1. Introduction
The Baseus Super Energy Air Car Jump Starter is a versatile and portable device designed to provide emergency jump-starting for vehicles, act as a power bank for electronic devices, and offer emergency lighting. It features a high-capacity battery and smart safety protections for reliable use.
Image: Person connecting Baseus jump starter to a car battery.
2. Safety Information
Please read and understand all safety information before using this product. Improper use can result in product damage, overheating, toxic fumes, fire, or explosion.
2.1 Nine Safety Protections
The device is equipped with the following safety features to ensure safe operation:
- Lithium polymer battery protection
- Overcharge protection
- Voltage stabilization protection
- Constant current protection
- Short circuit protection
- Over discharge protection
- Anti-anti protection (reverse polarity protection)
- Temperature protection
- Overcurrent protection
Image: Smart ignition clamps with safety features, including safe operation, intelligent detection, and anti-reverse connection.
2.2 Important Warnings
- **Incorrect Connection**: Ensure the positive (red) clamp is connected to the positive terminal and the negative (black) clamp to the negative terminal. Reverse connection or connecting both clamps to the same pole will trigger a safety warning (red light and beeping sound) and may cause irreversible damage.
- **Air Travel**: The device has a rated power of 37Wh, which conforms to civil aviation standards. It can be carried on a plane in hand luggage. Note: According to civil aviation regulations, 3C digital products cannot be checked-in and must be carried in hand luggage.
Image: Baseus jump starter on an airplane tray table, illustrating its compliance with civil aviation standards for air travel.
3. Package Contents
Verify that all items are included in your package:
- Baseus Super Energy Air Car Jump Starter
- Smart Ignition Clamps
- USB-C Charging Cable
Image: The Baseus Super Energy Air Car Jump Starter, smart ignition clamps, and USB-C charging cable, representing the package contents.
4. Specifications
| Parameter | Value |
|---|---|
| Brand | Baseus |
| Name | Baseus Super Energy Air Car Jump Starter (10000mAh, Peakcurrent 1000A) Black |
| Model | BS-CH001 |
| Capacity | 10000mAh/3.7V/37Wh |
| Type-C Input | 5V/2.4A (Max) |
| USB Output | 5V/2.4A (Max) |
| Total Output | 12W (Max) |
| Starting Voltage | 12 V |
| Starting Current | 500 A |
| Peak Current | 1000 A |
| Applicable Model | 12V Petrol cars with displacement of below 4.0L or 12V diesel vehicles with a displacement of less than 2.5L |
| Item Weight | 363g |
| Dimensions | 160mm x 85mm x 30mm |
Image: Product parameters table and dimensions of the Baseus jump starter.
5. Setup
5.1 Initial Charging
Before first use, fully charge the jump starter. Connect the included USB-C cable to the Type-C input port on the jump starter and to a compatible USB power adapter (not included). The device charges using a standard USB connection, similar to a mobile phone. A 5V/2A charger will fully charge the device in approximately 4 hours and 40 minutes.
6. Operating Instructions
6.1 Jump Starting a Vehicle
Follow these three easy steps for jump-starting your vehicle:
- Connect: Insert the intelligent ignition clamps into the EC5 interface of the jump starter. The clamp indicator will flash in red and green alternately.
- Clip: Open the hood of your vehicle. Clip the positive (red) ignition clamp to the positive (+) terminal of your car's battery and the negative (black) ignition clamp to the negative (-) terminal of your car's battery.
- Start: Get into the car and start the engine. Once the engine starts, immediately remove the jump starter from the battery terminals.
Warning: Make sure the red clamp of the jumper cables is connected to the positive terminal of the battery and the black clamp is connected to the negative terminal; reverse connection may cause irreversible damage.
Image: Three-step diagram illustrating the connection and starting process for jump-starting a car.
Video: Demonstration of the Baseus Super Energy Air Car Jump Starter in action, including correct and incorrect connection methods.
6.2 Using as a Power Bank
The jump starter can also function as a power bank to charge your mobile devices. Connect your device's charging cable to the USB-A or Type-C output port on the jump starter. The USB-A and Type-C ports both provide 5V/2.4A (Max) output.
Image: Close-up view of the USB and Type-C ports on the Baseus jump starter, highlighting its power bank functionality.
6.3 Emergency Lighting
The device includes a built-in flashlight with three lighting modes:
- Flashlight (Always On): Press the power button for 3 seconds to turn on the flashlight.
- SOS Mode: Press the power button again (after turning on the flashlight) to activate SOS mode (three long flashes, three short flashes). This light conforms to the international SOS mode.
- Flashing Light Mode: Press the power button a third time to activate the alternating scintillation flashing light mode.
Image: Baseus jump starter being used as a flashlight to illuminate a car engine compartment in the dark.
Image: Diagram illustrating how to activate and cycle through the Flashlight, SOS, and Flashing light modes.
7. Maintenance
- Keep the device clean and dry.
- Store in a cool, dry place away from direct sunlight and extreme temperatures. The device is designed to operate even at -20°C and up to 60°C, but prolonged exposure to extremes should be avoided.
- Recharge the jump starter periodically, even if not in use, to maintain battery health. It retains approximately 85% of its charge after 9 months of idle time, but regular charging is recommended.
- Do not attempt to disassemble or modify the device.
Image: Baseus jump starter on a car seat, highlighting its low power consumption and long battery life (approx. 270 days standby).
8. Troubleshooting
- Device not charging: Ensure the USB-C cable is properly connected to both the jump starter and the power adapter. Try a different cable or adapter. If the issue persists, contact customer support.
- Jump starter not activating/indicator light not working: Check if the clamps are correctly inserted into the EC5 interface. Ensure the jump starter has sufficient charge.
- Red light and beeping sound when connecting to car battery: This indicates an incorrect connection (e.g., reverse polarity or both clamps on the same terminal). Disconnect immediately and re-connect the clamps correctly (red to positive, black to negative).
- Car not starting after jump-start attempt: Ensure the jump starter is fully charged. Verify that the clamps have a secure connection to the battery terminals. If the car still doesn't start, there might be a more significant issue with the car battery or engine, and professional assistance may be required.
9. User Tips
- This jump starter is effective even in cold winter conditions, with users reporting successful starts for multiple vehicles on a single charge.
- It can be used to jump-start motorcycles, provided they use a 12V battery system.
- Note that this device functions as a starting aid and power bank; it does not have a tire inflation feature.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Baseus website or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
