Introduction
The LEKATO WS-50 is a 5.8GHz wireless guitar system designed to provide high-quality, cable-free audio transmission for various electric musical instruments. Featuring 24-bit 48KHz audio broadcasting and ultra-low latency, it ensures a clear signal without interference. Its plug-and-play design, long-lasting rechargeable battery, and rotatable plug make it a versatile and convenient solution for musicians.
Package Contents
Upon unboxing your LEKATO WS-50 Wireless Guitar System, you should find the following items:
- 1 x Wireless Guitar Transmitter
- 1 x Wireless Guitar Receiver
- 1 x Double-headed USB Charging Cable
- 1 x User Manual

Product Features
- Plug & Play: Simple setup with no complex configurations.
- Clear Signal Transmission: 24-bit 48KHz high-quality audio broadcasting.
- Ultra-Low Latency: Less than 4ms latency ensures no noticeable lag or signal loss.
- Extended Range: Effective range of up to 50 meters (no obstacle) and 30 meters (through-wall).
- Multi-Channel Support: Supports simultaneous broadcasts on 4 channels, allowing up to four units to be used in a band with each performer using a different channel.
- Rechargeable Battery: Built-in 3.7V 600mAh rechargeable lithium battery provides up to 5 hours of playing time on a full charge.
- Rotatable Plug Design: 220° rotatable plug for compatibility with most electric guitars, bass, electric-acoustic guitars, and other instruments with electric pickups.
- Worldwide License-Free: Operates on the 5.8GHz ISM band, approved for use globally.










Setup Instructions
- Charge the Units: Before first use, ensure both the transmitter and receiver are fully charged using the provided double-headed USB cable. The red indicator light will turn off when charging is complete.
- Connect Transmitter: Plug the transmitter unit into the output jack of your instrument (e.g., electric guitar, bass, acoustic-electric guitar). The 220° rotatable plug allows for optimal positioning.
- Connect Receiver: Plug the receiver unit into the input jack of your amplifier, mixer, or audio interface.
- Power On: Switch both the transmitter and receiver units ON.
- Pairing (Initial Setup or Reset): If the units do not connect automatically or if you are using them for the first time, you may need to perform ID pairing. Long press the signal key on both the transmitter and receiver simultaneously until they pair. The system should automatically set up the channel.
- Ready to Play: Once paired, the green indicator light will be solid, and the system is ready for use.
Operating Instructions
- Power On/Off: Use the ON/OFF switch on each unit to power them on or off.
- Channel Selection: The system supports 4 channels for simultaneous use. To select a channel, click the signal button on the unit. This allows multiple wireless systems to operate in the same area without interference.
- Indicator Lights:
- Green Light: Indicates a strong signal connection.
- Red Light: Indicates low battery or that the unit is currently charging. The red light will turn off once fully charged.
- Playing: Once both units are powered on and paired, you can begin playing your instrument wirelessly.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or solvents.
- Storage: Store the units in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Charge the units regularly, especially if they will not be used for an extended period.
- Environmental Factors: Keep the transmitter and receiver away from strong magnetic fields and other wireless equipment (like Wi-Fi routers) during operation to prevent interference.
Troubleshooting
- No Sound/Signal Loss:
- Ensure both the transmitter and receiver are powered on and fully charged.
- Verify that both units are properly plugged into the instrument and amplifier/mixer.
- Check the indicator lights: if red, charge the units. If green, but no sound, try re-pairing.
- Perform ID pairing to reset the connection (long press the signal key on both units simultaneously).
- Ensure there are no strong sources of interference (e.g., Wi-Fi routers, other wireless devices, strong magnetic fields) nearby.
- Check the distance between the transmitter and receiver; ensure it's within the effective range.
- Interference/Noise:
- Change the channel on both the transmitter and receiver to find a clearer frequency.
- Move the units further away from other wireless devices or electronic equipment that might be causing interference.
- Ensure the units are not in close proximity to strong magnetic fields.
- Short Battery Life:
- Ensure the units are fully charged before use.
- Battery performance can degrade over time; if significantly reduced, consider contacting support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | WS-50 |
| Type | Guitar Transmitter Receiver |
| Brand Name | LEKATO |
| Origin | Mainland China |
| Suitable For | Electric Guitar, Bass Guitar, Electric Acoustic Guitar, any instrument with an electric pickup |
| Frequency | UHF, 5.8GHz ISM band |
| Transmission Range | Max. 50M (No obstacle), 30M (through-wall) |
| Transmission Delay | <4ms |
| Power Supply | Built-in 3.7V 600mAh rechargeable lithium battery |
| Charge Port | Micro USB |
| Channels | 4 (supports simultaneous broadcasts) |
| Input Impedance | 220kΩ |
| Distortion | <0.02% |
| Battery Life | Over 5 hours playing time (fully charged) |
| Dynamic Range | Superior 110 dB |
Warranty and Support
For any issues, technical support, or questions regarding your LEKATO WS-50 Wireless Guitar System, please contact the customer service team. They are committed to replying within 24 hours to assist you.