EPever DR1206N DR1106N DuoRacer Series

Contents

EPever DuoRacer Series MPPT Dual Battery Charge Controller

Models: DR1206N, DR1106N

User Manual

1. Overview

The EPever DuoRacer series MPPT dual battery charge controller is designed for off-grid solar systems, ideal for applications such as motorhomes, RVs, campers, and boats. It efficiently charges the main battery (BATT1) for primary power needs and simultaneously provides trickle charging (up to 1A) to the start battery (BATT2) of vehicles.

EPever DuoRacer MPPT Dual Battery Charge Controller, angled view

Figure 1: EPever DuoRacer MPPT Dual Battery Charge Controller (Angled View)

2. Key Features

  • Maximum Power Point Tracking (MPPT) technology with ultra-fast tracking speed and efficiency no less than 99.5%.
  • Advanced MPPT control algorithm to minimize power loss and optimize charging time.
  • Wider range of MPP operation voltage to improve PV module utilization.
  • Charging power and charging current limit function for BATT1.
  • Constructed with high-quality, low-failure-rate components.
  • Digital circuit control for adaptive three-stage charging mode.
  • BATT1 battery type can be configured via LED/LCD display.
  • Low self-consumption mode activates if PV voltage is below 5V and no manual operation occurs for a period.
  • Ensures 100% charging and discharging within the specified operating environmental temperature range.
  • Optional LED and LCD display units.
  • AES control signal for car refrigerators to prevent energy waste.
  • Standard Modbus protocol and RS485 (5V/200mA) communication port for expanded application areas.

3. Available Models

The DuoRacer series includes the following models, primarily differentiated by their current ratings and specific features:

  • DR1106N-DDS (10A): A 10 Ampere model.
  • DR1206N-DDS (10A): Another 10 Ampere model, potentially with slight variations in features or form factor.

Refer to the Technical Specifications section for detailed differences between models.

4. Typical Applications

The EPever DuoRacer series is versatile and suitable for various off-grid solar power systems:

  • Recreational Vehicles (RVs), Motorhomes, Campers: Ideal for managing power to both living and starting batteries.
  • Boats: Provides reliable charging for marine applications.
  • Solar Cars: Supports power management in solar-powered vehicles.
  • Solar Backpacks: Can be integrated into portable solar power solutions.
Application icons for Solar Car, Solar Backpack, Solar Boat, and three controller models

Figure 2: Diverse applications of the DuoRacer series, including solar cars, backpacks, and boats.

5. Setup and Installation

5.1 Safety Precautions

  • Ensure all power sources are disconnected before installation.
  • Use appropriate tools and wear protective gear.
  • Verify correct polarity for all connections to prevent damage to the controller and batteries.
  • Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
  • Ensure all wiring is securely fastened and of the correct gauge for the expected current.

5.2 Mounting the Controller

Mount the controller vertically on a solid surface, ensuring adequate clearance around the unit for heat dissipation. Use the mounting holes provided on the controller's casing.

5.3 Wiring Diagram and Connection Steps

Follow the connection order below to ensure safe and proper operation. Connect in the reverse order when disconnecting.

  1. Connect Battery 1 (BATT1): Connect the positive and negative terminals of your main battery (BATT1) to the corresponding BATT1+ and BATT1- terminals on the controller.
  2. Connect Battery 2 (BATT2): Connect the positive and negative terminals of your start battery (BATT2) to the corresponding BATT2+ and BATT2- terminals on the controller.
  3. Connect Solar Panel (PV): Connect the positive and negative terminals of your solar panel array to the PV+ and PV- terminals on the controller.
  4. Connect Optional Accessories: If using, connect the remote meter (e.g., MT11) or other communication modules to the RS485 port. If applicable, connect the AES control signal for a car refrigerator.
Wiring diagram for EPever DuoRacer controller in an RV, showing connections for PV, BAT1, BAT2, MT11, and Refrigerator

Figure 3: Typical wiring diagram for the DuoRacer controller in an RV setup.

Bottom view of the controller showing PV, BAT1, BAT2, and RS485 terminals

Figure 4: Bottom view of the controller with terminal connections.

Important: Always connect batteries before the solar panel, and disconnect the solar panel before batteries.

6. Operation

6.1 Display and Buttons

The controller features an intuitive display (LED/LCD, depending on model) and control buttons for monitoring and configuration.

Front view of the controller with LCD display showing various parameters and 'MENU', 'DOWN/SET' buttons

Figure 5: Controller front panel with display and control buttons.

  • MENU Button: Used to navigate through different display screens and enter settings menus.
  • DOWN/SET Button: Used to scroll down through options, adjust values, or confirm selections.

6.2 Monitoring Parameters

The display provides real-time information on your solar system's performance, including:

  • PV voltage and current (V, A)
  • Battery 1 (BATT1) voltage and charging current
  • Battery 2 (BATT2) trickle charge status
  • Accumulated energy (WH, KWH)
  • Battery type (Batt.Type)
  • Minimum and Maximum values (Min, Max)
  • Battery state of charge (%)

6.3 Setting Battery Type (BATT1)

The controller supports various battery types for BATT1. Refer to the detailed manual (if available) for specific steps to set the BATT1 type via the LED/LCD display using the MENU and DOWN/SET buttons. Incorrect battery type settings can lead to improper charging and reduced battery lifespan.

6.4 Charging Modes

The controller utilizes an adaptive three-stage charging mode (Bulk, Absorption, Float) to optimize battery health and lifespan. It also features a charging power and current limit function for BATT1.

6.5 Low Self-Consumption Mode

To conserve energy, the controller will enter a low self-consumption mode if the PV voltage drops below 5V and there is no manual operation for a certain period.

6.6 AES Control Signal

The AES control signal can be used to manage a car refrigerator, preventing unnecessary energy consumption and optimizing power usage in mobile applications.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your DuoRacer charge controller:

  • Inspect Connections: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and power loss.
  • Clean Terminals: Ensure battery and solar panel terminals are clean and free of rust or dirt.
  • Controller Cleaning: Keep the controller's casing clean and free of dust. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
  • Ventilation: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow around the controller's heatsink.
  • Environmental Check: Monitor the operating environment to ensure it stays within the specified temperature and humidity ranges.

8. Troubleshooting

If you encounter issues with your DuoRacer charge controller, consider the following common troubleshooting steps:

  • No Display/No Power:
    • Check battery connections (BATT1 and BATT2) for proper polarity and secure contact.
    • Ensure battery voltage is above the minimum operating voltage for the controller.
  • No Charging from PV:
    • Verify solar panel connections and polarity.
    • Check PV voltage to ensure it is within the controller's input voltage range and sufficient for charging.
    • Ensure there is adequate sunlight reaching the solar panels.
    • Check for any shading on the solar panels.
  • Low Charging Current:
    • Confirm the solar panel's output is as expected.
    • Check for partial shading on the solar panels.
    • Ensure the battery type setting for BATT1 is correct.
    • Verify wire gauges are sufficient for the current.
  • Battery Overcharging/Undercharging:
    • Double-check the BATT1 battery type setting.
    • Ensure temperature compensation is functioning correctly (if applicable).
  • Communication Issues (RS485/MT11):
    • Verify cable connections and ensure they are secure.
    • Check for correct communication settings on both the controller and the connected device.

For persistent issues, consult the full product manual or contact EPever customer support.

9. Technical Specifications

The following table details the technical specifications for the 10A models of the DuoRacer series:

ParameterDR1106N-DDB/DDS (10A)DR1206N-DDB/DDS (10A)
BATT1 rated voltage12VDC12VDC
BATT2 rated voltage12VDC12VDC/24VDC/Auto
BATT1 rated charge current10A10A
BATT2 rated charge current1A1A
Max. PV open circuit voltage60V (At minimum operating environment temperature)
46V (At 25°C environment temperature)
60V (At minimum operating environment temperature)
46V (At 25°C environment temperature)
MPP voltage range(Battery Voltage+2V) ~ 36V(Battery Voltage+2V) ~ 36V
Rated charge power130W/12V130W/12V
Max. conversion efficiency96.30%97%
Full load efficiency95.50%96%
Self-consumption12mA/12V; 6mA/12V (Low-power mode)12mA/12V; 6mA/12V (Low-power mode)
Temperature compensation-3mV/°C/2V (default)-3mV/°C/2V (default)
GroundingCommon negativeCommon negative
BATT2 full voltage13.8V/12V13.8V/12V; 27.6V/24V (default)
BATT2 charge return voltage13V/12V13V/12V; 26V/24V (default)
Operating temperature range-20°C ~ +50°C (DDS)
-30°C ~ +50°C (DDB)
-20°C ~ +50°C (DDS)
-30°C ~ +50°C (DDB)
EnclosureIP33IP33
Dimension (LxWxH)227.2x143x58 mm227.2x143x58 mm
Net weight0.8kg0.8kg
Full technical specifications table for DuoRacer series controllers

Figure 6: Comprehensive technical specifications for the DuoRacer series.

10. User Tips

  • Optimize Panel Orientation: Ensure your solar panels are optimally angled towards the sun for maximum power generation, especially important for MPPT controllers.
  • Monitor Battery Health: Regularly check the voltage and health of both BATT1 and BATT2. While the controller manages charging, external monitoring can provide additional insights.
  • Consider Remote Monitoring: If your model supports it, utilizing the RS485 communication port with a remote meter (like MT11) or a PC monitoring software can provide detailed performance data and easier configuration.
  • Prevent Over-Discharge: While the controller protects against overcharging, ensure your load management prevents deep discharge of batteries, which can shorten their lifespan.
  • Environmental Protection: Although rated IP33, consider additional protection from harsh weather conditions (heavy rain, direct prolonged sun exposure) to extend the controller's life.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official EPever website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.