1. Introduction
The LEKATO Loop Auto Effector Pedal is a compact and versatile looper designed for electric guitars and synthesizers. It offers high-quality audio recording, multiple loop slots, and intuitive controls for musicians to create and layer their performances. This manual provides detailed instructions for setting up, operating, and maintaining your looper pedal.
2. Features
- True Bypass for preserving original tone.
- 48K/24bit sampling rate, lossless, uncompressed, professional tone quality.
- Durable Zinc Alloy shell and compact size for portability.
- Single control knob for Level (loop playback volume).
- 9 Loop effects (1.wav to 3.wav), with the longest single track being 6 minutes and 12 seconds, and a total recording time of 18 minutes.
- SYNC mode that avoids missing any moment during recording.
- Built-in high sensitivity tuning function.
- Support for Windows and Mac OS computers to import and export WAV lossless audio files via USB.
- Colorful LED display showing recording/playback progress, loop number, and tuning status.
- Single footswitch for controlling looper functions: record, playback, overdub, undo, redo, stop, and delete.

3. Package Contents
Please check the package contents upon unboxing:
- 1 x LEKATO Loop Auto Effector Pedal
- 1 x USB Cable
- 1 x User Manual

4. Setup
4.1 Power Connection
The LEKATO Loop Auto Effector Pedal requires a DC 9V AC adapter with a center-negative plug. Ensure the power adapter's polarity is correct (positive pole outside, negative pole inside) to prevent damage and ensure proper operation. The power adapter is not included with the pedal.

4.2 Audio Connections
- Connect your instrument (e.g., electric guitar) to the 1/4'' mono audio input jack on the pedal.
- Connect the 1/4'' mono audio output jack of the pedal to your amplifier or other audio equipment.
5. Operating Instructions
The LEKATO Loop Auto Effector Pedal features intuitive controls for various looping functions. Refer to the video demonstration for a visual guide.
5.1 Basic Looping Functions (Footswitch)
- Recording: Tap the footswitch once to start recording.
- Playback: After recording, tap the footswitch once to enter playback mode.
- Overdub: While playing back a loop, tap the footswitch once again to start overdub recording.
- Undo Last Overdub: Press and hold the footswitch (when recording or playing back) to undo the last overdub.
- Redo Previous Overdub: Hold the footswitch again to redo the previously undone overdub.
- Stop: Double-tap the footswitch to stop playback or recording.
- Delete: When the looper is stopped, press and hold the footswitch to delete the current loop.

5.2 Multi-Function Button (Top Button)

- Select Tracks: Press the multi-function button once to switch between the 9 available loop tracks.
- Enter SYNC Mode: Hold the multi-function button for 1 second to enter synchronous recording mode. This automatically starts recording.
- Enter Tuning Mode: Hold the multi-function button for 3 seconds to enter tuning mode.
5.3 Adjusting Loop Playback Volume
Use the "Level" control knob to adjust the playback volume of your loops. Turn clockwise to increase volume, counter-clockwise to decrease.

5.4 Computer Connectivity (USB Interface)
The pedal supports importing and exporting lossless WAV files to and from Windows and Mac OS computers. Connect the pedal to your computer using the provided USB cable.

6. User Tips
- For optimal performance, ensure your instrument cables are in good condition and properly connected to avoid signal loss or noise.
- Experiment with the "Level" knob to find the perfect balance between your live playing and the looped audio.
- Utilize the SYNC mode for precise timing when layering multiple instruments or parts.
- Regularly back up your loops to your computer using the USB interface to prevent accidental loss.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | LEKATO |
| Model Number | Loop Auto Effector Pedal (3 Wave Slot Per 6 Mins) |
| MPN | ARV M00775 |
| Type | Looper, Mixers |
| Analogue/Digital | Digital |
| To Fit | Electric Guitar |
| Material | Zinc Alloy |
| Power Source | AC (DC 9V, Center Negative) |
| Built-in Battery | Yes |
| Inbox Adaptor | No |
| Input | 1/4'' mono audio jack |
| Output | 1/4'' mono audio jack |
| Item Size | 90 x 40 x 49.5mm (3.54 x 1.57 x 1.95in) |
| Item Weight | 199g |
| Certification | CE |
8. Troubleshooting
- No Power: Ensure the DC 9V power adapter is correctly connected and has the specified center-negative polarity. Check the power outlet.
- No Sound: Verify all audio cables (input and output) are securely connected. Check the volume (Level knob) on the pedal and your amplifier.
- Loop Not Recording/Playing: Ensure you are following the correct footswitch commands for recording and playback. Check the LED display for status indicators.
- Distorted Sound: Check your instrument's output level and the pedal's input level. Reduce the "Level" knob if the signal is clipping.
- Computer Not Recognizing Pedal: Ensure the USB cable is properly connected. Try a different USB port or cable. Restart your computer and the pedal.
9. Maintenance
- Keep the pedal clean by wiping it with a soft, dry cloth.
- Avoid exposing the pedal to extreme temperatures, humidity, or direct sunlight.
- Do not use abrasive cleaners or solvents, as they may damage the finish.
- Store the pedal in a safe place when not in use to prevent physical damage.
10. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.