LEKATO MW-1

Contents

LEKATO MW-1 5.8GHz Wireless Microphone System User Manual

Model: MW-1

Introduction

The LEKATO MW-1 is a 5.8GHz wireless microphone system designed to convert your traditional wired dynamic XLR microphone into a wireless setup. It consists of a transmitter and a receiver, offering high-quality audio transmission with low latency, making it suitable for studio recording, live performances, and various audio applications. This manual provides detailed instructions for setting up, operating, and maintaining your MW-1 system.

Key Features

  • 5.8GHz ISM Frequency Band: Ensures stable signal transmission with no signal loss, low noise, and professional sound quality.
  • Plug and Play Design: Specifically designed for dynamic XLR microphones, offering easy connection.
  • Studio Quality Sound: Features 24-bit/48KHz sampling frequency for high-resolution audio.
  • Ultra-Low Latency: Less than 5ms delay time for real-time audio performance.
  • Extended Transmission Range: Reliable transmission distance of up to 100 feet (line-of-sight outdoors).
  • One-Key Pairing: Simple pairing process with 4 switchable channels for automatic matching.
  • Rechargeable Lithium Battery: Built-in batteries provide more than 5 hours of operating time.
  • Multi-Unit Support: Supports up to 4 sets used simultaneously, allowing for one-to-one and one-to-many configurations.

Package Contents

Please check the box for the following items:

  • 1 x LEKATO MW-1 Wireless Microphone System Receiver
  • 1 x LEKATO MW-1 Wireless Microphone System Transmitter
  • 1 x Dual Port USB Charging Cable
  • 1 x User Manual
LEKATO MW-1 Wireless Microphone System box contents
Image: LEKATO MW-1 Wireless Microphone System with its included accessories: transmitter, receiver, USB charging cable, and user manual.

Specifications

FeatureSpecification
ModelMW-1
Power Supply ModeBuilt-in Lithium Battery
Battery Capacity3.7V 400mAh
Operating TimeMore than 5 hours
Reception Sensitivity-85dBm
Frequency Band5.8GHz ISM Frequency
Anti-jamming MethodFrequency Hopping
Signal Distortion<0.02%
Gain0 dB
SNR (Signal-to-Noise Ratio)105dB
Frequency Response20Hz - 20KHz
Delay Time<5ms
Sampling Rate24-bit / 48KHz
Output Impedance680Ω
Port TypeXLR Male Port
Transmission DistanceUp to 100 feet (line-of-sight)
Channels4 switchable channels
CertificationCE
Diagram showing low latency, 100ft transmission, and 24bit/48K sampling frequency
Image: Visual representation of key specifications including low latency (<5ms), transmission range (>100ft), and 24-bit/48KHz sampling frequency.

Setup and Pairing

The MW-1 system is designed for easy setup. The default channel is Channel 1. If you need to use other channels or re-pair the units, follow these steps:

  1. Power On: Turn on both the receiver and the transmitter.
  2. Connect Devices: Connect the receiver to your microphone (XLR input) and the transmitter to your mixer, audio interface, or other audio equipment (XLR output).
  3. Initiate Pairing: Long press the channel switch button on both the receiver and the transmitter. The status indicator will flicker blue, indicating they are in pairing mode.
  4. Successful Pairing: Once successfully paired, the status indicators on both the transmitter and receiver will turn solid blue.
LEKATO MW-1 Transmitter and Receiver showing XLR connections
Image: The LEKATO MW-1 transmitter and receiver units, highlighting their XLR male and female ports for connection to audio equipment.
Diagram showing one-key pairing and channel switching for LEKATO MW-1
Image: Illustration of the one-key pairing function and the ability to switch between 4 channels for automatic matching.

Operating Instructions

Basic Operation

  • Ensure both the transmitter and receiver are fully charged before use.
  • Connect the transmitter to your dynamic microphone and the receiver to your audio input device.
  • Power on both units. They should automatically connect if previously paired, or follow the pairing steps if new or on a different channel.
  • Adjust the volume on your audio input device as needed.
LEKATO MW-1 connected to a microphone and a camera
Image: The LEKATO MW-1 receiver connected to a camera and the transmitter attached to a microphone, demonstrating a typical setup.
LEKATO MW-1 transmitter connected to a microphone on a stand
Image: The LEKATO MW-1 transmitter directly plugged into a dynamic microphone mounted on a stand.

Using Multiple Sets

The MW-1 system supports using up to 4 sets simultaneously. This allows for multiple microphones to be used wirelessly in the same environment, supporting both one-to-one and one-to-many configurations. Ensure each set is paired to a different channel to avoid interference.

Video: A short demonstration of the LEKATO MW-1 Wireless Microphone System's features, including its 5.8GHz frequency band, plug-and-play functionality, studio-quality sound, 100ft transmission distance, one-key pairing, rechargeable battery, and ability to use multiple sets simultaneously.

Charging and Battery Information

The MW-1 system is equipped with built-in rechargeable lithium batteries. To ensure optimal performance and longevity, please observe the following:

  • Battery Level Indicator: When you turn on the units, the status indicators will show the current battery level.
  • Low Battery Warning: If the status indicator starts to flicker red, it signifies a low battery and the unit needs to be charged.
  • Charging Status: While charging, the status indicator will be red. It will turn off once the unit is fully charged.
  • Simultaneous Charging: You can charge both the transmitter and receiver simultaneously using the provided Dual Port USB Charging Cable.
LEKATO MW-1 units charging with dual USB cable
Image: The LEKATO MW-1 transmitter and receiver being charged simultaneously using the dual USB charging cable.

User Tips

  • Battery Life: The transmitter typically provides about 5.5 hours of operation on a full charge, while the receiver, having lower power consumption, can run longer.
  • Dynamic Microphones Only: This system is designed for dynamic microphones and does not provide 48V phantom power, so it is not compatible with condenser microphones that require external power.
  • Minimal Latency: Users report no noticeable delay in sound transmission, ensuring a responsive audio experience.
  • Mixer to PA Speaker: The system is effective for transmitting sound from a mixer to a PA speaker, providing a clear and stable signal.

Troubleshooting

  • No Sound/Interference:
    • Ensure both units are powered on and fully charged.
    • Verify that the transmitter and receiver are correctly paired and on the same channel (solid blue indicator).
    • Check that the microphone and audio equipment are properly connected to the respective units.
    • If using multiple sets, ensure each set is on a different channel to prevent interference.
    • Move closer to the receiver if you are at the edge of the 100ft transmission range or if there are significant obstacles.
  • Short Battery Life:
    • Ensure units are fully charged before each use.
    • Avoid operating the units while connected to the charger for extended periods, as this can affect battery longevity.
  • Not Working with Condenser Microphone:
    • The MW-1 system does not provide phantom power. It is designed for dynamic microphones only. Condenser microphones requiring 48V phantom power will not function with this system.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the units. Do not use abrasive cleaners or solvents.
  • Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Battery Care: For long-term storage, charge the batteries to about 50% every few months to maintain battery health.
  • Handling: Handle the units with care to avoid physical damage.

Warranty and Support

LEKATO products are manufactured to high-quality standards. For any issues or questions regarding your MW-1 Wireless Microphone System, please refer to the contact information provided with your purchase or visit the official LEKATO support website. Keep your proof of purchase for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.