note the 'READY' (green) and 'POWER' (red) indicators, and the text "PLUG & START NO PROGRAMMING REQUIRED".
2. Compatibility
This emulator is compatible with a wide range of Renault and Dacia models. Please verify your vehicle's compatibility before installation.
- Renault Megane 2
- Renault Megane 3
- Renault Clio 3
- Renault Clio 4
- Renault Fluence 2
- Renault Fluence 3
- Renault Scenic 2
- Renault Scenic 3
- Renault Captur
- Renault Latitude
- Renault Samsung models
- Dacia models
3. Setup and Installation
The emulator is designed for a straightforward "Plug & Start" installation, requiring no coding or adaptation. However, professional installation is recommended to ensure correct procedure and vehicle safety.
3.1 Preparation
- Ensure the vehicle's ignition is OFF and the battery is disconnected before beginning installation.
- Locate the original ESL/EIS/ELV module in your vehicle. This is typically found near the steering column.
3.2 Installation Steps
- Carefully disconnect the wiring harness from the original ESL/EIS/ELV module.
- Connect the vehicle's wiring harness directly to the corresponding connector on the Universal Steering Lock Emulator. Ensure a secure connection.
- Mount the emulator in a safe location, away from moving parts or excessive heat/moisture.
- Reconnect the vehicle's battery.
- Turn the ignition ON to test the emulator.
Figure 2: Illustrative image of connecting the emulator to the vehicle's ESI connector. The emulator is designed for direct plug-in replacement.
4. Operating Instructions
Once installed, the emulator operates automatically. It mimics the behavior of a functional steering lock module, allowing the vehicle to start.
4.1 Indicator Lights
- READY (Green LED): Illuminates when the emulator is successfully initialized and ready for operation.
- POWER (Red LED): Illuminates when the emulator receives power from the vehicle.
4.2 Audible Feedback
The emulator is equipped with a "Lock Sound" feature, providing an audible click similar to a mechanical steering lock engaging or disengaging, enhancing the user experience.
5. Maintenance
The Universal Steering Lock Emulator is a maintenance-free device. To ensure its longevity and proper function:
- Keep the device dry and free from moisture.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the connections remain secure and free from corrosion.
- Do not attempt to open or modify the emulator, as this will void any potential warranty.
6. Troubleshooting
If you encounter issues after installing the emulator, consider the following troubleshooting steps:
- Vehicle Does Not Start:
- Verify that the emulator is correctly connected to the vehicle's wiring harness.
- Check all fuses related to the ignition and steering lock system.
- Ensure the vehicle battery is fully charged and properly connected.
- Confirm that your vehicle model is listed in the compatibility section.
- No Indicator Lights:
- Check the power supply to the emulator. The red POWER LED should illuminate when ignition is on.
- Inspect the wiring harness for any damage or loose connections.
- Emulator Makes No Sound:
- While the audible lock sound is a feature, its absence does not necessarily indicate a malfunction if the vehicle starts correctly. If the vehicle does not start, refer to the "Vehicle Does Not Start" steps.
If problems persist after following these steps, it is recommended to consult a qualified automotive technician or contact the seller for further assistance.
7. Specifications
| Feature | Description |
|---|---|
| Product Type | ESL EIS ELV Steering Lock Emulator Simulator |
| Special Features | For ESL Steering Lock replacement |
| Compatibility | Renault Megane 2/3, Clio 3/4, Fluence 2/3, Scenic 2/3, Captur, Latitude, Samsung, Dacia |
| Programming Required | No (Plug and Start) |
| Software Update | Not applicable |
| Hardware Version | Specific for Renault vehicles |
| Audible Feedback | With Lock Sound |
| Origin | Mainland China |
| Certification | None specified |
| Dimensions (approx.) | Length: 5 cm, Width: 5 cm, Height: 8 cm |
| Weight (approx.) | 0.05 kg |
8. Warranty and Support
For specific warranty terms and conditions, please refer to the purchase agreement or contact the seller directly. General support information is provided below:
- Seller: Fauna Motor Co., Ltd Store
- Returns: Free returns are typically available within 90 days of purchase. Please check the seller's return policy for details.
- Technical Support: For technical assistance or further inquiries, please contact Fauna Motor Co., Ltd Store through the platform where the product was purchased.
- Security & Privacy: AliExpress ensures safe payments and protects your personal details.
It is recommended to retain your proof of purchase for any warranty claims or support requests.
