Baseus I-wok series USB stepless dimming screen hanging light (youth)

Contents

Baseus I-wok Series USB Stepless Dimming Screen Hanging Light (Youth)

Model: I-wok Series (Youth)

1. Introduction

The Baseus I-wok series USB stepless dimming screen hanging light is designed to provide optimal illumination for your workspace without causing screen glare. Its thoughtful design allows for secure fixation on most monitors, ensuring an ergonomic setup that doesn't interfere with your computer work. Featuring adjustable brightness and light temperature, this light is an excellent solution for various tasks, from graphic design to everyday use, enhancing monitor brightness and reducing eye strain.

2. Package Contents

Please check the package for the following items:

  • Baseus I-wok Series USB Stepless Dimming Screen Hanging Light
  • USB-C Power Cable
Baseus I-wok light bar and USB-C cable
Figure 2.1: Contents of the package, showing the light bar and its USB-C power cable.

3. Setup Instructions

  1. Unpack the Device: Carefully remove the screen hanging light and USB-C cable from the packaging.
  2. Position the Light: Place the light bar on top of your monitor. The adjustable clamp mechanism is designed to securely grip the top edge of most monitors.
  3. Baseus I-wok light mounted on top of a monitor, showing the clamp mechanism
    Figure 3.1: The Baseus I-wok light mounted on a monitor.
  4. Adjust the Clamp: Ensure the clamp is firmly seated on the monitor. The counterweight at the back helps stabilize the light.
  5. Close-up of the Baseus I-wok light's adjustable clamp mechanism from the side
    Figure 3.2: Side view of the adjustable clamp mechanism.
  6. Connect Power: Plug the USB-C end of the provided cable into the light bar and the USB-A end into an available USB port on your computer, monitor, or a USB power adapter (not included).
  7. Baseus I-wok light mounted on a monitor, with a keyboard and mouse on the desk
    Figure 3.3: The light installed and ready for use in a typical desktop setup.

4. Operating Instructions

The Baseus I-wok light features intuitive touch controls located on the top of the light bar.

Top view of the Baseus I-wok light bar, showing the touch controls for brightness and color temperature
Figure 4.1: Touch controls for brightness and color temperature.
  • Power On/Off: Tap the power icon (usually the leftmost icon) to turn the light on or off.
  • Stepless Dimming: Press and hold the brightness control icon (often represented by a sun or light bulb symbol) to continuously adjust the brightness level. Release when the desired brightness is achieved.
  • Color Temperature Adjustment: Tap the color temperature icon (often represented by a color spectrum or temperature gauge) to cycle through different color temperature presets (e.g., warm, neutral, cool white). Some models may allow stepless adjustment by pressing and holding.

5. Maintenance

To ensure the longevity and optimal performance of your Baseus I-wok screen hanging light, follow these simple maintenance guidelines:

  • Cleaning: Gently wipe the light bar and clamp with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemical solutions, as these can damage the finish and electronic components.
  • Dust Removal: Periodically remove any dust accumulation from the light source and housing to maintain light output efficiency.
  • Storage: If storing the light for an extended period, ensure it is clean and dry, and store it in a cool, dry place away from direct sunlight.

6. Troubleshooting

Problem Possible Cause Solution
Light does not turn on. No power or loose connection. Ensure the USB-C cable is securely connected to both the light and the power source. Try a different USB port or power adapter.
Brightness/Color temperature not adjusting. Incorrect operation or temporary glitch. Refer to the 'Operating Instructions' section. Try unplugging and re-plugging the power cable to reset the device.
Light flickers. Unstable power supply. Ensure the power source provides stable output. Try connecting to a different USB port or a dedicated USB power adapter.
Light falls off the monitor. Improper installation. Re-position the light, ensuring the clamp is securely and evenly seated on the monitor's top edge. Verify the monitor thickness is within the supported range.

7. Specifications

Feature Detail
Brand Baseus
Model Name I-wok series USB stepless dimming screen hanging light (youth)
Color Black
Color Temperature 2800K-5500K
Rated Power 5 W (Max)
Luminous Flux 200 lm
Operating Temperature -20 °C ~ +55 °C
Material Aluminum Alloy + Plastic
Dimensions 450 x 66 x 92 mm
Weight 480 g

8. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.