M5Stack A099

Contents

M5Stack Grove to 4 Pin Connector (10pcs)

Model: A099 | Brand: M5Stack

Introduction

The M5Stack Grove to 4 Pin Connector is a versatile adapter designed to bridge the gap between Grove-compatible devices and standard prototyping environments. This connector set allows you to easily convert the HY2.0-4P Grove interface to a standard 2.54mm pin header, enabling seamless integration with breadboards, custom PCBs, or other modules using DuPont cables. Each package contains 10 units of these connectors, providing ample supply for multiple projects.

Product Features

  • Converts HY2.0-4P Grove interface to 2.54mm pin header.
  • Facilitates connection of Grove sensors to standard development boards via DuPont cables.
  • Compact and lightweight design.
  • Designed for Internet of Things (IoT) applications and prototyping.

Package Contents

Each package includes:

  • 10 x M5Stack Grove to 4 Pin Connectors (Model A099)
Package containing 10 M5Stack Grove to 4 Pin Connectors
Image: Contents of the M5Stack Grove to 4 Pin Connector package.

Setup and Installation

The Grove to 4 Pin Connector is designed for straightforward integration into your electronic projects. Follow these steps to connect your Grove modules:

  1. Identify Connector Sides: The connector has two distinct sides:
    • One side features a white HY2.0-4P connector, compatible with standard Grove cables.
    • The other side features four individual pins with 2.54mm spacing, suitable for DuPont cables or direct insertion into breadboards.
  2. Connect Grove Module: Plug your Grove-compatible sensor or module's cable into the HY2.0-4P side of the Grove to 4 Pin Connector. Ensure the connection is firm.
  3. Connect to Development Board/Breadboard: Use standard DuPont jumper wires to connect the 2.54mm pins of the adapter to your microcontroller, development board (e.g., Arduino, ESP32), or breadboard. Pay close attention to the pinout for correct voltage (5V), ground (GND), and signal lines.
M5Stack Grove to 4 Pin Connector showing HY2.0-4P and 2.54mm pin labels
Image: Front view of the connector, highlighting the HY2.0-4P and 2.54mm pin interfaces.
M5Stack Grove to 4 Pin Connector back view showing 5V and GND labels
Image: Back view of the connector, indicating 5V and GND pins for proper wiring.

Operating Instructions

This connector is a passive adapter and does not require any specific operating instructions beyond proper physical connection. Once connected, it simply acts as a conduit, allowing electrical signals and power to pass between your Grove module and your development board. Ensure that the power supply and signal lines are correctly matched according to the pinout of your Grove module and development board to prevent damage.

Maintenance

The Grove to 4 Pin Connector requires minimal maintenance. To ensure longevity and reliable performance:

  • Keep the connectors clean and free from dust, dirt, and moisture.
  • Avoid applying excessive force when connecting or disconnecting cables to prevent damage to the pins or plastic housing.
  • Store unused connectors in a dry, anti-static environment.

Troubleshooting

If you encounter issues when using the connector, consider the following:

  • No Signal/Power:
    • Verify that all connections are secure and correctly seated.
    • Double-check the pinout to ensure that 5V, GND, and signal lines are connected to the appropriate pins on both the Grove module and the development board. Incorrect wiring can lead to non-functionality or damage.
    • Test the Grove module directly with a compatible Grove port if available, to rule out issues with the module itself.
  • Loose Connections: If connections feel loose, ensure you are using appropriate DuPont cables that provide a snug fit onto the 2.54mm pins.

Specifications

Table of specifications for M5Stack Grove to 4 Pin Connector
Image: Detailed specifications of the Grove to 4 Pin Connector.
Resource Parameter
PIN pin spacing 2.54mm
Net weight (per pcs) 12.32g
Gross weight (10pcs) 124g
Product size (per pcs) 25.34*10.27*1mm
Package size 136*92*12mm
Battery Included No
Typical Application Fields Internet of Things (IoT)

User Tips

While this connector is straightforward, here are some tips for optimal use:

  • Always verify the pin assignments (VCC, GND, Signal) of your Grove module and target development board before making connections to avoid potential damage.
  • For robust connections, consider using high-quality DuPont cables that provide a snug fit on the 2.54mm pins.
  • When working with multiple connectors, labeling your connections can help prevent errors and simplify debugging.

Warranty and Support

For any technical assistance, warranty claims, or support inquiries regarding your M5Stack Grove to 4 Pin Connectors, please contact the M5Stack Official Store or refer to their official website for detailed support information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.