1. Product Overview
The LED Fiber Optic Whip is a dynamic lighting accessory designed for dance, parties, light shows, and music festivals. It features intelligent programmable LED lights with 40 display modes, a 360-degree swivel head, and a durable aluminum handle.


2. Features
- 40 Display Modes: Includes 20 jump modes, 10 fade modes, and 10 static color modes for versatile lighting effects.
- Full Size Fiber Optic: Composed of 160 pieces of 0.75mm end-glow fiber optic strands, ranging in length from 25cm to 150cm.
- 360 Degree Free Rotation: The head of the powerhouse handle can swivel 360 degrees, allowing for dynamic movement.
- One-Button Operation: Simple and intuitive control for changing modes.
- Battery Operated: Requires 3 AAA batteries (not included).
- Durable Construction: Features a black aluminum shell, designed for resilience.
- Water Resistant: The handle is designed to be water resistant.
3. Specifications
| Attribute | Value |
|---|---|
| Item Name | LED Fiber Optic Flashlight Whip |
| Power | 3W |
| Voltage | 12V |
| Power Source | 3 x AAA DRY BATTERY (Not included) |
| Display Modes | 40 (20 Jump, 10 Fade, 10 Static Color) |
| Fiber Optic Quantity | 160pcs (0.75mm diameter) |
| Fiber Optic Length | 25cm ~ 150cm (end glow) |
| Handle Material | Black Aluminum Shell |
| Handle Dimensions | 170mm (L) x 36mm (D) |
| LED Lamp Lifespan | 100,000 Hours |
| Luminous Flux | <60 |
| Certification | CE |



4. Setup
4.1 Battery Installation
- Twist the cover at the end of the powerhouse handle to open the battery compartment.
- Remove the empty battery pack.
- Insert 3 AAA batteries into the battery pack, ensuring correct positive (+) and negative (-) directions.
- Place the loaded battery pack back into the powerhouse.
- Install the cover by twisting it back on securely.

5. Operating Instructions
5.1 Power On/Off
- The power switch is located at the end of the powerhouse handle (Master ON/OFF).
- Short press this button to turn the device ON or OFF. When turned ON, the Color Flash Light (CFL) will emit a bright white light initially.
5.2 Changing Display Modes
The button in the middle of the powerhouse handle is used to change modes.
- To change between FADE, JUMP, and STATIC COLOR modes: Press and hold the middle button for 2 seconds.
- To change effects within the current mode: Short press the middle button. For example, if you are in FADE mode, a short press will cycle through the 10 different FADE effects.

5.3 Mode Sequences
The whip features 40 distinct display modes:
- 20 Jump Modes
- 10 Fade Modes
- 10 Static Color Modes
The rapid gradual change sequence includes: White-Red-Green-Blue-Orange-Light Green-Purple-Yellow-Light blue-Pink Red-Flash-Fade.


5.4 Product Demonstration Video
6. Maintenance
6.1 Fiber Optic Care
- Cleaning: Clean the fiber or fiber cover with warm water only. Always use a microfiber or soft cloth rag that will not scratch. Scratching can reduce light output.
- Handling: Do not bend, fold, or braid the fiber or blade. This can weaken the fiber and lead to breaks.
- Holding: Always hold the product by the powerhouse base. Never swing the product by the fiber or blade, as this can risk serious injury or damage to your product.
- Environment: Be aware of your surroundings at all times and refrain from hitting objects or people while performing.
- Temperature Exposure: Do not leave your product exposed to high temperatures, such as in a hot car, direct sunlight, or other heated areas. Exposure will damage the fiber and shorten the product's life.
6.2 Powerhouse Care & Storage
- Low Battery Detection: The fiber will glow red when the batteries are too low and need to be replaced.
- Impact: Avoid hitting the powerhouse against anything.
- Power Off: Turn the powerhouse off using the Master On/Off switch when not in use to extend battery life.
- Storage: Store your product in a cool, dry place. Preventing prolonged heat and moisture exposure will extend the life of the fiber and electronics.
7. Troubleshooting
- No Light, Flickering, or Unexpected Shutdown:
- Red Glow: If the fiber glows red, the battery is low. Insert three new AAA batteries.
- Battery Installation: Remove the battery pack and ensure batteries are installed correctly with the proper positive and negative directions.
- Handle Tightness: Make sure the handle is screwed together tightly in both the top and bottom sections. Note: Always unscrew your product from the bottom only, never from the top of the powerhouse.
- Flickering Light: Try placing a couple of pennies between the battery pack and the spring to ensure a secure connection.
- Persistent Issues: If you continue to experience problems after following these steps, please contact customer support for assistance.
8. User Tips
- For optimal performance and battery life, always use fresh, high-quality AAA batteries.
- Practice in an open space to fully appreciate the 360-degree rotation and avoid accidental impacts.
- Experiment with different mode combinations to create unique light shows for various music genres and events.
9. Safety Warnings
WARNING:
- Adult Supervision: Under 18-Adult Supervision Required.
- Eye Protection: Wear proper eye protection at all times.
- Use at Your Own Risk: Read all warnings before use. Use this product at your own risk.
- Intended Use: This Space Fiber Product is designed and manufactured as a novelty toy. It is NOT to be used for actual whipping, sword fighting, or as a weapon or tool of any kind.
- Not a Children's Toy: This is not a kid's toy and may contain small parts that could pose a choking hazard.
- Awareness: It is important to use common sense at all times and take necessary precautions when using your Space Fiber Product in the presence of others.
- Maintain Control: Always maintain control of your Space Fiber Product.
- Space Requirements: Do not use your Space Fiber Product in small rooms or when in close quarters with others.
- Modification: Do not attempt to modify or disassemble the product.
- Strobing Lights: This product emits bright strobing lights which may cause seizures in susceptible individuals. Use care and caution at all times.
10. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or any questions not covered in this manual, please refer to the official product page or contact the seller directly.
A detailed user manual in PDF format is available for download: User Manual (PDF)